(TXT) View Source
# MADGE NETWORKS, LTD.
SMART 16/4 CLIENT RINGNODE
NIC Type Token Ring
Transfer Rate 4/16Mbps
Data Bus 16-bit ISA
Topology Ring
Wiring Type Shielded/Unshielded twisted pair
Boot ROM Available
(IMG) IMG 1
+------------------------------------------------------------+
| BOOT ROM |
|------------------------------------------------------------|
| Setting | SW2/3 |
|---------------------------------+--------------------------|
| » | Disabled | Off |
|---+-----------------------------+--------------------------|
| | Enabled | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPATIBILITY MODE |
|------------------------------------------------------------|
| Setting | SW2/6 |
|---------------------------------------------+--------------|
| » | Normal ISA bus timing | On |
|----------+----------------------------------+--------------|
| | Alternate ISA bus timing | Off |
|------------------------------------------------------------|
| Note:Alternate ISA bus timing is used if the host |
| computer is not 100% ISA bus compatible (such as the IBM |
| PS/2 model 30-286) or if the Madge Ringnode diagnostics |
| program fails to locate the NIC. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DMA CHANNEL BUS |
|------------------------------------------------------------|
| Setting | SW2/7 |
|-----------------------------------------------+------------|
| » | Asynchronous bus (uses host | Off |
| | system’s clock) | |
|---------+-------------------------------------+------------|
| | Synchronous bus (uses NIC on-board | On |
| | clock) | |
|------------------------------------------------------------|
| Note:The synchronous bus speed is used for systems that |
| have a clock speed less than 10MHz. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXPANSION SLOT SIZE |
|------------------------------------------------------------|
| Slot Size | SW2/5 |
|------------------------------------------+-----------------|
| » | Automatic select | On |
|------------+-----------------------------+-----------------|
| | Forced 8-bit mode | Off |
|------------------------------------------------------------|
| Note:If an 8-bit transfer mode is required and the NIC |
| is installed in a 16-bit slot, use forced 8-bit mode. If |
| the NIC is to be used in a Novell Netware 386 file |
| server, automatic select must be used. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT REQUEST |
|------------------------------------------------------------|
| IRQ | SW1 |
|----------------------------+-------------------------------|
| » | 3 | Position 7 |
|---+------------------------+-------------------------------|
| | 2/9 | Position 8 |
|---+------------------------+-------------------------------|
| | 5 | Position 6 |
|---+------------------------+-------------------------------|
| | 7 | Position 5 |
|---+------------------------+-------------------------------|
| | 10 | Position 4 |
|---+------------------------+-------------------------------|
| | 11 | Position 3 |
|---+------------------------+-------------------------------|
| | 12 | Position 2 |
|---+------------------------+-------------------------------|
| | 15 | Position 1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| NETWORK SPEED |
|------------------------------------------------------------|
| Speed | SW2/7 |
|---------------------------------------+--------------------|
| » | 16Mbps | Off |
|----------------+----------------------+--------------------|
| | 4Mbps | On |
|------------------------------------------------------------|
| Note:All cards on a segment must have this option set the |
| same. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE I/O AND BOOT ROM ADDRESS |
|------------------------------------------------------------|
| Address | Boot ROM Address | SW2/1 | SW2/2 |
|-------------------+------------------+----------+----------|
| » | 0A20-0A2Fh | CC000-CDFFFh | On | On |
|---+---------------+------------------+----------+----------|
| | 1A20-1A2Fh | DC000-DDFFFh | Off | On |
|---+---------------+------------------+----------+----------|
| | 2A20-2A2Fh | CE000-CFFFFh | On | Off |
|---+---------------+------------------+----------+----------|
| | 3A20-3A2Fh | DE000-DFFFFh | Off | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CABLE TYPE |
|------------------------------------------------------------|
| Type | LB1 |
|----------------------------------------+-------------------|
| Shielded twisted pair (DB-9 connector) | STP |
|----------------------------------------+-------------------|
| Unshielded twisted pair (RJ-45 jack) | UTP |
+------------------------------------------------------------+