(TXT) View Source
# PROMETHEUS PRODUCTS, INC.
CYBERSTERO PC144IVA, CYBERSTERO PC144IVSPA
Card Type Fax, Modem (asynchronous), Sound card
Chip Set Unidentified
I/O Options Audio line in, Audio line out, CD-ROM
interface, Microphone, MIDI/game port,
Speakerphone
Maximum Modem Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Bus 16-bit ISA
Fax Class Class II
Data Modulation Bell 103/212A
Protocol
ITU-T V.22, V.22bis, V.32, V.32bis
Fax Modulation ITU-T V.27ter, V.29
Protocol
Error MNP5, V.42, V.42bis
Correction/Compression
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| CD-ROM connector | CN1 | Microphone | CN5 |
|--------------------------+---------+----------------+------|
| Audio line out | CN2 | Audio line in | CN6 |
|--------------------------+---------+----------------+------|
| Phone line out | CN3 | MIDI/game port | CN7 |
|--------------------------+---------+----------------+------|
| Phone line in | CN4 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DMA CHANNEL SELECTION |
|------------------------------------------------------------|
| Channel | JB4/I | JB4/J | JB4/K | JB4/L |
|------------+-----------+-----------+-----------+-----------|
| 0 | Off | On | On | Off |
|------------+-----------+-----------+-----------+-----------|
| í 1 | On | Off | Off | On |
|------------+-----------+-----------+-----------+-----------|
| 3 | On | Off | On | Off |
|------------+-----------+-----------+-----------+-----------|
| None | Off | On | Off | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| I/O ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | JB4/A | JB4/B | JB4/C | JB4/D |
|------------+-----------+-----------+-----------+-----------|
| 220 | Off | On | Off | On |
|------------+-----------+-----------+-----------+-----------|
| 230 | Off | On | On | Off |
|------------+-----------+-----------+-----------+-----------|
| í 240 | On | Off | Off | On |
|------------+-----------+-----------+-----------+-----------|
| 250 | On | Off | On | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | JB4/E | JB4/F | JB4/G | JB4/H |
|------------+-----------+-----------+-----------+-----------|
| í IRQ5 | Off | On | On | Off |
|------------+-----------+-----------+-----------+-----------|
| IRQ7 | On | Off | Off | On |
|------------+-----------+-----------+-----------+-----------|
| IRQ9 | Off | On | Off | On |
|------------+-----------+-----------+-----------+-----------|
| IRQ10 | On | Off | On | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| JOYSTICK CONTROL |
|------------------------------------------------------------|
| Setting | JB4/M | JB4/N |
|--------------------+-------------------+-------------------|
| í Enabled | On | Off |
|--------------------+-------------------+-------------------|
| Disabled | Off | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MODEM CONTROL |
|------------------------------------------------------------|
| Setting | JB1/Pins 1 & 2 | JB1/Pins 3 & 4 |
|------------------+--------------------+--------------------|
| í Enabled | Closed | Open |
|------------------+--------------------+--------------------|
| Disabled | Open | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | JB2/G | JB2/H | JB2/I | JB2/J |
|---------------+-----------+----------+----------+----------|
| COM1 (3F8h) | Off | On | Off | On |
|---------------+-----------+----------+----------+----------|
| COM2 (2F8h) | Off | On | On | Off |
|---------------+-----------+----------+----------+----------|
| í COM3 (3E8h) | On | Off | Off | On |
|---------------+-----------+----------+----------+----------|
| COM4 (2E8h) | On | Off | On | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 1 INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | JB2/A | JB2/B | JB2/C | JB2/D | JB2/E | JB2/F |
|---------+--------+--------+--------+-------+-------+-------|
| IRQ3 | On | Off | Off | Off | Off | Off |
|---------+--------+--------+--------+-------+-------+-------|
| IRQ4 | Off | On | Off | Off | Off | Off |
|---------+--------+--------+--------+-------+-------+-------|
| IRQ5 | Off | Off | On | Off | Off | Off |
|---------+--------+--------+--------+-------+-------+-------|
| IRQ7 | Off | Off | Off | On | Off | Off |
|---------+--------+--------+--------+-------+-------+-------|
| í IRQ10 | Off | Off | Off | Off | On | Off |
|---------+--------+--------+--------+-------+-------+-------|
| IRQ11 | Off | Off | Off | Off | Off | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SOUND CARD CONTROL |
|------------------------------------------------------------|
| Setting | JB3/Pins 1 & 2 | JB3/Pins 3 & 4 |
|------------------+--------------------+--------------------|
| í Enabled | Closed | Open |
|------------------+--------------------+--------------------|
| Disabled | Open | Closed |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| AUTO-RELIABLE TIME BUFFER CONFIGURATION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the handling of incoming data |
| | during auto-reliable time period |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \C0 | Data is discarded |
|--------------+---------------------------------------------|
| \C1 | Data is buffered |
|--------------+---------------------------------------------|
| \C2 | Data is discarded; modem returns to normal |
| | mode on receiving auto-reliable fallback |
| | character. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AUTO-RETRAIN - AUTO-FALLBACK/FALL-FORWARD |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %En [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls auto-retrain mode and |
| | fallback/fall-forward |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %E0 | Auto-retrain disabled |
|--------------+---------------------------------------------|
| %E1 | Auto-retrain enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BREAK TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Kn [cmds] |
|--------------+---------------------------------------------|
| Description: | Configures action of break signal |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| \K0 | Online command mode enabled, send no break |
| | to remote modem |
|---------------+--------------------------------------------|
| \K1 | Break sent to remote modem and buffered |
| | cleared |
|---------------+--------------------------------------------|
| \K2 | Online command mode enabled, send no break |
| | to remote modem |
|---------------+--------------------------------------------|
| \K3 | Send break to remote modem immediately |
|---------------+--------------------------------------------|
| \K4 | Online command mode enabled, send no break |
| | to remote modem |
|---------------+--------------------------------------------|
| \K5 | Send break with transmitted data |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BUFFER SIZE - LOWER LIMIT |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S49=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 10 |
|--------------+---------------------------------------------|
| Range: | 0-255 |
