(TXT) View Source
# PURE DATA, LTD.
SATISFAXTION MODEM/200
Card Type Modem(asynchronous)
Chip Set Intel
Maximum Data Rate 2400bps
Maximum Fax Rate 9600bps
Data Bus 16 bit ISA
Fax Class Class I & II
Data Modulation Protocol Bell 103A/212A
ITU-T V.21, V.22, V.22bis
Fax Modulation Protocol Unidentified
Error Correction/Compression MNP5, V.42, V.42bis
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| Line in | CN1 | Unidentified | CN3 |
|---------------------------+----------+--------------+------|
| Line out | CN2 | | |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| ACCEPT RELIABLE CONNECTION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \U [cmds] |
|--------------+---------------------------------------------|
| Description: | Accepts remote modem’s request for MNP |
| | reliable link. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AUTO-RELIABLE FALLBACK CHARACTER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %An [cmds] |
|--------------+---------------------------------------------|
| Default: | 19 |
|--------------+---------------------------------------------|
| Range: | 0-127 |
|--------------+---------------------------------------------|
| Unit: | ASCII |
|--------------+---------------------------------------------|
| Description: | Sets the character used as the |
| | auto-reliable fallback character |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AUTO-RELIABLE TIME BUFFER CONFIGURATION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the handling of incoming data |
| | during auto-reliable time period |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í \CO | Disabled |
|--------------+---------------------------------------------|
| \C1 | Enable 200 character buffer. If 200 |
| | characters received without reliable |
| | character, establish normal connection |
|--------------+---------------------------------------------|
| \C2 | Auto reliable buffer disabled. Establish |
| | normal connection on receipt of escape |
| | character |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S14 |
|------------------------------------------------------------|
| Format | AT [cmds] S14=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 138 |
|--------------+---------------------------------------------|
| Range: | 0-174 |
|--------------+---------------------------------------------|
| Unit: | Bit-mapped |
|--------------+---------------------------------------------|
| Description: | Controls echo, result codes, result code |
| | display, dial mode, and answer/originate |
| | mode |
|--------------+---------------------------------------------|
| Bit | Value | Function |
|------+-------+---------------------------------------------|
| 0 | 0 | Not used |
|------+-------+---------------------------------------------|
| 1 | 0 | Command echo disabled |
| | | |
| | í 1 | Command echo enabled |
|------+-------+---------------------------------------------|
| 2 | í 0 | Result codes enabled |
| | | |
| | 1 | Result codes disabled |
|------+-------+---------------------------------------------|
| 3 | 0 | Display result codes in numeric format |
| | | |
| | í 1 | Display result codes in verbose format |
|------+-------+---------------------------------------------|
| 4 | 0 | Not used |
|------+-------+---------------------------------------------|
| 5 | í 0 | Tone dial enabled |
| | | |
| | 1 | Pulse dial enabled |
|------+-------+---------------------------------------------|
| 6 | 0 | Not used |
|------+-------+---------------------------------------------|
| 7 | 0 | Answer mode enabled |
| | | |
| | í 1 | Originate mode enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S21 |
|------------------------------------------------------------|
| Format | AT [cmds] S21=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 48 |
|--------------+---------------------------------------------|
| Range: | 0 - 254 |
|--------------+---------------------------------------------|
| Unit: | Bit-mapped |
|--------------+---------------------------------------------|
| Description: | Controls S23, CTS action, DTR action, DCD |
| | action, DSR action and the Long Space |
| | Disconnect function. |
|--------------+---------------------------------------------|
| Bit | Value | Function |
|------+-------+---------------------------------------------|
| 0 | 0 | Not used |
|------+-------+---------------------------------------------|
| 1 | 0 | Option 1 for bits 1, 2 and 3 of S32 enabled |
| | | |
| | 1 | Option 2 for bits 1, 2 and 3 of S23 enabled |
|------+-------+---------------------------------------------|
| 2 | í 0 | CTS signal normal |
| | | |
| | 1 | CTS signal forced high |
|------+-------+---------------------------------------------|
| 4, 3 | 00 | DTR signal ignored |
| | | |
| | 01 | Modem goes to command mode on low DTR |
| | | |
| | í 10 | Modem disconnects on low DTR. Auto-Answer |
| | | is disabled |
| | 11 | |
| | | Modem is initialized on low DTR |
|------+-------+---------------------------------------------|
| 5 | 0 | DCD signal forced high |
| | | |
| | í 1 | DCD signal normal |
|------+-------+---------------------------------------------|
| 6 | í 0 | DSR signal forced high |
| | | |
| | 1 | DSR signal normal |
|------+-------+---------------------------------------------|
| 7 | í 0 | Long Space Disconnect function disabled |
| | | |
| | 1 | Long Space Disconnect function enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S22 |
|------------------------------------------------------------|
| Format | AT [cmds] S22=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 118 |
