(TXT) View Source
# CONNER PERIPHERALS, INC.
C250MQ (VER. 1)
Device Type Internal Tape Drive
Interface Floppy
Format QIC DC-2000
Sustained Transfer Rate Unidentified
Size 3.5 in. third height
View Top
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|--------------------+--------+---------------------+--------|
| 24-pin interface | CN1 | Mini DC Power | CN2 |
| connector (from | | connector - floppy | |
| adapter) | | format (from | |
| | | adapter) | |
|------------------------------------------------------------|
| Note: An adapter board with a 4-pin power connector, and a |
| 34 pin card-edge floppy interface connector is included |
| with the drive (see diagram). The only reasons to remove |
| the card are: |
| |
| a) Drive will not fit into case with adapter board |
| installed. |
| |
| b) Only interface connectors available on data cable |
| are header connectors. |
| |
| c) Only power connector available is mini floppy |
| format. |
| |
| d) Jumper settings must be altered. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| » | Termination disabled | JP2 | Open |
|---+---------------------------------+-------+--------------|
| | Termination enabled | JP2 | Closed |
|---+---------------------------------+-------+--------------|
| » | Header read automatic enabled | JP3 | Closed |
|---+---------------------------------+-------+--------------|
| | Header read automatic disabled | JP3 | Open |
| | (UNIX/XENIX) | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | JP4 | Unidentified |
| | alter. | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRIVE SELECT |
|------------------------------------------------------------|
| Setting | JP6 |
|-------------------------------------+----------------------|
| » | Factory drive select | Pins 1 - 5 open |
|---+---------------------------------+----------------------|
| | Drive one in two drive system | Pins 1 & 2 closed |
|---+---------------------------------+----------------------|
| | Drive two in two drive system | Pins 2 & 3 closed |
|---+---------------------------------+----------------------|
| | Drive two in two drive system | Pins 3 & 4 closed |
|---+---------------------------------+----------------------|
| | Drive three in two drive system | Pins 4 & 5 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MANUFACTURERS RECOMMENED MEDIA |
|------------------------------------------------------------|
| Tape | Capacity |
|------------------------------+-----------------------------|
| Sony QDC2080; | 83MB |
| | |
| 3M DC2080 | |
|------------------------------+-----------------------------|
| Sony QDC2080 (QIC-80); | 83MB |
| | |
| 3M DC2080 XIMAT | |
|------------------------------+-----------------------------|
| Sony QDC2120; | 124MB |
| | |
| 3M DC2120 | |
|------------------------------+-----------------------------|
| Conner 250QT; | 124MB |
| | |
| Sony QDC2120 (QIC-80); | |
| | |
| 3M DC2120 XIMAT | |
+------------------------------------------------------------+
(IMG) IMG 2
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-------+---------------+--------+---------------------------|
| LED1 | Unidentified | On | Drive is active |
|-------+---------------+--------+---------------------------|
| LED1 | Unidentified | Off | Drive is not active |
|------------------------------------------------------------|
| Note: Do not remove media while drive is active. Wait |
| until LED1 is off before ejecting tape. |
+------------------------------------------------------------+