(TXT) View Source
# BOCA RESEARCH, INC.
SOUND EXPRESSION (SE14SRS)
Card Type Sound/Modem card
Chip Set Unidentified
Maximum Onboard Memory Unidentified
I/O Options Game/MIDI port, CD-ROM interface - IDE,
Audio in - CD-ROM (3), speaker, line
out, line in, microphone in, telephone
jack
Maximum Modem Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Modulation Bell 103A/212A
Protocol
ITU-T V.22, V.22bis, V.32, V.32bis
Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29
Protocol
Error MNP5, V.42, V.42bis
Correction/Compression
Fax Class Class I & II
Data Bus 16-bit ISA
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location | Function | Location |
|------------------------------------------------------------|
| Game/MIDI port | CN1 | Wavetable | CN6 |
|-------------------+---------+-----------------+------------|
| Speaker | CN2 | CD-ROM | CN7 |
| | | interface - IDE | |
|-------------------+---------+-----------------+------------|
| Line out | CN3 | Audio in - | J9 |
| | | CD-ROM | |
| | | (Mitsumi) | |
|-------------------+---------+-----------------+------------|
| Line in | CN4 | Audio in - | J10 |
| | | CD-ROM | |
| | | (Panasonic) | |
|-------------------+---------+-----------------+------------|
| RJ-11 telephone | CN5 | Audio in - | J11 |
| jack | | CD-ROM | |
| | | (Sony/IDE) | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SUPPORTED COMMAND SET |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| AT, ‘+++’, ‘comma’, A/ |
|------------------------------------------------------------|
| A, B, C, E, H, L, M, O, Q, R, S, T, U, V, W, X, Y, Z |
|------------------------------------------------------------|
| &C, &F, &P, &q, &R, &S, &T, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B |
|------------------------------------------------------------|
| %C, %E, %L, %Q |
|------------------------------------------------------------|
| S Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S14, S16, S18, S21, S22, S23, S24, S25, |
|------------------------------------------------------------|
| S26, S27, S28, S29, S30,S31, S32, S33, S36, S38, S39, S40, |
| S41, S46, S48, S82, S86, S91, S92, |
|------------------------------------------------------------|
| S95 |
|------------------------------------------------------------|
| Special Commands |
|------------------------------------------------------------|
| +MS?, +MS |
|------------------------------------------------------------|
| Note: See MHI Help File for full command documentation. |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| DIAL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] D<#> [cmds] |
|--------------+---------------------------------------------|
| Description: | Dials telephone number according to any |
| | modifiers included in the string |
|--------------+---------------------------------------------|
| Note: | Any combination of modifiers can be used to |
| | produce the desired dial functions in |
| | sequence. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| D | Dial |
|--------------+---------------------------------------------|
| DL | Re-dial last number |
|--------------+---------------------------------------------|
| DP | Pulse dialing enabled |
|--------------+---------------------------------------------|
| DS=n | Dial stored telephone number n |
|--------------+---------------------------------------------|
| DT | Tone dialing enabled/Pulse dialing disabled |
|--------------+---------------------------------------------|
| DW | Dialing resumed following dial tone |
| | detection |
|--------------+---------------------------------------------|
| D, | Dialing paused for amount of time specified |
| | in S8 register |
|--------------+---------------------------------------------|
| D! | Flash function initiated. Modem commanded |
| | to go off-hook for specified time before |
| | returning on-hook. |
|--------------+---------------------------------------------|
| D@ | Wait for Quite Answer function enabled. |
| | Modem waits until a "quiet answer," a |
| | ring-back signal followed by silence up to |
| | the time specified in S7, is received prior |
| | to executing the rest of the dial string. |
|--------------+---------------------------------------------|
| D; | Modem returned to idle state after dialing. |
| | The semicolon can only be placed at the end |
| | of the dial command. |
|--------------+---------------------------------------------|
| D^ | Disable dialing code. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REPORT INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information requested |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Reports product ID |
|--------------+---------------------------------------------|
| I1 | Reports checksum |
|--------------+---------------------------------------------|
| I2 | Tests and reports ROM checksum |
|--------------+---------------------------------------------|
| I3 | Reports firmware revision |
|--------------+---------------------------------------------|
