(TXT) View Source
# DIGITAL EQUIPMENT CORPORATION
UTP DAS ADAPTER (DEFPA-MB)
Card Type Network Interface Card
NIC Type FDDI
Maximum Onboard Memory Unidentified
Boot ROM Unidentified
Network Transfer Rate 100Mbps
Topology Star
Wiring Type Unshielded twisted pair
Data Bus 32-bit PCI
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| UTP connector (port | CN1 | UTP connector (port | CN2 |
| B) | | A) | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED1 | Green | On | Network connection is good |
| | | | (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Green | Blinking | Network connection in progress |
| | | | (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Green | Off | Network connection is broken |
| | | | (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Red | On | See Note (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Red | Blinking | Illegal topology (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Red | Off | Network connection is broken |
| | | | (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Green | On | Network connection is good |
| | | | (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Green | Blinking | Network connection in progress |
| | | | (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Green | Off | Network connection is broken |
| | | | (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Red | On | See Note (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Red | Blinking | Illegal topology (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Red | Off | Network connection is broken |
| | | | (port B) |
|------------------------------------------------------------|
| Note: If LED1 or LED2 is on after system boots, indicates |
| broken port or Link Confidence Test (LCT) failure; retry |
| loop. If on before system boots, indicates self-test |
| failure. |
+------------------------------------------------------------+