(TXT) View Source
# 3COM CORPORATION
COURIER DUAL STANDARD V.34 FAX (EXTERNAL)
Card Type Fax, Modem (synchronous/asynchronous)
Chip Set U.S. Robotics
Maximum Data Rate 28.8Kbps
Maximum Fax Rate 14.4Kbps
Data Bus External
Fax Class Class I & II
Data Modulation Bell 103/212A
Protocol
ITU-T V.21, V.22, V.22bis, V.23,
V.25bis, V.32, V.32bis, V.34
Rockwell V.FC
U.S. Robotics HST, V.32terbo
Fax Modulation ITU-T V.17, V.21, V.27ter, V.29
Protocol
Error HST, MNP5, V.42, V.42bis
Correction/Compression
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| RS-232/422 | CN1 | DC power | CN4 |
|----------------------+----------+-------------------+------|
| Line out | CN2 | Voice/Data switch | SW2 |
|----------------------+----------+-------------------+------|
| Line in | CN3 | Power switch | SW3 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-----------------------------------------+-------+----------|
| í DTR normal | SW1/A | Off |
|-----------------------------------------+-------+----------|
| DTR forced high | SW1/A | On |
|-----------------------------------------+-------+----------|
| í Verbose (word) format enabled | SW1/B | Off |
|-----------------------------------------+-------+----------|
| Numeric format enabled | SW1/B | On |
|-----------------------------------------+-------+----------|
| í Result code display enabled | SW1/C | On |
|-----------------------------------------+-------+----------|
| Result code display disabled | SW1/C | Off |
|-----------------------------------------+-------+----------|
| í Local echo enabled | SW1/D | Off |
|-----------------------------------------+-------+----------|
| Local echo disabled | SW1/D | On |
|-----------------------------------------+-------+----------|
| í Auto-answer disabled | SW1/E | On |
|-----------------------------------------+-------+----------|
| Auto-answer enabled, off-hook on first | SW1/E | Off |
| ring | | |
|-----------------------------------------+-------+----------|
| í CD normal | SW1/F | Off |
|-----------------------------------------+-------+----------|
| CD forced high | SW1/F | On |
|-----------------------------------------+-------+----------|
| í Result code display enabled in both | SW1/G | Off |
| originate and answer mode | | |
|-----------------------------------------+-------+----------|
| Result code display enabled in | SW1/G | On |
| originate mode only | | |
|-----------------------------------------+-------+----------|
| í Smart mode | SW1/H | On |
|-----------------------------------------+-------+----------|
| Dumb mode | SW1/H | Off |
|-----------------------------------------+-------+----------|
| í Escape code response: modem goes | SW1/I | Off |
| on-hook, off-line command mode, returns | | |
| ‘NO CARRIER’ | | |
|-----------------------------------------+-------+----------|
| Escape code response: modem stays | SW1/I | On |
| on-line, on-line command mode, returns | | |
| ‘OK’ | | |
|-----------------------------------------+-------+----------|
| í Reset and load from profiles in NVRAM | SW1/J | Off |
|-----------------------------------------+-------+----------|
| Reset and load from factory settings in | SW1/J | On |
| ROM | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|---------+-------+----------+-------------------------------|
| HS | Red | On | Modem is operating at 2400bps |
| | | | or faster |
|---------+-------+----------+-------------------------------|
| HS | Red | Off | Modem is operating at slower |
| | | | than 2400bps |
|---------+-------+----------+-------------------------------|
| AA | Red | On | Auto-answer enabled |
|---------+-------+----------+-------------------------------|
| AA | Red | Off | Auto-answer disabled |
|---------+-------+----------+-------------------------------|
| AA | Red | Blinking | Phone is ringing |
|---------+-------+----------+-------------------------------|
| CD | Red | On | Carrier signal detected |
|---------+-------+----------+-------------------------------|
| CD | Red | Off | Carrier signal not detected |
|---------+-------+----------+-------------------------------|
| OH | Red | On | Modem is off-hook |
|---------+-------+----------+-------------------------------|
| OH | Red | Off | Modem is on-hook |
|---------+-------+----------+-------------------------------|
| RD | Red | On | Modem is receiving data |
|---------+-------+----------+-------------------------------|
| RD | Red | Off | Modem is not receiving data |
|---------+-------+----------+-------------------------------|
| SD | Red | On | Modem is transmitting data |
|---------+-------+----------+-------------------------------|
| SD | Red | Off | Modem is not transmitting |
| | | | data |
|---------+-------+----------+-------------------------------|
| TR | Red | On | DTR signal is high |
|---------+-------+----------+-------------------------------|
| TR | Red | Off | DTR signal is low |
|---------+-------+----------+-------------------------------|
| MR | Red | On | Power is on |
|---------+-------+----------+-------------------------------|
| MR | Red | Off | Power is off |
|---------+-------+----------+-------------------------------|
| RS | Red | On | Modem sends RTS signal |
|---------+-------+----------+-------------------------------|
| RS | Red | Off | RTS forced low during receive |
| | | | data hardware flow control |
|---------+-------+----------+-------------------------------|
| CS | Red | On | Synchronous transmission or |
| | | | before CTS forced low during |
| | | | transmit hardware flow |
| | | | control |
|---------+-------+----------+-------------------------------|
| CS | Red | Off | Modem doesn’t send CTS to |
| | | | remote |
|---------+-------+----------+-------------------------------|
| SYN | Red | On | Modem in synchronous mode |
|---------+-------+----------+-------------------------------|
| SYN | Red | Off | Modem not in synchronous mode |
|---------+-------+----------+-------------------------------|
| SYN | Red | Blinking | Dial security enabled |
|---------+-------+----------+-------------------------------|
| ARQ/FAX | Red | On | Modem is connected in ARQ |
| | | | mode |
|---------+-------+----------+-------------------------------|
| ARQ/FAX | Red | Off | Modem is not connected in ARQ |
| | | | mode |
|---------+-------+----------+-------------------------------|
| ARQ/FAX | Red | Slow | Data being retransmitted |
| | | blink | |
|---------+-------+----------+-------------------------------|
| ARQ/FAX | Red | Fast | Modem is connected in FAX |
| | | blink | mode |
+------------------------------------------------------------+
Proprietary AT Command Set
See document V2007 for a full command summary.