(TXT) View Source
# COMPUTER PERIPHERALS, INC.
EUROVIVA 14.4I FAX
Modem Type Data (synchronous/asynchronous)/Fax
Maximum Data Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Bus 8-bit ISA
Fax Class Class I & II
Data Modulation Bell 103A/212A
Protocol
ITU-T V.21, V.22, V.22bis, V.23, V.32,
V.32bis
Fax Modulation ITU-T V.17, V.27ter, V.29
Protocol
Error MNP5, V.42, V.42bis
Correction/Compression
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|-------------------+----------+------------------+----------|
| Line out | CN1 | Line in | CN2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE I/O ADDRESS SELECTION |
|------------------------------------------------------------|
| Port | SW1/1 | SW1/2 | SW1/3 | SW1/4 |
|----------------+----------+----------+----------+----------|
| COM1: (3F8h) | On | Off | Off | Off |
|----------------+----------+----------+----------+----------|
| COM2: (2F8h) | Off | On | Off | Off |
|----------------+----------+----------+----------+----------|
| COM3: (3E8h) | Off | Off | On | Off |
|----------------+----------+----------+----------+----------|
| » COM4: (2E8h) | Off | Off | Off | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | JP1/A | JP1/B | JP1/C | JP1/D |
|---------+------------+------------+------------+-----------|
| 2 | Open | Open | Open | Closed |
|---------+------------+------------+------------+-----------|
| » 3 | Closed | Open | Open | Open |
|---------+------------+------------+------------+-----------|
| 4 | Open | Closed | Open | Open |
|---------+------------+------------+------------+-----------|
| 5 | Open | Open | Closed | Open |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| AUTO-RETRAIN |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %En [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects auto-retrain mode |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| » %E0 | Auto-retrain disabled |
|--------------+---------------------------------------------|
| %E1 | Auto-retrain enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S14 |
|------------------------------------------------------------|
| Format | AT [cmds] S14? [cmds] |
|-----------------+------------------------------------------|
| Default: | Read-only |
|-----------------+------------------------------------------|
| Range: | 0-255 |
|-----------------+------------------------------------------|
| Unit: | Bit-mapped |
|-----------------+------------------------------------------|
| Description: | Displays echo, result codes, dial mode, |
| | and originate/answer mode |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+------------+------------------------------------|
| 0 | 0 | Not used |
|----------+------------+------------------------------------|
| 1 | 0 | Command echo function disabled |
| | | |
| | 1 | Command echo function enabled |
|----------+------------+------------------------------------|
| 2 | 0 | Result code sending enabled |
| | | |
| | 1 | Result code sending disabled |
|----------+------------+------------------------------------|
| 3 | 0 | Numeric format enabled |
| | | |
| | 1 | Verbose format enabled |
|----------+------------+------------------------------------|
| 4 | 0 | Not used |
|----------+------------+------------------------------------|
| 5 | 0 | Tone dialing mode enabled |
| | | |
| | 1 | Pulse dialing mode enabled |
|----------+------------+------------------------------------|
| 6 | 0 | Not used |
|----------+------------+------------------------------------|
| 7 | 0 | Answer mode enabled |
| | | |
| | 1 | Originate mode enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S21 |
|------------------------------------------------------------|
| Format | AT [cmds] S21? [cmds] |
|----------------+-------------------------------------------|
| Default: | Read-only |
|----------------+-------------------------------------------|
| Range: | 0 - 255 |
|----------------+-------------------------------------------|
| Unit: | Bit-mapped |
|----------------+-------------------------------------------|
| Description: | Displays jack type, CTS signal, low DTR |
| | action, DCD signal, DSR signal, and the |
| | long space disconnect function |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+-------+-----------------------------------------|
| 0 | 0 | Selects RJ-11, RJ-41S, or RJ45S jack |
| | | |
| | 1 | Selects RJ-12 or RJ-13 jack |
|----------+-------+-----------------------------------------|
| 1 | 0 | Not used |
|----------+-------+-----------------------------------------|
| 2 | 0 | CTS follows RTS |
| | | |
| | 1 | CTS forced high |
|----------+-------+-----------------------------------------|
| 4, 3 | 00 | DTR signal ignored |
| | | |
| | 01 | Modem goes to command mode on low DTR |
| | | |
| | 10 | Modem disconnects on low DTR. |
