(TXT) View Source
       
       # BOCA RESEARCH, INC.
       
          MULTIMEDIA MODEM FDV14I, MULTIMEDIA MODEM FDVV14I
       
          Card Type              Modem (asynchronous)                    
          Chipset                Rockwell                                
          I/O Options            Microphone in, speaker out, voice       
          Maximum Data Rate      14.4Kbps                                
          Maximum Fax Rate       14.4Kbps                                
          Data Modulation        Bell 103A/212A                          
                                                                         
                                 ITU-T V.21, V.22, V.22bis, V.23, V.32,  
                                 V.32bis                                 
          Fax Modulation         ITU-T V.17, V.21CH2, V.27ter, V.29      
          Error                  MNP5, MNP10, V.42, V.42bis              
          Correction/Compression 
          Fax Class              Class I & II                            
          Data Bus               8/16 bit ISA                            
          Card Size              Full height, half length                
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |        Function        | Label |     Function      | Label |
          |------------------------+-------+-------------------+-------|
          | Telephone line out     |  CN1  | Microphone in     |  CN3  |
          |------------------------+-------+-------------------+-------|
          | Telephone line in      |  CN2  | Speaker out       |  CN4  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    INTERRUPT SELECTION                     |
          |------------------------------------------------------------|
          |  Setting   |   JP1/A   |   JP1/B   |   JP1/C   |   JP1/D   |
          |------------+-----------+-----------+-----------+-----------|
          |     3      |  Closed   |   Open    |   Open    |   Open    |
          |------------+-----------+-----------+-----------+-----------|
          |     4      |   Open    |  Closed   |   Open    |   Open    |
          |------------+-----------+-----------+-----------+-----------|
          |     5      |   Open    |   Open    |  Closed   |   Open    |
          |------------+-----------+-----------+-----------+-----------|
          |     7      |   Open    |   Open    |   Open    |  Closed   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |               SERIAL PORT ADDRESS SELECTION                |
          |------------------------------------------------------------|
          |   Setting    |   JP1/E   |   JP1/F   |  JP1/G   |  JP1/H   |
          |--------------+-----------+-----------+----------+----------|
          | 3F8h (COM1:) |  Closed   |   Open    |   Open   |   Open   |
          |--------------+-----------+-----------+----------+----------|
          | 2F8h (COM2:) |   Open    |  Closed   |   Open   |   Open   |
          |--------------+-----------+-----------+----------+----------|
          | 3E8h (COM3:) |   Open    |   Open    |  Closed  |   Open   |
          |--------------+-----------+-----------+----------+----------|
          | 2E8h (COM4:) |   Open    |   Open    |   Open   |  Closed  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                SUPPORTED STANDARD COMMANDS                 |
          |------------------------------------------------------------|
          |                     Basic AT Commands                      |
          |------------------------------------------------------------|
          | +++, A/                                                    |
          |------------------------------------------------------------|
          | A, C, E, H, L, M, N, O, Q, V, W, X, Y, Z                   |
          |------------------------------------------------------------|
          | &C, &D, &F, &K, &P, &Q, &S, &T, &V, &W, &Y, &Z             |
          |------------------------------------------------------------|
          |                    Extended AT Commands                    |
          |------------------------------------------------------------|
          | \A, \B, \G, \K, \L, \N, \W                                 |
          |------------------------------------------------------------|
          | %C, %E, %F, %L, %Q                                         |
          |------------------------------------------------------------|
          |                    Special AT Commands                     |
          |------------------------------------------------------------|
          | *H                                                         |
          |------------------------------------------------------------|
          |                        S-Registers                         |
          |------------------------------------------------------------|
          | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14,     |
          | S16, S18, S21, S22, S24, S25, S26                          |
          |------------------------------------------------------------|
          | S27, S30, S32, S33, S38, S46, S48, S82, S86, S91, S92, S95 |
          |------------------------------------------------------------|
          |      Note: See MHI help file for complete information.     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                   UNIDENTIFIED COMMANDS                    |
          |------------------------------------------------------------|
          |          Command           |            Default            |
          |----------------------------+-------------------------------|
          |            S23             |               7               |
          |----------------------------+-------------------------------|
          |            S28             |         Unidentified          |
          |----------------------------+-------------------------------|
          |            S36             |         Unidentified          |
          |----------------------------+-------------------------------|
          |            S39             |         Unidentified          |
          |----------------------------+-------------------------------|
          |            S40             |         Unidentified          |
          |----------------------------+-------------------------------|
          |            S41             |         Unidentified          |
          +------------------------------------------------------------+
       
