(TXT) View Source
# ACTIONTEC ELECTRONICS, INC
COMNET 144
Card Type Fax, Modem (synchronous/asynchronous),
Network Interface Card
Chip Set Unidentified
I/O Options Ethernet 10BaseT connector
NIC Type Ethernet
Network Transfer Rate 10Mbps
Maximum Modem Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Bus PCMCIA Type II
Fax Class Class I & II
Data Modulation Bell 103A/212A
Protocol
ITU-T V.21, V.22, V.22bis, V.23, V.32,
V.32bis
Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29
Protocol
Error MNP5, V.42, V.42bis
Correction/Compression
Topology Star
Wiring Type Unshielded twisted pair
Boot ROM Not available
V2291
+------------------------------------------------------------+
| SUPPORTED COMMAND SET |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| AT, ‘Comma’, A/ |
|------------------------------------------------------------|
| A, B, C, E, F, H, L, M, N, O, Q, S, V, W, X, Z |
|------------------------------------------------------------|
| &C, &D, &F, &T, &V, &W, &X, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B, \G, \J, \K, \L, |
|------------------------------------------------------------|
| %C, %E, %L, %Q, %TT |
|------------------------------------------------------------|
| S Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S14, S16, S18, S21, S22, S23, S24, S25 |
|------------------------------------------------------------|
| S26, S27, S28, S29, S30, S31, S32, S33, S36, S37, S39, |
| S40, S41, S46, S48, S82, S86, S91, S92 |
|------------------------------------------------------------|
| S95, S99 |
|------------------------------------------------------------|
| Special Commands |
|------------------------------------------------------------|
| *H, -K, -Q, )M, |
|------------------------------------------------------------|
| Note: See MHI Help file for full command documentation. |
+------------------------------------------------------------+
Proprietary AT Command Set