(TXT) View Source
# DIGICOM SPA
TINTORETTO LAN
Card Type ISDN LAN
Chip Set Unidentified
I/O Options Power, RJ-45 connectors (4)
ISDN Rate 128Kbps
Maximum Fax Rate 14.4Kbps
ISDN Modulation Protocol V.110, V.120, PPP, MLPPP
Error Correction/Compression V.42bis
Fax Class Class I
Data Bus External
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| DC power | CN1 | HUB LAN | CN4 |
| | | port | |
| | | (RJ-45 | |
| | | connector) | |
|-------------------------------+---------+------------+-----|
| Configuration port (RJ-45 | CN2 | ISDN | CN5 |
| connector) | | interface | |
| | | (RJ-45 | |
| | | connector) | |
|-------------------------------+---------+------------+-----|
| PC LAN port (RJ-45 connector) | CN3 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-----+--------+----------+----------------------------------|
| PWR | Green | On | Power is on and diagnostic test |
| | | | has been passed |
|-----+--------+----------+----------------------------------|
| PWR | Green | Blinking | Power is on. Device is in BOOT |
| | | | mode and is flashing EPROM |
|-----+--------+----------+----------------------------------|
| PWR | Red | On | Power is on. Device failed |
| | | | diagnostic test |
|-----+--------+----------+----------------------------------|
| PWR | Yellow | On | Device is loading firmware in |
| | | | RAM |
|-----+--------+----------+----------------------------------|
| PWR | Yellow | Blinking | Device is in BOOT mode |
|-----+--------+----------+----------------------------------|
| PWR | N/A | Off | Power is off |
|-----+--------+----------+----------------------------------|
| LAN | Green | On | LAN is connected and forwarding |
|-----+--------+----------+----------------------------------|
| LAN | Red | On | LAN connection is broken |
|-----+--------+----------+----------------------------------|
| LAN | Yellow | On | LAN is connected but not |
| | | | forwarding. |
|-----+--------+----------+----------------------------------|
| B1 | Green | On | ISDN B1 channel is active; in |
| | | | data mode |
|-----+--------+----------+----------------------------------|
| B1 | Yellow | On | ISDN B1 channel is active, but |
| | | | not compressing data |
|-----+--------+----------+----------------------------------|
| B1 | Red | On | ISDN B1 channel connection is |
| | | | being established |
|-----+--------+----------+----------------------------------|
| B1 | N/A | Off | ISDN B1 channel is inactive |
|-----+--------+----------+----------------------------------|
| B2 | Green | On | ISDN B2 channel is active; in |
| | | | data mode |
|-----+--------+----------+----------------------------------|
| B2 | Yellow | On | ISDN B2 channel is active, but |
| | | | not compressing data |
|-----+--------+----------+----------------------------------|
| B2 | Red | On | ISDN B2 channel connection is |
| | | | being established |
|-----+--------+----------+----------------------------------|
| B2 | N/A | Off | ISDN B2 channel is inactive |
+------------------------------------------------------------+
+---------------------------------------------------------+
| SUPPORTED COMMAND SET |
|---------------------------------------------------------|
| Basic AT Commands |
|---------------------------------------------------------|
| AT, A/ |
|---------------------------------------------------------|
| E, Q, V, W |
|---------------------------------------------------------|
| &C, &R, &Z |
|---------------------------------------------------------|
| S Registers |
|---------------------------------------------------------|
| S3, S4, S12, S25, S26 |
|---------------------------------------------------------|
| |
|---------------------------------------------------------|
| Note: See MHI Help File for full command documentation. |
+---------------------------------------------------------+
PROPRIETARY AT COMMAND SET
For a full command summary, see DIGICOM SPA TINTORETTO EXTERNAL