(TXT) View Source
# MOTOROLA, INC.
FT100 M
Card Type T1 CSU/DSU, Ethernet
Chip Set Unidentified
I/O Options Monitor ports, alarm port
Network Transfer Rate 10Mbps
Topology Star
Wiring Type Unshielded twisted pair
Transfer Rate 1.544Mbps
Data Bus Serial
Protocol AMI, B8ZS
Frame Type SF, ESF
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| Monitor receive | CN1 | Serial control port | CN6 |
|----------------------+-------+---------------------+-------|
| Monitor transmit | CN2 | DSX-1, RS-232, | CN7 |
| | | RS-449, RS-530, or | |
| | | V.35 serial data | |
| | | port 2 (on | |
| | | daughterboard) | |
|----------------------+-------+---------------------+-------|
| T1 interface | CN3 | DC power in | CN8 |
|----------------------+-------+---------------------+-------|
| UTP connector | CN4 | Alarm port (see | SC1 |
| | | pinout below) | |
|----------------------+-------+---------------------+-------|
| DSX-1, RS-232, | CN5 | | |
| RS-449, RS-530, or | | | |
| V.35 serial data | | | |
| port 1 (on | | | |
| daughterboard) | | | |
|------------------------------------------------------------|
| Note:Standard serial ports are provided on included |
| adapter cables. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SC1 PINOUT |
|------------------------------------------------------------|
| Function | Pin | Function | Pin |
|----------------------------+------+-----------------+------|
| Normally closed connection | 1 | Signal common | 3 |
|----------------------------+------+-----------------+------|
| Normally open connection | 2 | Not used | 4 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| » | Signal ground connected to | E1 | Pins 2 & 3 |
| | chassis ground | | closed |
|---+---------------------------------+-------+--------------|
| | Signal ground not connected to | E1 | Pins 1 & 2 |
| | chassis ground | | closed |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/1 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/3 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/4 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/5 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/6 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/7 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S1/8 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/1 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/3 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/4 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/5 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/6 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/7 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S2/8 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/1 | On |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/2 | On |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/3 | On |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/4 | On |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/5 | On |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/6 | On |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/7 | On |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | S28/8 | Off |
| | alter | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS (CON’T) |
|------------------------------------------------------------|
| Setting | Label | Position |
|----------------------------------------+-------+-----------|
| » | One stop bit selected | S29/5 | On |
|---+------------------------------------+-------+-----------|
| | Two stop bits selected | S29/5 | Off |
|---+------------------------------------+-------+-----------|
| » | 8 data bits selected | S29/6 | On |
|---+------------------------------------+-------+-----------|
| | 7 data bits selected | S29/6 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONTROL PORT CONFIGURATION |
|------------------------------------------------------------|
| Setting | E25 | E26 | E27 |
|---------+------------------+---------------+---------------|
| » | DCE | Pins 1 & 2, 3 & | Pins 1 & 2, 3 | Pins 1 & 2, 3 |
| | | 4 closed | & 4 closed | & 4 closed |
|---+-----+------------------+---------------+---------------|
| | DTE | Pins 1 & 3, 2 & | Pins 1 & 3, 2 | Pins 1 & 3, 2 |
| | | 4 closed | & 4 closed | & 4 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT SPEED SELECTION |
|------------------------------------------------------------|
| Setting | S29/1 | S29/2 |
|------------------------+-----------------+-----------------|
| | 2400bps | Off | Off |
|---+--------------------+-----------------+-----------------|
| | 4800bps | Off | On |
|---+--------------------+-----------------+-----------------|
| | 9600bps | On | Off |
|---+--------------------+-----------------+-----------------|
| » | 19.2Kbps | On | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA PARITY SELECTION |
|------------------------------------------------------------|
| Setting | S29/3 | S29/4 |
|------------------------+-----------------+-----------------|
| » | Disabled | On | N/A |
|---+--------------------+-----------------+-----------------|
| | Even | Off | On |
|---+--------------------+-----------------+-----------------|
| | Odd | Off | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL SELECTION |
|------------------------------------------------------------|
| Setting | S29/7 | S29/8 |
|-----------------------------------+------------+-----------|
| » | Flow control disabled | On | On |
|---+-------------------------------+------------+-----------|
| | XON/XOFF flow control enabled | On | Off |
|---+-------------------------------+------------+-----------|
| | RTS/CTS flow control enabled | Off | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+-------+--------+------------------------------------|
| TXD2 | Green | On | Data is being transmitted to port |
| | | | 2 |
|------+-------+--------+------------------------------------|
| TXD2 | Green | Off | Data is not being transmitted to |
| | | | port 2 |
|------+-------+--------+------------------------------------|
| RXD2 | Green | On | Data is being received from port 2 |
|------+-------+--------+------------------------------------|
| RXD2 | Green | Off | Data is not being received from |
| | | | port 2 |
|------+-------+--------+------------------------------------|
| TXD1 | Green | On | Data is being transmitted to port |
| | | | 1 |
|------+-------+--------+------------------------------------|
| TXD1 | Green | Off | Data is not being transmitted to |
| | | | port 1 |
|------+-------+--------+------------------------------------|
| RXD1 | Green | On | Data is being received from port 1 |
|------+-------+--------+------------------------------------|
| RXD1 | Green | Off | Data is not being received from |
| | | | port 1 |
|------+-------+--------+------------------------------------|
| YEL | Red | On | Yellow alarm condition detected |
|------+-------+--------+------------------------------------|
| YEL | Red | Off | Yellow alarm condition not |
| | | | detected |
|------+-------+--------+------------------------------------|
| AIS | Red | On | All Ones Signal detected |
|------+-------+--------+------------------------------------|
| AIS | Red | Off | All Ones Signal not detected |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) (CON’T) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-----+-------+--------+-------------------------------------|
| LOS | Red | On | Loss of signal detected |
|-----+-------+--------+-------------------------------------|
| LOS | Red | Off | Loss of signal not detected |
|-----+-------+--------+-------------------------------------|
| SYN | Green | On | Valid framing pattern received from |
| | | | T1 interface |
|-----+-------+--------+-------------------------------------|
| SYN | Green | Off | Valid framing pattern not received |
| | | | from T1 interface |
|-----+-------+--------+-------------------------------------|
| PWR | Green | On | Power is on |
|-----+-------+--------+-------------------------------------|
| PWR | Green | Off | Power is off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|----------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW1 | Off |
|---+------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW2 | Off |
|---+------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW3 | On |
|---+------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW4 | On |
|---+------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW5 | Off |
|---+------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW6 | On |
|---+------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW7 | Off |
|---+------------------------------------+-------+-----------|
| » | Factory configured - do not alter | SW8 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| Diagram not available. |
+------------------------------------------------------------+
FT100 M (RS-449/530 INTERFACE)
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| Diagram not available. |
| |
| The card's jumper(s) must be set for Test Mode |
| operation. |
+------------------------------------------------------------+