| | | Auto-Answer is disabled. |
| | 11 | |
| | | Modem is initialized on low DTR |
|----------+-------+-----------------------------------------|
| 5 | 0 | DCD forced high |
| | | |
| | 1 | DCD normal |
|----------+-------+-----------------------------------------|
| 6 | 0 | DSR forced high |
| | | |
| | 1 | DSR normal |
|----------+-------+-----------------------------------------|
| 7 | 0 | Long space disconnect function disabled |
| | | |
| | 1 | Long space disconnect function enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S22 |
|------------------------------------------------------------|
| Format | AT [cmds] S22? [cmds] |
|----------------+-------------------------------------------|
| Default: | Read-only |
|----------------+-------------------------------------------|
| Range: | 0-255 |
|----------------+-------------------------------------------|
| Unit: | Bit-mapped |
|----------------+-------------------------------------------|
| Description: | Displays speaker volume and controls |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+-----------+-------------------------------------|
| 1, 0 | 00 | Off volume |
| | | |
| | 01 | On volume |
| | | |
| | 10 | Medium level volume |
| | | |
| | 11 | High level volume |
|----------+-----------+-------------------------------------|
| 3, 2 | 00 | Speaker off |
| | | |
| | 01 | Speaker off on carrier |
| | | |
| | 10 | Speaker always on |
| | | |
| | 11 | Speaker on during handshake |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S23 |
|------------------------------------------------------------|
| Format | AT [cmds] S23? [cmds] |
|----------------+-------------------------------------------|
| Default: | Read-only |
|----------------+-------------------------------------------|
| Range: | 0-255 |
|----------------+-------------------------------------------|
| Unit: | Bit-mapped |
|----------------+-------------------------------------------|
| Description: | Displays DTE rate and parity |
|------------------------------------------------------------|
| Bit | Value | Function |
|-----------+-------+----------------------------------------|
| 0 | 0 | Not used |
|-----------+-------+----------------------------------------|
| 3, 2, 1 | 000 | Sets serial port speed to 0-300bps |
| | | |
| | 001 | Sets serial port speed to 600bps |
| | | |
| | 010 | Sets serial port speed to 1200bps |
| | | |
| | 011 | Sets serial port speed to 2400bps |
| | | |
| | 100 | Sets serial port speed to 4800bps |
| | | |
| | 101 | Sets serial port speed to 9600bps |
| | | |
| | 110 | Sets serial port speed to 14400bps |
|-----------+-------+----------------------------------------|
| 5,4 | 00 | Parity even |
| | | |
| | 01 | Space Parity |
| | | |
| | 10 | Parity odd |
| | | |
| | 11 | Mark /No Parity |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S27 |
|------------------------------------------------------------|
| Format | AT [cmds] S27? [cmds] |
|------------------+-----------------------------------------|
| Default: | Read-only |
|------------------+-----------------------------------------|
| Range: | 0-255 |
|------------------+-----------------------------------------|
| Unit: | Bit-mapped |
|------------------+-----------------------------------------|
| Description: | Displays synchronous/asynchronous mode, |
| | line type |
|------------------------------------------------------------|
| Bit | Value | Function |
|------------+----------+------------------------------------|
| 3, 1, 0 | 000 | Asynchronous mode |
| | | |
| | 001 | Asynchronous command mode and |
| | | synchronous connect mode |
| | 010 | |
| | | Asynchronous command mode and |
| | 011 | synchronous connect mode, DTR |
| | | forced high |
| | 101 | |
| | | Asynchronous command mode on low |
| | 110 | DTR, synchronous connect mode on |
| | | high DTR |
| | | |
| | | Error correction mode |
| | | |
| | | Buffered asynchronous mode |
|------------+----------+------------------------------------|
| 2 | 1 | Leased line |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S31 |
|------------------------------------------------------------|
| Format | AT [cmds] S31? [cmds] |
|-----------------+------------------------------------------|
| Default: | Read-only |
|-----------------+------------------------------------------|
| Range: | 0-255 |
|-----------------+------------------------------------------|
| Unit: | Bit-mapped |
|-----------------+------------------------------------------|
| Description: | Displays automatic speed detection and |
| | result codes |
|------------------------------------------------------------|
| Bit | Value | Function |
|-----------+-------+----------------------------------------|
| 0 | 0 | Not used |