|--------------+---------------------------------------------|
| Range: | 0-255 |
|--------------+---------------------------------------------|
| Unit: | Bit-mapped |
|--------------+---------------------------------------------|
| Description: | Controls speaker, result codes and |
| | make/break ratio |
|--------------+---------------------------------------------|
| Bit | Value | Function |
|------+-------+---------------------------------------------|
| 1, 0 | 00 | Off volume |
| | | |
| | 01 | On volume |
| | | |
| | í 10 | Medium level volume |
| | | |
| | 11 | High level volume |
|------+-------+---------------------------------------------|
| 3, 2 | 00 | Speaker off |
| | | |
| | í 01 | Speaker off on carrier |
| | | |
| | 10 | Speaker always on |
| | | |
| | 11 | Speaker on during handshake |
|------+-------+---------------------------------------------|
| 6, | 000 | Blind dial and basic result codes only |
| 5, 4 | | enabled |
| | 100 | |
| | | Blind dial and basic and connection speed |
| | 101 | result codes enabled |
| | | |
| | 110 | Blind dial and basic and connection speed |
| | | result codes and dialtone detection enabled |
| | í 111 | |
| | | Blind dial, basic and connection speed |
| | | result codes and dialtone detection enabled |
| | | |
| | | Blind dial, basic and connection speed |
| | | result codes, busy and dialtone detection |
| | | enabled |
|------+-------+---------------------------------------------|
| 7 | í 0 | Make/Break pulse ratio at 39/61 |
| | | |
| | 1 | Make/Break pulse ration at 33/67 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S23 |
|------------------------------------------------------------|
| Format | AT [cmds] S23=n [cmds] |
|--------------+---------------------------------------------|
| Default: | Unidentified |
|--------------+---------------------------------------------|
| Range: | 0-191 |
|--------------+---------------------------------------------|
| Unit: | Bit-mapped |
|--------------+---------------------------------------------|
| Description: | Grants/denies remote digital loopback, |
| | controls DTE rate and parity, and sets |
| | guard tone |
|------------------------------------------------------------|
| Note: See S21 bit one to set option 1 and 2 |
|------------------------------------------------------------|
| Bit | Value | Function |
|------+-------+---------------------------------------------|
| 0 | 0 | Remote digital loopback ignored |
| | | |
| | í 1 | Remote digital loopback accepted |
|------------------------------------------------------------|
| Option 1 (bit 1 of S21 = 0) |
|------------------------------------------------------------|
| 3, | 000 | Sets serial port speed to 0-300bps |
| 2, 1 | | |
| | 001 | Sets serial port speed to 1200bps |
| | | |
| | 010 | Sets serial port speed to 2400bps |
| | | |
| | 011 | Sets serial port speed to 4800bps |
| | | |
| | 101 | Sets serial port speed to 9600bps |
| | | |
| | 110 | Sets serial port speed to 19.2Kbps |
| | | |
| | 111 | Sets serial port speed to 38.4Kbps |
|------------------------------------------------------------|
| Option 2 (bit 1 of S21 = 1) |
|------------------------------------------------------------|
| 3, | 000 | Sets serial port speed to 12.0Kbps |
| 2, 1 | | |
| | 001 | Sets serial port speed to 14.4Kbps |
| | | |
| | 010 | Sets serial port speed to 57.6Kbps |
|------+-------+---------------------------------------------|
| 5,4 | 00 | Parity even |
| | | |
| | í 01 | Parity space/no parity |
| | | |
| | 10 | Parity odd |
| | | |
| | 11 | Parity mark |
|------+-------+---------------------------------------------|
| 7, 6 | 00 | Guard tone disabled |
| | | |
| | 01 | 550Hz guard tone enabled |
| | | |
| | í 10 | 1800Hz guard tone enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S27 |
|------------------------------------------------------------|
| Format | AT [cmds] S27=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 73 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | Bit-mapped |
|--------------+---------------------------------------------|
| Description: | Controls communications mode, line type, |
| | and protocol type |
|--------------+---------------------------------------------|
| Bit | Value | Function |
|------+-------+---------------------------------------------|
| 0 | 0 | Not used |
|------+-------+---------------------------------------------|
| 1 | 0 | Not used |
|------+-------+---------------------------------------------|
| 7, 2 | í00 | Switched line |
| | | |
| | 01 | Leased line |
| | | |
| | 10 | Not used |
| | | |
| | 11 | Leased line |
|------+-------+---------------------------------------------|
| 3 | 0 | Not used |
|------+-------+---------------------------------------------|
| 4 | 0 | Not used |
|------+-------+---------------------------------------------|
| 5 | 0 | Not used |
|------+-------+---------------------------------------------|
| 6 | í 0 | Select CCITT protocols |
| | | |
| | 1 | Select Bell protocols |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BREAK SEND |
|------------------------------------------------------------|
| Type | Configuration |
|-------------+----------------------------------------------|
| Format | AT [cmds] \Bn [cmds] |
|-------------+----------------------------------------------|
| Default | 3 |
|-------------+----------------------------------------------|
| Range | 1 -9 |
|-------------+----------------------------------------------|
| Unit | .1 second |
|-------------+----------------------------------------------|