|--------------+---------------------------------------------|
| Unit: | 1 byte |
|--------------+---------------------------------------------|
| Description: | Controls the low-end size of the buffer |
| | during error-control mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BUFFER SIZE - UPPER LIMIT |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S50=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 200 |
|--------------+---------------------------------------------|
| Range: | 2-255 |
|--------------+---------------------------------------------|
| Unit: | 1 byte |
|--------------+---------------------------------------------|
| Description: | Controls the high-end size of the buffer |
| | during error-control mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPRESSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects data compression |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %C0 | Data compression disabled |
|--------------+---------------------------------------------|
| %C1 | MNP5 enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECT MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the type of connection the modem |
| | will operate in |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \N0 | Normal mode enabled |
|--------------+---------------------------------------------|
| \N1 | Direct mode enabled |
|--------------+---------------------------------------------|
| \N2 | MNP reliable mode enabled |
|--------------+---------------------------------------------|
| \N3 | Auto-reliable mode enabled |
|--------------+---------------------------------------------|
| \N4 | V.42 reliable mode enabled |
|--------------+---------------------------------------------|
| \N5 | V.42 auto-reliable mode enabled |
|--------------+---------------------------------------------|
| \N6 | Reliable mode enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] D<#> [cmds] |
|--------------+---------------------------------------------|
| Description: | Dials telephone number according to any |
| | modifiers included in the string |
|--------------+---------------------------------------------|
| Note: | Any combination of modifiers can be used to |
| | produce the desired dial functions in |
| | sequence. |
|--------------+---------------------------------------------|
| Modifier | Function |
|--------------+---------------------------------------------|
| L | Re-dial last number |
|--------------+---------------------------------------------|
| P | Pulse dialing enabled |
|--------------+---------------------------------------------|
| Sn | Dial stored telephone number n |
|--------------+---------------------------------------------|
| T | Tone dialing enabled |
|--------------+---------------------------------------------|
| W | Dialing resumed following dial tone |
| | detection for amount of time specified in |
| | S7 register |
|--------------+---------------------------------------------|
| , | Dialing paused for amount of time specified |
| | in S8 register |
|--------------+---------------------------------------------|
| ! | Modem commanded to go off-hook for .5 |
| | second before returning on-hook |
|--------------+---------------------------------------------|
| @ | Wait for quiet answer for amount of time |
| | specified in S7 register |
|--------------+---------------------------------------------|
| ; | Modem returned to command state after |
| | dialing |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DICTIONARY SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Dn [cmds] |
|--------------+---------------------------------------------|
| Description: | Select dictionary size |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| %D0 | Select 1/2K bytes |
|------------------+-----------------------------------------|
| %D1 | Select 1K bytes |
|------------------+-----------------------------------------|
| %D2 | Select 2K bytes |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Vn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects extended result codes |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \V0 | Extended result codes disabled |
|--------------+---------------------------------------------|
| \V1 | Extended result codes enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Gn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects modem port flow control |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \G0 | Flow control disabled |
|--------------+---------------------------------------------|
| \G1 | Flow control enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Qn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets type of flow control used by modem |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \Q0 | Flow control disabled |
|--------------+---------------------------------------------|
| \Q1 | XON/XOFF, bi-directional RTS/CTS flow |
| | control enabled |
|--------------+---------------------------------------------|
| \Q2 | Unidirectional CTS flow control enabled |
|--------------+---------------------------------------------|
| \Q3 | Bi-directional RTS/CTS flow control enabled |
|--------------+---------------------------------------------|
| \Q4 | Unidirectional XON/XOFF flow control by DCE |
| | enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INACTIVITY TIMER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Tn [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0-90 |
|--------------+---------------------------------------------|
| Unit: | 1 minute |
|--------------+---------------------------------------------|
| Description: | Sets the length of time that the modem does |
| | not receive information before it |
| | disconnects. |
|--------------+---------------------------------------------|
| Note: | AT\T0 will disable timer. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REPORT INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information requested |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Reports product code |
|--------------+---------------------------------------------|
| I1 | Reports ROM checksum |
|--------------+---------------------------------------------|
| I2 | Tests and reports ROM checksum |
|--------------+---------------------------------------------|
| I3 | Reports firmware revision |
|--------------+---------------------------------------------|
| I4 | Reports current configuration |
+------------------------------------------------------------+
+------------------------------------------------------------+
| XON/XOFF PASS-THROUGH |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Xn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether XON/XOFF signals are sent |
| | to remote modem |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \X0 | XON/XOFF signals trapped by local modem |
|--------------+---------------------------------------------|
| \X1 | XON/XOFF passed through local modem |
+------------------------------------------------------------+