(TXT) View Source
# IBM CORPORATION
PC NETWORK ADAPTER II (BROADBAND)
NIC Type Broadband
Transfer Rate Unidentified
Data Bus 8-bit ISA
Topology Star
Wiring Type RG-11/U
RG-59A/U coaxial
Boot ROM Not Available
(IMG) IMG 1
+------------------------------------------------------------+
| INTERRUPT REQUEST SELECTION |
|------------------------------------------------------------|
| IRQ | JP1 |
|----------------------------+-------------------------------|
| » | 2 | Pins 1 & 2 closed |
|----+-----------------------+-------------------------------|
| | 3 | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| I/O ADDRESS SELECTION |
|------------------------------------------------------------|
| Address | JP4 |
|----------------------------+-------------------------------|
| » | 620h | Pins 1 & 2 closed |
|---+------------------------+-------------------------------|
| | 628H | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE MEMORY ADDRESS SELECTION |
|------------------------------------------------------------|
| Address | JP5 |
|----------------------------+-------------------------------|
| » | CC00h | Pins 1 & 2 closed |
|---+------------------------+-------------------------------|
| | DC00h | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ROM BIOS CONFIGURATION |
|------------------------------------------------------------|
| » Setting | JP7 |
|----------------------------+-------------------------------|
| » | Disabled | Pins 2 & 3 closed |
|---+------------------------+-------------------------------|
| » | Enabled | Pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BOOT ROM |
|------------------------------------------------------------|
| » Setting | JP6 |
|----------------------------+-------------------------------|
| » | Disabled | Pins 1 & 2 closed |
|---+------------------------+-------------------------------|
| » | Enabled | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| The DMA channel is permanently fixed at 3. If two adapters |
| will be installed into one station then disable the ROM |
| BIOS on the second adapter. |
+------------------------------------------------------------+