| Description | Sends break of n |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BREAK TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|---------------------+--------------------------------------|
| Format: | AT [cmds] \Kn [cmds] |
|---------------------+--------------------------------------|
| Description: | Configures action of break signal |
|------------------------------------------------------------|
| Command | Break from | Break from DTE | Break from |
| | DTE | while in | remote modem |
| | | command mode | |
|------------+-------------+-----------------+---------------|
| \K0 | Enter | Buffers cleared | Buffers |
| | command | and break sent | cleared and |
| | mode, do | to remote modem | break sent to |
| | not send | | remote modem |
| | break to | | |
| | remote | | |
| | modem | | |
|------------+-------------+-----------------+---------------|
| \K1 | Buffers | Buffers cleared | Buffers |
| | cleared and | and break sent | cleared and |
| | break sent | to remote modem | break sent to |
| | to remote | | remote modem |
| | modem | | |
|------------+-------------+-----------------+---------------|
| \K2 | Enter | Send break to | Send break to |
| | command | remote modem | remote modem |
| | mode, do | immediately | immediately |
| | not send | | |
| | break to | | |
| | remote | | |
| | modem | | |
|------------+-------------+-----------------+---------------|
| \K3 | Send break | Send break to | Send break to |
| | to remote | remote modem | remote modem |
| | modem | immediately | immediately |
| | immediately | | |
|------------+-------------+-----------------+---------------|
| \K4 | Enter | Send break to | Send break to |
| | command | remote modem | remote modem |
| | mode, do | with | with |
| | not send | transmitted | transmitted |
| | break to | data | data |
| | remote | | |
| | modem | | |
|------------+-------------+-----------------+---------------|
| í \K5 | Send break | Send break to | Send break to |
| | with | remote modem | remote modem |
| | transmitted | with | with |
| | data | transmitted | transmitted |
| | | data | data |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPRESSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT %Cn |
|--------------+---------------------------------------------|
| Description: | Selects MNP5 data compression |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %C0 | Data compression disabled |
|--------------+---------------------------------------------|
| í %C1 | Data compression enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECT MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets connect mode |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \N0 | Normal mode enabled |
|--------------+---------------------------------------------|
| \N2 | MNP mode enabled |
|--------------+---------------------------------------------|
| \N3 | LAPM mode enabled |
|--------------+---------------------------------------------|
| í \N4 | LAPM mode enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Gn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects modem port flow control |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í \G0 | Flow control disabled |
|--------------+---------------------------------------------|
| \G1 | Flow control enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Qn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets type of flow control used by modem |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \Q0 | Flow control disabled |
|--------------+---------------------------------------------|
| \Q1 | Bidirectional XON/XOFF flow control enabled |
|--------------+---------------------------------------------|
| \Q2 | CTS flow control by DCE enabled |
|--------------+---------------------------------------------|
| í \Q3 | Bidirectional CTS/RTS flow control enabled |
|--------------+---------------------------------------------|
| \Q4 | XON/XOFF flow control by DCE enabled |
|--------------+---------------------------------------------|
| \Q5 | CTS flow control by DCE enabled. CTS low |
| | until connection established |
|--------------+---------------------------------------------|
| \Q6 | Bidirectional CTS/RTS flow control enabled. |
| | CTS low until connection established |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INACTIVITY TIMER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Tn [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0-90 |
|--------------+---------------------------------------------|
| Unit: | 1 minute |
|--------------+---------------------------------------------|
| Description: | Sets the length of time that the modem does |
| | not receive information before it |
| | disconnects |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOCK SERIAL PORT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Jn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets operation of serial port speed |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í \J0 | Serial speed locked |
|--------------+---------------------------------------------|
| \J1 | Serial speed follows connect speed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOOPBACK TESTS |
|------------------------------------------------------------|
| Format | AT [cmds] S16=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 125 |
|--------------+---------------------------------------------|
| Unit: | Bit-mapped |
|--------------+---------------------------------------------|
| Description: | Enables loopback tests |
|--------------+---------------------------------------------|
| Bit | Value | Function |
