(TXT) View Source
# DIGICOM SYSTEMS
SCOUT PLUS (INTERNAL)
Card Type Modem, Fax
Chip Set Unidentified
I/O Options Line in (RJ-11), line out (RJ11)
Maximum Modem Rate 14.4Kbps
Maximum Fax Rate 9600bps
Data Modulation Bell 212A, ITU-T V.22, V.22bis, V.32,
Protocol V.32bis
Fax Modulation V.27ter, V.29
Protocol
Error MNP5, V.42, V42bis
Correction/Compression
Fax Class Class I & II
Data Bus 8-bit ISA
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| RJ-11 line | CN1 | RJ-11 line | CN2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|----------------------------------------+-------+-----------|
| Normal operation enabled | SW1/1 | On |
|----------------------------------------+-------+-----------|
| Modem reset | SW1/1 | Off |
|----------------------------------------+-------+-----------|
| í Factory configured - do not alter | SW1/2 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT ADDRESS |
|------------------------------------------------------------|
| Setting | SW1/3 | SW1/4 |
|--------------------+-------------------+-------------------|
| COM1 (3F8h) | Off | Off |
|--------------------+-------------------+-------------------|
| COM2 (2F8h) | On | Off |
|--------------------+-------------------+-------------------|
| COM3 (3E8h) | Off | On |
|--------------------+-------------------+-------------------|
| COM4 (2E8h) | On | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SUPPORTED COMMAND SET |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| AT, A/, +++ |
|------------------------------------------------------------|
| A, E, H, M, 0, V, Z |
|------------------------------------------------------------|
| &F, &T, &Z |
|------------------------------------------------------------|
| |
|------------------------------------------------------------|
| S Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S18, S25, S26 |
|------------------------------------------------------------|
| |
|------------------------------------------------------------|
| Note: See MHI Help file for full command documentation. |
+------------------------------------------------------------+
PROPRIETARY AT COMMAND SET
For a full command summary see DIGICOM SYSTEMS, SCOUT PLUS
(EXTERNAL)