                            Proprietary AT Command Set
       
          +------------------------------------------------------------+
          |                            DIAL                            |
          |------------------------------------------------------------|
          | Type:        | Immediate                                   |
          |--------------+---------------------------------------------|
          | Format:      | AT [cmds] D<#>;[cmds]                       |
          |--------------+---------------------------------------------|
          | Description: | Dials the telephone number indicated        |
          |              | according to any modifiers included in the  |
          |              | string.                                     |
          |--------------+---------------------------------------------|
          |   Command    |                  Function                   |
          |--------------+---------------------------------------------|
          |      DL      | Re-dial last number.                        |
          |--------------+---------------------------------------------|
          |      DP      | Pulse dialing enabled.                      |
          |--------------+---------------------------------------------|
          |     DS=n     | Dial stored telephone number n.             |
          |--------------+---------------------------------------------|
          |      DT      | Tone dialing enabled.                       |
          |--------------+---------------------------------------------|
          |      DW      | Dialing resumed following dial tone         |
          |              | detection.                                  |
          |--------------+---------------------------------------------|
          |      D,      | Dialing paused for amount of time specified |
          |              | in S8 register.                             |
          |--------------+---------------------------------------------|
          |      D!      | Flash function initiated. Modem commanded   |
          |              | to go off-hook for specified time before    |
          |              | returning on-hook.                          |
          |--------------+---------------------------------------------|
          |      D@      | Wait for Quiet Answer function enabled.     |
          |              | Modem waits until a "quiet answer," a       |
          |              | ring-back signal followed by silence up to  |
          |              | the time specified in S7, is received prior |
          |              | to executing the rest of the dial string.   |
          |--------------+---------------------------------------------|
          |      D^      | Disable calling tone for this call.         |
          |--------------+---------------------------------------------|
          |      D;      | Modem returned to idle state after dialing. |
          |              | The semicolon can only be placed at the end |
          |              | of the dial command.                        |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    DISPLAY INFORMATION                     |
          |------------------------------------------------------------|
          | Type:        | Immediate                                   |
          |--------------+---------------------------------------------|
          | Format:      | AT [cmds] In [cmds]                         |
          |--------------+---------------------------------------------|
          | Description: | Displays information requested about the    |
          |              | modem.                                      |
          |--------------+---------------------------------------------|
          |   Command    |                  Function                   |
          |--------------+---------------------------------------------|
          |      I0      | Displays product identification code.       |
          |--------------+---------------------------------------------|
          |      I1      | Displays ROM checksum.                      |
          |--------------+---------------------------------------------|
          |      I2      | Tests and displays ROM checksum result.     |
          |--------------+---------------------------------------------|
          |      I3      | Displays firmware revision.                 |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                         LINE SPEED                         |
          |------------------------------------------------------------|
          | Type:        | Register                                    |
          |--------------+---------------------------------------------|
          | Format       | AT [cmds] S37=n [cmds]                      |
          |--------------+---------------------------------------------|
          | Description: | Sets the maximum connect speed attempted    |
          |              | during handshake process.                   |
          |--------------+---------------------------------------------|
          |   Command    |                  Function                   |
          |--------------+---------------------------------------------|
          |   í S37=0    | Auto-detect the highest common connect      |
          |              | speed.                                      |
          |--------------+---------------------------------------------|
          |    S37=1     | Attempt to connect at 300bps.               |
          |--------------+---------------------------------------------|
          |    S37=2     | Attempt to connect at 300bps.               |
          |--------------+---------------------------------------------|
          |    S37=3     | Attempt to connect at 300bps.               |
          |--------------+---------------------------------------------|
          |    S37=5     | Attempt to connect at 1200bps.              |
          |--------------+---------------------------------------------|
          |    S37=6     | Attempt to connect at 2400bps.              |
          |--------------+---------------------------------------------|
          |    S37=7     | Attempt to connect with V.23 at 1200/75bps. |
          |--------------+---------------------------------------------|
          |    S37=8     | Attempt to connect at 4800bps.              |
          |--------------+---------------------------------------------|
          |    S37=9     | Attempt to connect at 9600bps.              |
          |--------------+---------------------------------------------|
          |    S37=10    | Attempt to connect at 12Kbps.               |
          |--------------+---------------------------------------------|
          |    S37=11    | Attempt to connect at 14.4Kbps.             |
          |--------------+---------------------------------------------|
          |    S37=12    | Attempt to connect at 7200bps.              |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                       PROTOCOL/SPEED                       |
          |------------------------------------------------------------|
          | Type:        | Configuration                               |
          |--------------+---------------------------------------------|
          | Format:      | AT [cmds] Fn [cmds]                         |
          |--------------+---------------------------------------------|
          | Description: | Selects the protocol and speed the modem    |
          |              | will attempt to connect at.                 |
          |--------------+---------------------------------------------|
          |   Command    |                  Function                   |
          |--------------+---------------------------------------------|
          |     í F0     | Auto-detect the highest common connect      |
          |              | speed.                                      |
          |--------------+---------------------------------------------|
          |      F1      | Select V.22 or Bell 212A at 1200bps speed.  |
          |--------------+---------------------------------------------|
          |      F3      | Select V.23 at 75/1200bps speed.            |
          |--------------+---------------------------------------------|
          |      F4      | Select V.22bis at 2400bps speed.            |
          |--------------+---------------------------------------------|
          |      F6      | Select V.32 or V.32bis at 4800bps speed.    |
          |--------------+---------------------------------------------|
          |      F7      | Select V.32bis at 7200bps speed.            |
          |--------------+---------------------------------------------|
          |      F8      | Select V.32bis or V.32 at 9600bps speed.    |
          |--------------+---------------------------------------------|
          |      F9      | Select V.32bis at 12Kbps speed.             |
          |--------------+---------------------------------------------|
          |     F10      | Select V.32bis at 14.4Kbps speed.           |
          +------------------------------------------------------------+