| I4 | Reports OEM-defined identifier string. |
|--------------+---------------------------------------------|
| I5 | Reports country code |
|--------------+---------------------------------------------|
| I6 | Reports modem data pump model |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AUTO-MODE DETECTION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects various options for the automatic |
| | detection and negotiation of protocols |
| | during the handshake process if the modem |
| | is communicating with a remote modem of |
| | dissimilar speed. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| N0 | Auto-mode detection disabled |
|--------------+---------------------------------------------|
| í N1 | Permits handshaking at any speed supported |
| | by both modems. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA TERMINAL READY (DTR) |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Dn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects modem response to DTR |
|------------------------------------------------------------|
| Note: The action each variant of &D causes depends on |
| the setting of &Q |
|------------------------------------------------------------|
| &Q Setting | &D0 | &D1 | &D2 | &D3 |
|----------------+----------+----------+----------+----------|
| í &Q0, &Q5, | Command | Command | Command | Command |
| &Q6 | 0 | 3 | 2 | 4 |
|----------------+----------+----------+----------+----------|
| &Q1, &Q4 | Command | Command | Command | Command |
| | 1 | 3 | 2 | 4 |
|----------------+----------+----------+----------+----------|
| &Q2, &Q3 | Command | Command | Command | Command |
| | 2 | 2 | 2 | 2 |
|------------------------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| Command 0 | Modem does not respond to DTR |
|--------------+---------------------------------------------|
| Command 1 | Modem disconnects (hangs up) after DTR goes |
| | off; Auto-Answer not affected |
|--------------+---------------------------------------------|
| í Command 2 | Modem goes to command mode and disconnects |
| | (hangs up) after DTR goes off; Auto-Answer |
| | is disabled. |
|--------------+---------------------------------------------|
| Command | Asynchronous escape sequence |
| | |
| 3 | |
|--------------+---------------------------------------------|
| Command 4 | Modem does a soft reset |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Kn [cmds] |
|--------------+---------------------------------------------|
| Description: | Enables flow control options |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &K0 | Flow control disabled |
|--------------+---------------------------------------------|
| í &K3 | RTS/CTS flow control enabled |
|--------------+---------------------------------------------|
| &K4 | XON/XOFF flow control enabled |
|--------------+---------------------------------------------|
| &K5 | Enable transport XON/XOFF |
|--------------+---------------------------------------------|
| &K6 | Enable both RTS/CTS and XON/XOFF |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BREAK TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|---------------------+--------------------------------------|
| Format: | AT [cmds] \Kn [cmds] |
|---------------------+--------------------------------------|
| Description: | Configures action of break signal |
|------------------------------------------------------------|
| Command | Break from | Break from DTE | Break received |
| | DTE | during Direct | from remote |
| | | Mode | modem |
|-----------+--------------+----------------+----------------|
| \K0 | Online | Break sent to | Buffers |
| | command mode | remote modem | cleared, break |
| | enabled, | and command | sent to DTE |
| | send no | entered | |
| | break to | | |
| | remote modem | | |
|-----------+--------------+----------------+----------------|
| \K1 | Break sent | Break sent to | Buffers |
| | to remote | remote modem | cleared, break |
| | modem and | and command | sent to DTE |
| | buffered | entered | |
| | cleared | | |
|-----------+--------------+----------------+----------------|
| \K2 | Online | Send break | Break sent |
| | command mode | with | immediately to |
| | enabled, | transmitted | DTE |
| | send no | data | |
| | break to | | |
| | remote modem | | |
|-----------+--------------+----------------+----------------|
| \K3 | Send break | Break sent to | Break sent |
| | to remote | remote modem | immediately to |
| | modem | and command | DTE |
| | immediately | entered | |
|-----------+--------------+----------------+----------------|
| \K4 | Online | Send break | Break sent |
| | command mode | with | with received |
| | enabled, | transmitted | data to the |
| | send no | data | DTE |
| | break to | | |
| | remote modem | | |
|-----------+--------------+----------------+----------------|
| í \K5 | Send break | Send break | Break sent |
| | with | with | with received |
| | transmitted | transmitted | data to the |
| | data | data | DTE |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECT MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the type of connection the modem |