|------+-------+---------------------------------------------|
| 0 | í 0 | Local analog loopback test disabled |
| | | |
| | 1 | Local analog loopback test enabled |
|------+-------+---------------------------------------------|
| 1 | 0 | Not used |
|------+-------+---------------------------------------------|
| 2 | í 0 | Local digital loopback test disabled |
| | | |
| | 1 | Local digital loopback test enabled |
|------+-------+---------------------------------------------|
| 3 | í 0 | Modem is not performing remotely requested |
| | | remote digital loopback test |
| | 1 | |
| | | Modem is performing remotely requested |
| | | remote digital loopback test |
|------+-------+---------------------------------------------|
| 4 | í 0 | Modem is not performing locally requested |
| | | remote digital loopback test |
| | 1 | |
| | | Modem is performing locally requested |
| | | remote digital loopback test |
|------+-------+---------------------------------------------|
| 5 | í 0 | Remote digital loopback with local |
| | | self-test disabled |
| | 1 | |
| | | Remote digital loopback with local |
| | | self-test enabled |
|------+-------+---------------------------------------------|
| 6 | í 0 | Local analog loopback with local self-test |
| | | disabled |
| | 1 | |
| | | Local analog loopback with local self-test |
| | | enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MAXIMUM BLOCK SIZE FOR TRANSMISSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \An [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the maximum transmittable block size |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \A0 | MNP block size is 64 characters |
|--------------+---------------------------------------------|
| \A1 | MNP block size is 128 characters |
|--------------+---------------------------------------------|
| \A2 | MNP block size is 192 characters |
|--------------+---------------------------------------------|
| í \A3 | MNP block size is 256 characters |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MNP STREAM/BLOCK MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Ln [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the transfer mode for MNP |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í \L0 | Stream mode for MNP enabled |
|--------------+---------------------------------------------|
| \L1 | Block mode for MNP enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESULT CODE FORMAT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Vn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects format for information-text and |
| | result codes |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| V0 | Numeric format enabled |
|--------------+---------------------------------------------|
| V1 | Verbose (word) format enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SWITCH TO NORMAL MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Z [cmds] |
|--------------+---------------------------------------------|
| Description: | Switches to normal mode from MNP mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TEST TIME LIMIT |
|------------------------------------------------------------|
| Type | Configuration |
|-------------+----------------------------------------------|
| Format | AT [cmds] S18=n [cmds] |
|-------------+----------------------------------------------|
| Default | 0 |
|-------------+----------------------------------------------|
| Range | 0 - 255 |
|-------------+----------------------------------------------|
| Unit | 1 second |
|-------------+----------------------------------------------|
| Description | Limits time allowed for diagnostic test |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.42 DETECTION PHASE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] -Jn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls V.42 detection |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| -J0 | V.42 detection disabled |
|--------------+---------------------------------------------|
| í -J1 | V.42 detection enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.42bis COMPRESSION CONTROL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] "Hn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls V.42bis data compression |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| "H0 | V.42bis disabled |
|--------------+---------------------------------------------|
| "H1 | V.42bis when transmitting enabled |
|--------------+---------------------------------------------|
| "H2 | V.42bis when receiving enabled |
|--------------+---------------------------------------------|
| í "H3 | V.42bis when transmitting/receiving enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.42bis MAXIMUM STRING LENGTH |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] "O=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 250 |
|--------------+---------------------------------------------|
| Range: | 6 -250 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Selects string size for V.42bis compression |
+------------------------------------------------------------+
+------------------------------------------------------------+
| XON/XOFF PASS-THROUGH |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Xn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether XON/XOFF signals are sent |
| | to remote modem |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í \X0 | XON/XOFF signals trapped by local modem |
|--------------+---------------------------------------------|
| \X1 | XON/XOFF passed through local modem |
+------------------------------------------------------------+