(TXT) View Source
# 3COM CORPORATION
US ROBOTICS 1200PC
Modem Type Data (synchronous/asynchronous)
Maximum Data Rate 1200bps
Data Bus 8-bit ISA
Data Modulation Protocol Bell 103A/212A
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|-------------------+----------+------------------+----------|
| Line out | CN1 | Volume | SW2 |
|-------------------+----------+------------------+----------|
| Line in | CN2 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DTR SIGNAL |
|------------------------------------------------------------|
| Setting | SW1/1 |
|-------------------------------+----------------------------|
| » DTR forced high | On |
|-------------------------------+----------------------------|
| DTR normal | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESULT CODES |
|------------------------------------------------------------|
| Setting | SW1/2 |
|--------------------------------+---------------------------|
| » Verbose result codes enabled | Off |
|--------------------------------+---------------------------|
| Numeric result codes enabled | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESULT CODES DISPLAY |
|------------------------------------------------------------|
| Setting | SW1/3 |
|-------------------------------+----------------------------|
| » Display enabled | On |
|-------------------------------+----------------------------|
| Display disabled | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ECHO COMMANDS DISPLAY |
|------------------------------------------------------------|
| Setting | SW1/4 |
|-------------------------------+----------------------------|
| » Local echo enabled | Off |
|-------------------------------+----------------------------|
| Local echo disabled | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AUTO ANSWER |
|------------------------------------------------------------|
| Setting | SW1/5 |
|---------------------------------------+--------------------|
| » Modem does not answer on first ring | On |
|---------------------------------------+--------------------|
| Modem answers on first ring | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CARRIER DETECT |
|------------------------------------------------------------|
| Setting | SW1/6 |
|-------------------------------+----------------------------|
| » CD normal | Off |
|-------------------------------+----------------------------|
| CD forced high | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MULTLINE INSTALLATION |
|------------------------------------------------------------|
| Setting | SW1/7 |
|-------------------------------+----------------------------|
| » Single phone connected | Off |
|-------------------------------+----------------------------|
| Multiple phones connected | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AT COMMAND SET |
|------------------------------------------------------------|
| Setting | SW1/8 |
|-------------------------------+----------------------------|
| » AT command set recognized | On |
|-------------------------------+----------------------------|
| AT command set disabled | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COM PORT CONFIGURATION |
|------------------------------------------------------------|
| Port | J1 | J2 |
|------------------+--------------------+--------------------|
| COM1: (3F8h) | Pins 1 & 2 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| COM2: (3E8h) | Pins 2 & 3 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| COM3: (2F8h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
|------------------+--------------------+--------------------|
| COM4: (2E8h) | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | J3 |
|----------------------------+-------------------------------|
| 3 | Pins 3 & 5 closed |
|----------------------------+-------------------------------|
| 4 | Pins 1 & 3 closed |
|----------------------------+-------------------------------|
| 5 | Pins 2 & 4 closed |
|----------------------------+-------------------------------|
| 7 | Pins 4 & 6 closed |
|----------------------------+-------------------------------|
| Disabled | Open |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| ANALOG LOOPBACK SELF TEST |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S16=n [cmds] |
|--------------+---------------------------------------------|
| Example: | ATS16=139<CR> |
|--------------+---------------------------------------------|
| Description: | Selects the tone dialing test. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| 0 | Data mode. |
|--------------+---------------------------------------------|
| 1 | Analog loopback. |
|--------------+---------------------------------------------|
| 2 | Dial testing. |
|--------------+---------------------------------------------|
| 4 | Test pattern. |
|--------------+---------------------------------------------|
| 5 | Analog loopback and test pattern. |
+------------------------------------------------------------+