| | will operate in |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \N0 | Normal mode enabled |
|--------------+---------------------------------------------|
| \N1 | Direct mode enabled |
|--------------+---------------------------------------------|
| \N2 | MNP reliable mode enabled |
|--------------+---------------------------------------------|
| \N3 | Auto-reliable mode or MNP auto-reliable |
| | mode enabled |
|--------------+---------------------------------------------|
| \N4 | V.42 reliable mode enabled |
|--------------+---------------------------------------------|
| \N5 | V.42 auto-reliable mode or MNP |
| | auto-reliable mode enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DCE LINE SPEED |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format | AT [cmds] S37=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the maximum allowable data exchange |
| | rate attempted during handshake process. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í S37=0 | Speed of last connection |
|--------------+---------------------------------------------|
| S37=1-3 | 300bps |
|--------------+---------------------------------------------|
| S37=4 | Reserved |
|--------------+---------------------------------------------|
| S37=5 | 1200bps |
|--------------+---------------------------------------------|
| S37=6 | 2400bps |
|--------------+---------------------------------------------|
| S37=7 | V.23 mode |
|--------------+---------------------------------------------|
| S37=8 | 4800bps |
|--------------+---------------------------------------------|
| S37=9 | 9600bps |
|--------------+---------------------------------------------|
| S37=10 | 12.0Kbps |
|--------------+---------------------------------------------|
| S37=11 | 14.4Kbps |
|--------------+---------------------------------------------|
| S37=12 | 7200bps |
+------------------------------------------------------------+
RESULT CODES
+------------------------------------------------------------+
| BASIC RESULT CODES |
|------------------------------------------------------------|
| Numeric | Verbose | Wn | Function |
|---------+--------------+----+------------------------------|
| 0 | OK | W0 | Modem has successfully |
| | | | executed the previous |
| | | | command and has returned to |
| | | | the on-line command state. |
|---------+--------------+----+------------------------------|
| 1 | CONNECT | W0 | Connection established at |
| | | | unspecified rate. |
|---------+--------------+----+------------------------------|
| 2 | RING | W0 | Incoming ring detected. |
|---------+--------------+----+------------------------------|
| 3 | NO CARRIER | W0 | Carrier signal lost or no |
| | | | connection established. |
|---------+--------------+----+------------------------------|
| 4 | ERROR | W0 | Last command issued was not |
| | | | valid. |
|---------+--------------+----+------------------------------|
| 5 | CONNECT 1200 | W0 | Connection established at |
| | | | 1200bps. |
|---------+--------------+----+------------------------------|
| 6 | NO DIALTONE | W0 | No dial tone was detected |
| | | | within the time allotted by |
| | | | S7. |
|---------+--------------+----+------------------------------|
| 7 | BUSY | W0 | A busy tone was detected |
| | | | after dialing. |
|---------+--------------+----+------------------------------|
| 8 | NO ANSWER | W0 | No quiet answer (ring-back |
| | | | followed by silence) was |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 9 | CONNECT 600 | WO | Connection established at |
| | | | 600bps |
|---------+--------------+----+------------------------------|
| 10 | CONNECT 2400 | W0 | Connection established at |
| | | | 2400bps. |
|---------+--------------+----+------------------------------|
| 11 | CONNECT 4800 | W0 | Connection established at |
| | | | 4800bps. |
|---------+--------------+----+------------------------------|
| 12 | CONNECT 9600 | W0 | Connection established at |
| | | | 9600bps. |
|---------+--------------+----+------------------------------|
| 13 | CONNECT 7200 | WO | Connected as data modem |
| | | | during answer. |
|---------+--------------+----+------------------------------|
| 14 | CONNECT | WO | Connection established at |
| | 12000 | | 12000bps. |
|---------+--------------+----+------------------------------|
| 15 | CONNECT | W0 | Connection established at |
| | 14400 | | 14.4K bps. |
|---------+--------------+----+------------------------------|
| 16 | CONNECT | W0 | Connection established at |
| | 19200 | | 19.2K bps. |
|---------+--------------+----+------------------------------|
| 17 | CONNECT | W0 | Connection established at |
| | 38400 | | 38.4K bps. |
|---------+--------------+----+------------------------------|
| 18 | CONNECT | W0 | Connection established at |
| | 57600 | | 57.6K bps. |
|---------+--------------+----+------------------------------|
| 19 | CONNECT | W0 | Connection established at |
| | 115200 | | 115.2K bps. |
