(TXT) View Source
# DIGITAL EQUIPMENT CORPORATION
FIBER-OPTIC DAS CONTROLLER (DEFPA-DA),
FIBER-OPTIC DAS ADAPTER (DEFPA-DB)
Card Type Network Interface Card
NIC Type FDDI
Maximum Onboard Memory Unidentified
Boot ROM Unidentified
Network Transfer Rate 100Mbps
Topology Ring
Wiring Type Fiber optic cable
Unshielded Twisted Pair
Data Bus 32-bit PCI
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|-----------------------+-------+--------------------+-------|
| UTP connector | CN1 | Fiber-optic | CN3 |
| | | connector - duplex | |
| | | SC (port A) | |
|-----------------------+-------+--------------------+-------|
| Fiber-optic connector | CN2 | | |
| - duplex SC (port B) | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+--------+----------+---------------------------------|
| LED1 | Green | On | Network connection is good |
| | | | (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Green | Blinking | Network connection in progress |
| | | | (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Green | Off | Network connection is broken |
| | | | (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Red | On | See Note (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Red | Blinking | Illegal topology (port A) |
|------+--------+----------+---------------------------------|
| LED1 | Red | Off | Network connection is broken |
| | | | (port A) |
|------+--------+----------+---------------------------------|
| LED2 | Green | On | Network connection is good |
| | | | (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Green | Blinking | Network connection in progress |
| | | | (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Green | Off | Network connection is broken |
| | | | (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Red | On | See Note (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Red | Blinking | Illegal topology (port B) |
|------+--------+----------+---------------------------------|
| LED2 | Red | Off | Network connection is broken |
| | | | (port B) |
|------------------------------------------------------------|
| Note: If LED1 or LED2 on after system boots, indicates |
| broken port or Link Confidence Test (LCT) failure; retry |
| loop. If on before system boots, indicates self-test |
| failure. |
+------------------------------------------------------------+