|-----------+-------+----------------------------------------|
| 1 | 0 | Automatic speed detection disabled |
| | | |
| | 1 | Automatic speed detection enabled |
|-----------+-------+----------------------------------------|
| 3, 2 | 00 | DTE speed displayed in result codes |
| | | |
| | 01 | Extended result codes enabled, DCE and |
| | | DTE speed displayed in result codes. |
| | 10 | |
| | | DCE speed displayed in result codes |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S40 |
|------------------------------------------------------------|
| Format | AT [cmds] S40? [cmds] |
|----------------+-------------------------------------------|
| Default: | Read-only |
|----------------+-------------------------------------------|
| Range: | 0-255 |
|----------------+-------------------------------------------|
| Unit: | Bit-mapped |
|----------------+-------------------------------------------|
| Description: | Displays break handling, MNP10, and block |
| | size |
|------------------------------------------------------------|
| Bit | Value | Function |
|-----------+--------+---------------------------------------|
| 0 | 0 | MNP10 disabled |
| | | |
| | 1 | MNP10 enabled |
|-----------+--------+---------------------------------------|
| 2, 1 | 0 | Not used |
|-----------+--------+---------------------------------------|
| 5, 4, 3 | 000 | \K0 |
| | | |
| | 001 | \K1 |
| | | |
| | 010 | \K2 |
| | | |
| | 011 | \K3 |
| | | |
| | 100 | \K4 |
| | | |
| | 101 | \K5 |
|-----------+--------+---------------------------------------|
| 7, 6 | 00 | MNP block size is 64 characters |
| | | |
| | 01 | MNP block size is 128 characters |
| | | |
| | 10 | MNP block size is 192 characters |
| | | |
| | 11 | MNP block size is 256 characters |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S41 |
|------------------------------------------------------------|
| Format | AT [cmds] S41? [cmds] |
|-----------------+------------------------------------------|
| Default: | Read-only |
|-----------------+------------------------------------------|
| Range: | 0-255 |
|-----------------+------------------------------------------|
| Unit: | Bit-mapped |
|-----------------+------------------------------------------|
| Description: | Selects compression, auto-retrain, flow |
| | control, and MNP mode |
|------------------------------------------------------------|
| Bit | Value | Function |
|-----------+-------------+----------------------------------|
| 1 - 0 | 00 | Data compression disabled |
| | | |
| | 01 | MNP5 enabled |
| | | |
| | 10 | V.42bis enabled |
| | | |
| | 11 | MNP5 and V.42bis enabled |
|-----------+-------------+----------------------------------|
| 2 | 0 | Auto-retrain disabled |
| | | |
| | 1 | Auto-retrain enabled |
|-----------+-------------+----------------------------------|
| 3 | 0 | Flow control disabled |
| | | |
| | 1 | Flow control enabled |
|-----------+-------------+----------------------------------|
| 4 | 0 | Stream mode for MNP |
| | | |
| | 1 | Block mode for MNP |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIT-MAPPED REGISTER S80 |
|------------------------------------------------------------|
| Format | AT [cmds] S80? [cmds] |
|-----------------+------------------------------------------|
| Default: | Read-only |
|-----------------+------------------------------------------|
| Range: | 0-255 |
|-----------------+------------------------------------------|
| Unit: | Bit-mapped |
|-----------------+------------------------------------------|
| Description: | Displays command sets, remote |
| | configuration, call back security, and |
| | answer/originate mode |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+------------+------------------------------------|
| 0 | 0 | AT command set enabled |
| | | |
| | 1 | V.25bis command set enabled |
|----------+------------+------------------------------------|
| 1 | 0 | Remote configuration disabled |
| | | |
| | 1 | Remote configuration enabled |
|----------+------------+------------------------------------|
| 2 | 0 | Call back security disabled |
| | | |
| | 1 | Call back security enabled |
|----------+------------+------------------------------------|
| 3 | 0 | Originate mode |
| | | |
| | 1 | Answer mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BREAK SEND |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Bn [cmds] |
|--------------+---------------------------------------------|
| Default: | 3 |
|--------------+---------------------------------------------|
| Range: | 1-9 |
|--------------+---------------------------------------------|
| Unit: | .1 second |
|--------------+---------------------------------------------|
| Description: | Sends break to modem |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BREAK TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Kn [cmds] |