|---------+--------------+----+------------------------------|
| 22 | CONNECT | W0 | Connection established at |
| | 75/1200 | | transmit 75/receive 1200bps. |
|---------+--------------+----+------------------------------|
| 23 | CONNECT | W0 | Connection established at |
| | 1200/75 | | transmit 1200/receive 75bps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASIC RESULT CODES (cont'd) |
|------------------------------------------------------------|
| Numeric | Verbose | Wn | Function |
|---------+-------------+----+-------------------------------|
| 24 | DELAYED | WO | Connection fails and number |
| | | | dialed is "delayed" due to |
| | | | country blacklisting. |
|---------+-------------+----+-------------------------------|
| 32 | BLACKLISTED | WO | Connection failed and the |
| | | | number dialed is considered |
| | | | "blacklisted" |
|---------+-------------+----+-------------------------------|
| 33 | FAX | W0 | Fax connection established. |
|---------+-------------+----+-------------------------------|
| 35 | DATA | W0 | Data connection established. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES |
|------------------------------------------------------------|
| Numeric | Verbose | Wn | Function |
|---------+--------------+----+------------------------------|
| 40 | CARRIER 300 | W1 | Carrier signal at 300bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 44 | CARRIER | W1 | Carrier signal at transmit |
| | 1200/75 | | 1200/receive 75bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 45 | CARRIER | W1 | Carrier signal at transmit |
| | 75/1200 | | 1200/receive 75bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 46 | CARRIER 1200 | W1 | Carrier signal at 1200bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 47 | CARRIER 2400 | W1 | Carrier signal at 2400bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 48 | CARRIER 4800 | W1 | Carrier signal at 4800bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 49 | CARRIER 7200 | W1 | Carrier signal at 7200bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 50 | CARRIER 9600 | W1 | Carrier signal at 9600bps is |
| | | | detected. |
|---------+--------------+----+------------------------------|
| 51 | CARRIER | W1 | Carrier signal at 12.0K bps |
| | 12000 | | is detected. |
|---------+--------------+----+------------------------------|
| 52 | CARRIER | W1 | Carrier signal at 14.4K bps |
| | 14400 | | is detected. |
|---------+--------------+----+------------------------------|
| 53 | CARRIER | W1 | Carrier signal at 16.8K bps |
| | 16800 | | is detected. |
|---------+--------------+----+------------------------------|
| 54 | CARRIER | W1 | Carrier signal at 19.2K bps |
| | 19200 | | is detected. |
|---------+--------------+----+------------------------------|
| 55 | CARRIER | W1 | Carrier signal at 21.6K bps |
| | 21600 | | is detected. |
|---------+--------------+----+------------------------------|
| 56 | CARRIER | W1 | Carrier signal at 24.0K bps |
| | 24000 | | is detected. |
|---------+--------------+----+------------------------------|
| 57 | CARRIER | W1 | Carrier signal at 26.4K bps |
| | 26400 | | is detected. |
|---------+--------------+----+------------------------------|
| 58 | CARRIER | W1 | Carrier signal at 28.8K bps |
| | 28800 | | is detected. |
|---------+--------------+----+------------------------------|
| 59 | CONNECT | W0 | Connection established at |
| | 16800 | | 16.8K bps. |
|---------+--------------+----+------------------------------|
| 61 | CONNECT | W0 | Connection established at |
| | 21600 | | 21.6K bps. |
|---------+--------------+----+------------------------------|
| 62 | CONNECT | W0 | Connection established at |
| | 24000 | | 24.0K bps. |
|---------+--------------+----+------------------------------|
| 63 | CONNECT | W0 | Connection established at |
| | 26400 | | 26.4K bps. |
|---------+--------------+----+------------------------------|
| 64 | CONNECT | W0 | Connection established at |
| | 28800 | | 28.8K bps. |
|---------+--------------+----+------------------------------|
| 66 | COMPRESSION: | W1 | MNP Class 5 data compression |
| | CLASS 5 | | was negotiated. |
|---------+--------------+----+------------------------------|
| 67 | COMPRESSION: | W1 | V.42bis data compression was |
| | V.42BIS | | negotiated. |
|---------+--------------+----+------------------------------|
| 69 | COMPRESSION: | W1 | No data compression was |
| | NONE | | negotiated. |
|---------+--------------+----+------------------------------|
| 70 | PROTOCOL: | W1 | No protocol was negotiated. |
| | NONE | | |
|---------+--------------+----+------------------------------|
| 77 | PROTOCOL: | W1 | V.42 LAPM error-control was |
| | LAP-M | | negotiated. |
|---------+--------------+----+------------------------------|
| 80 | PROTOCOL: | W1 | MNP error-control was |
| | ALT | | negotiated. |
|---------+--------------+----+------------------------------|
| 81 | PROTOCOL: | W1 | Modem connected in the MNP10 |
| | ALT-CELLULAR | | mode. |
+------------------------------------------------------------+