(TXT) View Source
       
       # MOTOROLA, INC.
       
          BITSURFR PRO ISA
       
          Card Type         ISDN TA                                      
          Chip Set          Unidentified                                 
          I/O Options       Analog adapters (2)                          
          Transfer Rate     56Kbps x 2/64Kbps x 2                        
          Data Bus          16-bit ISA                                   
          ISDN Protocol     AIMux, PPP, V.120                            
          Switch Type       5ESS, DMS-100, NI-1                          
          Card Size         Full-height, unidentified length             
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |       Function       | Label |      Function       | Label |
          |----------------------+-------+---------------------+-------|
          | ISDN U interface     |  CN1  | Analog adapter 2    |  CN3  |
          |----------------------+-------+---------------------+-------|
          | Analog adapter 1     |  CN2  |                     |       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                SUPPORTED STANDARD COMMANDS                 |
          |------------------------------------------------------------|
          |                     Basic AT Commands                      |
          |------------------------------------------------------------|
          | +++, A/                                                    |
          |------------------------------------------------------------|
          | A, E, H, O, V, W, X, Z                                     |
          |------------------------------------------------------------|
          | &F, &S, &W, &Y, &Z                                         |
          |------------------------------------------------------------|
          |                    Extended AT Commands                    |
          |------------------------------------------------------------|
          | \Q                                                         |
          |------------------------------------------------------------|
          |                        S-Registers                         |
          |------------------------------------------------------------|
          | S0, S1, S2, S3, S4, S5, S7, S10, S12, S18, S25             |
          |------------------------------------------------------------|
          |      Note:See MHI help file for complete information.      |
          +------------------------------------------------------------+
       
          Proprietary AT Command Set
       
          +------------------------------------------------------------+
          |                  AUTHENTICATION PROTOCOL                   |
          |------------------------------------------------------------|
          | Type:            | Configuration                           |
          |------------------+-----------------------------------------|
          |   | Format:      | AT [cmds] @M2= x [cmds]                 |
          |---+--------------+-----------------------------------------|
          |   | Description: | Selects whether the TA will use an      |
          |   |              | authentication protocol.                |
          |---+--------------+-----------------------------------------|
          |   |   Command    |                Function                 |
          |---+--------------+-----------------------------------------|
          | » |    @M2=N     | TA will not use authentication          |
          |   |              | protocol.                               |
          |---+--------------+-----------------------------------------|
          |   |    @M2=P     | TA will use PAP authentication          |
          |   |              | protocol.                               |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                        COMMAND SET                         |
          |------------------------------------------------------------|
          | Type:            | Configuration                           |
          |------------------+-----------------------------------------|
          |   | Format:      | AT [cmds] @P1= n [cmds]                 |
          |---+--------------+-----------------------------------------|
          |   | Description: | Selects whether the TA will use the AT  |
          |   |              | command set.                            |
          |---+--------------+-----------------------------------------|
          |   |   Command    |                Function                 |
          |---+--------------+-----------------------------------------|
          | » |    @P1=A     | AT command set enabled.                 |
          |---+--------------+-----------------------------------------|
          |   |    @P1=N     | Command set disabled                    |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                       COMMAND TARGET                       |
          |------------------------------------------------------------|
          | Type:            | Immediate                               |
          |------------------+-----------------------------------------|
          |   | Format:      | AT [cmds] >C n [cmds]                   |
          |---+--------------+-----------------------------------------|
          |   | Description: | Selects which I/O interface the issued  |
          |   |              | commands will target.                   |
          |---+--------------+-----------------------------------------|
          |   |   Command    |                Function                 |
          |---+--------------+-----------------------------------------|
          | » |     >C0      | Issued commands will affect the COM     |
          |   |              | port interface.                         |
          |---+--------------+-----------------------------------------|
          |   |     >C1      | Issued commands will affect programmed  |
          |   |              | I/O port 1.                             |
          |---+--------------+-----------------------------------------|
          |   |     >C2      | Issued commands will affect programmed  |
          |   |              | I/O port 2.                             |
          |---+--------------+-----------------------------------------|
          |   |     >C3      | Issued commands will affect programmed  |
          |   |              | I/O port 3.                             |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DTR DIALING DELAY                      |
          |------------------------------------------------------------|
          | Type:        | Configuration                               |
          |--------------+---------------------------------------------|
          | Format:      | AT [cmds] &L2= n [cmds]                     |
          |--------------+---------------------------------------------|
          | Default:     | 8                                           |
          |--------------+---------------------------------------------|
          | Range:       | 1 - 255                                     |
          |--------------+---------------------------------------------|
          | Unit:        | 1 second                                    |
          |--------------+---------------------------------------------|
          | Description: | Sets the amount of time the TA will wait    |
          |              | between DTR dialing attempts.               |
          +------------------------------------------------------------+
       
          See document MOTOROLA, INC. BITSURFR PRO EZ for a full command
          summary.