|--------------+---------------------------------------------|
| Description: | Configures action of break signal. |
|------------------------------------------------------------|
| Command | Break from | Modem | Break |
| | DTE | receives \B | received |
| | | | from remote |
| | | | modem |
|---------------+---------------+--------------+-------------|
| \K0 | Online | Break sent | Buffers |
| | command mode | to remote | cleared, |
| | enabled, send | modem and | break sent |
| | no break to | buffered | to DTE |
| | remote modem | cleared | |
|---------------+---------------+--------------+-------------|
| \K1 | Break sent to | Break sent | Buffers |
| | remote modem | to remote | cleared, |
| | and buffered | modem and | break sent |
| | cleared | buffered | to DTE |
| | | cleared | |
|---------------+---------------+--------------+-------------|
| \K2 | Online | Send break | Break sent |
| | command mode | to remote | immediately |
| | enabled, send | modem | to DTE |
| | no break to | immediately | |
| | remote modem | | |
|---------------+---------------+--------------+-------------|
| \K3 | Send break to | Send break | Break sent |
| | remote modem | to remote | immediately |
| | immediately | modem | to DTE |
| | | immediately | |
|---------------+---------------+--------------+-------------|
| \K4 | Online | Send break | Break sent |
| | command mode | with | with |
| | enabled, send | transmitted | received |
| | no break to | data | data to the |
| | remote modem | | DTE |
|---------------+---------------+--------------+-------------|
| » \K5 | Send break | Send break | Break sent |
| | with | with | with |
| | transmitted | transmitted | received |
| | data | data | data to the |
| | | | DTE |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPRESSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects data compression |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %C0 | Data compression disabled |
|--------------+---------------------------------------------|
| %C1 | MNP5 enabled |
|--------------+---------------------------------------------|
| %C2 | V.42bis enabled |
|--------------+---------------------------------------------|
| » %C3 | MNP5 and V.42bis enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECT MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets connect mode |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \N0 | Normal mode enabled |
|--------------+---------------------------------------------|
| \N1 | Direct mode enabled |
|--------------+---------------------------------------------|
| \N2 | LAP-M mode with fallback to MNP enabled |
|--------------+---------------------------------------------|
| » \N3 | MNP mode with fallback to normal mode |
| | enabled |
|--------------+---------------------------------------------|
| \N4 | LAP-M mode only enabled |
|--------------+---------------------------------------------|
| \N5 | MNP mode only enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY CURRENT COMMAND STATUS |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \S [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays current setting of modem commands |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Gn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects modem port flow control |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| » \G0 | Flow control disabled |
|--------------+---------------------------------------------|
| \G1 | Flow control enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL CHARACTER - XOFF |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S33=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 19 |
|--------------+---------------------------------------------|
| Range: | 0-255 |
|--------------+---------------------------------------------|
| Unit: | ASCII |
|--------------+---------------------------------------------|
| Description: | Sets the character used to represent XOFF |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL CHARACTER - XON |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S32=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 17 |
|--------------+---------------------------------------------|
| Range: | 0-255 |
|--------------+---------------------------------------------|
| Unit: | ASCII |
|--------------+---------------------------------------------|
| Description: | Sets the character used to represent XON |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LINE SIGNAL LEVEL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L [cmds] |
|--------------+---------------------------------------------|
| Range: | 9-43 |
|--------------+---------------------------------------------|
| Unit: | -1dBm |
