(TXT) View Source
       
       # ADTRAN
       
          NT1 ACE
       
          Card Type      ISDN T1                                         
          Chip Set       Unidentified                                    
          I/O Options    ST local bus interface via RJ-45 connectors     
                         (2), power                                      
                                                                         
                         U T1 network interface via RJ-45 connector      
          T1 Data Rate   1.544Mbps                                       
          ISDN D-channel X.25                                            
          Protocol       
          Line Coding    2B1Q                                            
          Framing        Unidentified                                    
          Data Bus       External                                        
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |          Function          | Label |   Function    | Label |
          |----------------------------+-------+---------------+-------|
          | S/T ISDN local bus         |  CN1  | U T1 network  |  CN3  |
          | interface (RJ-45)          |       | interface via |       |
          |                            |       | (RJ-45)       |       |
          |----------------------------+-------+---------------+-------|
          | S/T ISDN local bus         |  CN2  | Power         |  CN4  |
          | interface (RJ-45)          |       |               |       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |               Function                | Label |  Position  |
          |---------------------------------------+-------+------------|
          | Short passive bus configuration       |  SW1  |     On     |
          |---------------------------------------+-------+------------|
          | Extended passive bus cinfiguration    |  SW1  |    Off     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                   LOCAL BUS TERMINATION                    |
          |------------------------------------------------------------|
          |                Function                | Label | Position  |
          |----------------------------------------+-------+-----------|
          | Local bus termination disabled         |  SW2  |     1     |
          |----------------------------------------+-------+-----------|
          | 50 Ohm local bus termination enabled   |  SW2  |     2     |
          |----------------------------------------+-------+-----------|
          | 100 Ohm local bus termination enabled  |  SW2  |     3     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          | LED | Color  |  Status  |            Condition             |
          |-----+--------+----------+----------------------------------|
          | RDY | Green  |    On    | Network is ready to place a call |
          |-----+--------+----------+----------------------------------|
          | RDY | Green  | Blinking |     U interface not ready or     |
          |     |        |  (fast)  |        performing a test         |
          |-----+--------+----------+----------------------------------|
          | RDY | Green  | Blinking |    S/T interface not ready or    |
          |     |        |  (slow)  |        performing a test         |
          |-----+--------+----------+----------------------------------|
          | RDY | Green  |   Off    | Network not functioning or unit  |
          |     |        |          |      is not receiving power      |
          |-----+--------+----------+----------------------------------|
          | ERR |  Red   |    On    |   Error condition detected on    |
          |     |        |          |       network or local bus       |
          |-----+--------+----------+----------------------------------|
          | ERR |  Red   |   Off    |   Error condition not detected   |
          |-----+--------+----------+----------------------------------|
          | PWR | Green  |    On    |           Power is on            |
          |-----+--------+----------+----------------------------------|
          | PWR | Green  |   Off    |           Power is off           |
          |------------------------------------------------------------|
          | Note:                                                      |
          |                                                            |
          | If ERR indicator is illuminated, pulse rate of RDY         |
          | indicator will determine error source. If RDY indicator is |
          | blinking, and ERR indicator is off, then a test is in      |
          | progress.                                                  |
          +------------------------------------------------------------+