(TXT) View Source
# 3COM CORPORATION
US ROBOTICS 2400
Modem Type Data (synchronous/asynchronous)
Maximum Data Rate 2400bps
Data Bus External
Fax Class Class I & II
Data Modulation Protocol Bell 103A/212A
ITU-T V.22bis
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|------------------+----------+-------------------+----------|
| Line out | CN1 | Power in | CN4 |
|------------------+----------+-------------------+----------|
| Line in | CN2 | Volume | R1 |
|------------------+----------+-------------------+----------|
| RS-232/422 | CN3 | Power switch | SW2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+-------+----------+----------------------------------|
| LED1 | Red | On | Analog loopback self test mode |
|------+-------+----------+----------------------------------|
| LED1 | Green | On | Data mode |
|------+-------+----------+----------------------------------|
| LED2 | Red | Blinking | Modem is transmitting/receiving |
| | | | data |
|------+-------+----------+----------------------------------|
| LED2 | Green | On | Carrier signal detected |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DTR SIGNAL |
|------------------------------------------------------------|
| Setting | SW1/1 |
|----------------------------+-------------------------------|
| » On | DTR forced high |
|----------------------------+-------------------------------|
| Off | DTR normal |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESULT CODES |
|------------------------------------------------------------|
| Setting | SW1/2 |
|---------------------------+--------------------------------|
| » Off | Extended result codes enabled |
|---------------------------+--------------------------------|
| On | Extended result codes disabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESULT CODES DISPLAY |
|------------------------------------------------------------|
| Setting | SW1/3 |
|----------------------------+-------------------------------|
| » On | Display disabled |
|----------------------------+-------------------------------|
| Off | Display enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ECHO DISPLAY |
|------------------------------------------------------------|
| Setting | SW1/4 |
|----------------------------+-------------------------------|
| » Off | Local echo enabled |
|----------------------------+-------------------------------|
| On | Local echo disabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AUTO ANSWER |
|------------------------------------------------------------|
| Setting | SW1/5 |
|-----------------------+------------------------------------|
| » On | Modem doe not answer on first ring |
|-----------------------+------------------------------------|
| Off | Modem answers on first ring |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CARRIER DETECT |
|------------------------------------------------------------|
| Setting | SW1/6 |
|----------------------------+-------------------------------|
| » Off | CD normal |
|----------------------------+-------------------------------|
| On | CD forced high |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MULTIPLE PHONE INSTALLATION |
|------------------------------------------------------------|
| Setting | SW1/7 |
|----------------------------+-------------------------------|
| » Off | Single phone connected |
|----------------------------+-------------------------------|
| On | Multiple phones connected |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AT COMMAND SET |
|------------------------------------------------------------|
| Setting | SW1/8 |
|----------------------------+-------------------------------|
| » On | AT command set recognized |
|----------------------------+-------------------------------|
| Off | AT command set disabled |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| TIME DISPLAY |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Kn [cmds] |
|--------------+---------------------------------------------|
| Example: | AT K1 *L2 #E1<CR> |
|--------------+---------------------------------------------|
| Description: | Displays the current call time or clock |
| | time. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| K0 | Display length of last call. |
|--------------+---------------------------------------------|
| K1 | Display actual time. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| HELP SCREENS |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT <prefix>$ |
|--------------+---------------------------------------------|
| Example: | AT &$<CR> |
|--------------+---------------------------------------------|
| Description: | Shows command help screens for all commands |
| | beginning with the given prefix, or no |
| | prefix if none is given. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| $ | Shows ATx help screen. |
|--------------+---------------------------------------------|
| D$ | Shows ATDx help screen. |
|--------------+---------------------------------------------|
| S$ | Shows S-register help screen. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REPEAT COMMAND STRING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] > |
|--------------+---------------------------------------------|
| Example: | AT DT1(303) 443-3388 > <CR> |
|--------------+---------------------------------------------|
| Description: | Causes modem to repeat command string until |
| | a keyboard key is pressed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ANALOG LOOPBACK SELF TEST |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S16=n [cmds] |
|--------------+---------------------------------------------|
| Example: | ATS16=139<CR> |
|--------------+---------------------------------------------|
| Description: | Selects the tone dialing test. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| 0 | Data mode. |
|--------------+---------------------------------------------|
| 1 | Analog loopback. |
|--------------+---------------------------------------------|
| 2 | Dial testing. |
|--------------+---------------------------------------------|
| 4 | Test pattern. |
|--------------+---------------------------------------------|
| 5 | Analog loopback and test pattern. |
+------------------------------------------------------------+