|--------------+---------------------------------------------|
| Description: | Returns recieved line signal level |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MAXIMUM BLOCK SIZE FOR TRANSMISSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \An [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the maximum transmittable block size |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \A0 | Maximum MNP block size is 64 characters |
|--------------+---------------------------------------------|
| \A1 | Maximum MNP block size is 128 characters |
|--------------+---------------------------------------------|
| \A2 | Maximum MNP block size is 192 characters |
|--------------+---------------------------------------------|
| » \A3 | Maximum MNP block size is 256 characters |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MNP STREAM/BLOCK MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Ln [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the transfer mode for MNP |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| » \L0 | Stream mode for MNP enabled |
|--------------+---------------------------------------------|
| \L1 | Block mode for MNP enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SLEEP TIMER |
|------------------------------------------------------------|
| Format | AT [cmds] S24=n [cmds] |
|--------------+---------------------------------------------|
| Default: | Unidentified |
|--------------+---------------------------------------------|
| Range: | 0-255 |
|--------------+---------------------------------------------|
| Unit: | 10 seconds |
|--------------+---------------------------------------------|
| Description: | Maximum duration of DTE and DCE inactivity |
| | allowed prior to initiating low-power sleep |
| | mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.23 SPEED DIRECTION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Fn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects V.23 speed and direction |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %F1 | 75bps transmit/1200bps receive enabled |
|--------------+---------------------------------------------|
| %F2 | 75bps receive/1200bps transmit enabled |
|--------------+---------------------------------------------|
| %F3 | V.23 split baud mode disabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.23 SPLIT BAUD MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Wn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls V.23 split baud mode |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| » \W0 | V.23 split baud mode disabled |
|--------------+---------------------------------------------|
| \W1 | V.23 split baud mode enabled |
+------------------------------------------------------------+
Proprietary V.25bis Command Set
+------------------------------------------------------------+
| DISPLAY STORED NUMBERS |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | RLI |
|--------------+---------------------------------------------|
| Description: | Requests the modem to return the list of |
| | station IDs. If no numbers are stored, the |
| | modem will return LSI |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY STORED NUMBERS |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | RLNn |
|--------------+---------------------------------------------|
| Description: | Requests the modem to return the stored |
| | number in memory location n. If no number |
| | is given, all stored numbers will be |
| | displayed. If no numbers are stored, the |
| | modem will return LSN. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| STATION ID LIST |
|------------------------------------------------------------|
| Type: | Result code |
|--------------+---------------------------------------------|
| Format: | LSInnn;<#>;xxxx |
|--------------+---------------------------------------------|
| Description: | Displays station IDs |
+------------------------------------------------------------+
+------------------------------------------------------------+
| STATION ID SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | PRInn;<#>;xxxx |
|--------------+---------------------------------------------|
| Description: | Records station ID, with n = 1-20. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| STORED NUMBERS LIST |
|------------------------------------------------------------|
| Type: | Result code |
|--------------+---------------------------------------------|
| Format: | LSNxxxx |
|--------------+---------------------------------------------|
| Description: | Displays stored numbers. xxxx may specify a |
| | memory location, phone number, or status. |
| | If no code was specified with RLN, all |
| | stored numbers are displayed. |
+------------------------------------------------------------+