(TXT) View Source
# SEAGATE TECHNOLOGY, INC.
SIDEWINDER 200 EXTERNAL
Device Type External Tape Drive
Interface SCSI-2 Fast/Wide
Format AIT-1
Sustained Transfer Rate 3MBPS (Native), 6 to 9GB (Compressed)
Size 5.25 in. half height
View Bottom
(IMG) IMG 1
+------------------------------------------------------------+
| DRIVE SELECT ID |
|------------------------------------------------------------|
| Note:To select the SCSI ID, press SW1 until the ID you |
| desire is shown in the switch viewer. The address is shown |
| in hexadecimal. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| » | Parity check enabled | JP1/1 | Open |
|---+---------------------------------+-------+--------------|
| | Parity check disabled | JP1/1 | Closed |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | JP1/2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/1 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/3 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/4 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Data compression enabled | SW2/7 | On |
|---+---------------------------------+-------+--------------|
| | Data compression disabled | SW2/7 | Off |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/8 | On |
| | alter | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MANUFACTURERS RECOMMENDED MEDIA |
|------------------------------------------------------------|
| Tape | Capacity Without | Capacity With |
| | Compression | Compression |
|-------+--------------------------+-------------------------|
| AIT-1 | 100GB | 200+ GB |
+------------------------------------------------------------+
(IMG) IMG 2
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+--------------+----------+---------------------------|
| LED1 | Unidentified | On | Unit power is on |
|------+--------------+----------+---------------------------|
| LED1 | Unidentified | Off | Unit power is off |
|------+--------------+----------+---------------------------|
| LED2 | Green | On | SCSI interface is ready |
| | | | for data transfer |
|------+--------------+----------+---------------------------|
| LED2 | Green | Off | Drive is not in use |
|------+--------------+----------+---------------------------|
| LED2 | Green | Blinking | Drive is either searching |
| | | | for data, reading/writing |
| | | | to tape, or rewinding the |
| | | | tape |
|------+--------------+----------+---------------------------|
| LED3 | Green | On | Cartridge is loaded into |
| | | | drive |
|------+--------------+----------+---------------------------|
| LED3 | Green | Blinking | Cartridge is unloaded |
| | | | from drive |
+------------------------------------------------------------+