(TXT) View Source
# MOTOROLA, INC.
3261/3266
Modem Type Data (synchronous/asynchronous)
Maximum Data Rate 14.4Kbps
Data Bus External
Data Modulation Bell 103A/212A
Protocol
ITU-T V.21, V.22, V.22bis, V.32,
V.32bis
Error MNP5, V.42, V.42bis
Correction/Compression
Motorola Codex
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|-------------------+----------+------------------+----------|
| RETURN button | BT1 | Leased line out | CN3 |
|-------------------+----------+------------------+----------|
| DOWN button | BT2 | 120VAC power | CN4 |
|-------------------+----------+------------------+----------|
| ACROSS button | BT3 | RS-232/422 | CN5 |
|-------------------+----------+------------------+----------|
| ENTER button | BT4 | Network control | CN6 |
| (Talk/Data) | | out | |
|-------------------+----------+------------------+----------|
| Switched line out | CN1 | Network control | CN7 |
| | | in | |
|-------------------+----------+------------------+----------|
| Line in | CN2 | Power switch | SW1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ELECTRICAL INTERFACE SELECTION |
|------------------------------------------------------------|
| Interface | SW2/1 |
|-------------------------------+----------------------------|
| » EIA/TIA 232-D | On |
|-------------------------------+----------------------------|
| ITU-T V.35 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TEST/BUSY OUT ON PIN 25 |
|------------------------------------------------------------|
| Mode | SW2/2 |
|----------------------------------------------+-------------|
| » Enable busy out when pin 25 is high | Off |
|----------------------------------------------+-------------|
| Self test is in progress when pin 25 is high | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FRONT PANEL CONFIGURATION |
|------------------------------------------------------------|
| Mode | SW2/3 |
|-------------------------------+----------------------------|
| » Front panel enabled | Off |
|-------------------------------+----------------------------|
| Front panel disabled | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESET MEMORY |
|------------------------------------------------------------|
| Mode | SW2/4 |
|---------------------------------+--------------------------|
| » Normal operation | Off |
|---------------------------------+--------------------------|
| Reset modem to factory settings | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMMAND SETS |
|------------------------------------------------------------|
| Mode | SW2/5 |
|-------------------------------+----------------------------|
| » Command sets enabled | Off |
|-------------------------------+----------------------------|
| Command sets disabled | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FACTORY CONFIGURED - DO NOT ALTER |
|------------------------------------------------------------|
| Switch | Position |
|-----------------------------+------------------------------|
| SW2/6 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-------+-------+--------+-----------------------------------|
| RD | Red | On | Modem is receiving data |
|-------+-------+--------+-----------------------------------|
| RD | Red | Off | Modem is not receiving data |
|-------+-------+--------+-----------------------------------|
| TR | Red | On | DTR signal is high |
|-------+-------+--------+-----------------------------------|
| TR | Red | Off | DTR signal is low |
|-------+-------+--------+-----------------------------------|
| RI/OH | Red | On | Switched line is off-hook or is |
| | | | ringing |
|-------+-------+--------+-----------------------------------|
| RI/OH | Red | Off | Switched line is on-hook and is |
| | | | not ringing |
|-------+-------+--------+-----------------------------------|
| TD | Red | On | Modem is transmitting data |
|-------+-------+--------+-----------------------------------|
| TD | Red | Off | Modem is not transmitting data |
|-------+-------+--------+-----------------------------------|
| CD | Red | On | Carrier signal detected |
|-------+-------+--------+-----------------------------------|
| CD | Red | Off | Carrier signal not detected |
|-------+-------+--------+-----------------------------------|
| RC/NC | Red | On | Modem is under remote or network |
| | | | control |
|-------+-------+--------+-----------------------------------|
| RC/NC | Red | Off | Modem is under local control |
+------------------------------------------------------------+
Proprietary AT Command Set
See document V1280 for a full command summary.