(TXT) View Source
# TEKNOR INDUSTRIAL COMPUTERS, INC.
VIPER 820
Processor Pentium
Processor Speed 75/100/120/133/150/166/200/MHz
Chip Set Intel
Video Chip Set Cirrus Logic
Maximum Onboard 256MB
Memory
Maximum Video 1MB
Memory
Cache 256KB
BIOS Award
Dimensions 181mm x 122mm
I/O Options Floppy drive interface, IDE interface, SCSI
interface, green PC connector, parallel port,
PS/2 mouse interface, serial ports (2), VGA
port, VGA feature connector, flat panel
connector, PC/104 connectors (2)
NPU Options None
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|------------------+----------+-------------------+----------|
| IDE interface | J1 | Flat panel | J9 |
| | | connector | |
|------------------+----------+-------------------+----------|
| Floppy drive | J2 | Serial port 1 | J10 |
| interface | | | |
|------------------+----------+-------------------+----------|
| Keyboard, | J3 | PS/2 mouse | J11 |
| speaker, reset, | | interface | |
| LED | | | |
|------------------+----------+-------------------+----------|
| Serial port 2 | J4 | Power connector | J12 |
|------------------+----------+-------------------+----------|
| SCSI interface | J5 | VGA port | J13 |
|------------------+----------+-------------------+----------|
| Green PC | J6 | Parallel port | J19 |
| connector | | | |
|------------------+----------+-------------------+----------|
| Chassis fan | J7 | PC/104 connectors | P1 & P2 |
| power | | | |
|------------------+----------+-------------------+----------|
| VGA feature | J8 | Regulator | P3 |
| connector | | connector | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|---------------------------------------+-------+------------|
| » | Power fail monitoring disabled | W8 | Open |
|---+-----------------------------------+-------+------------|
| | Power fail monitoring enabled | W8 | Closed |
|---+-----------------------------------+-------+------------|
| » | Power failure detection source | W9 | Pins 1 & 2 |
| | external power fail (pin 6 on | | closed |
| | J12) | | |
|---+-----------------------------------+-------+------------|
| | Power failure detection source | W9 | Pins 2 & 3 |
| | internal/external battery <3v | | closed |
|---+-----------------------------------+-------+------------|
| | Battery type select internal | W10 | Pins 1 & 2 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| | Battery type select external | W10 | Pins 2 & 3 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| » | Flat panel voltage select 5v | W11 | Pins 1 & 2 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| | Flat panel voltage select 3.3v | W11 | Pins 2 & 3 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| » | BIOS boot select normal boot | W18 | Open |
|---+-----------------------------------+-------+------------|
| | BIOS boot select emergency boot | W18 | Closed |
|---+-----------------------------------+-------+------------|
| » | Watchdog timer enabled | W19 | Closed |
|---+-----------------------------------+-------+------------|
| | Watchdog timer disabled | W19 | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SIMM CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 |
|----------------------------+-------------------------------|
| 2MB | (2) 256K x 36 |
|----------------------------+-------------------------------|
| 4MB | (2) 512K x 36 |
|----------------------------+-------------------------------|
| 8MB | (2) 1M x 36 |
|----------------------------+-------------------------------|
| 16MB | (2) 2M x 36 |
|----------------------------+-------------------------------|
| 32MB | (2) 4M x 36 |
|----------------------------+-------------------------------|
| 64MB | (2) 8M x 36 |
|----------------------------+-------------------------------|
| 128MB | (2) 16M x 36 |
|----------------------------+-------------------------------|
| 256MB | (2) 32M x 36 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CACHE CONFIGURATION |
|------------------------------------------------------------|
| Note: 256KB cache is factory installed and is not |
| configurable. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| VIDEO MEMORY CONFIGURATION |
|------------------------------------------------------------|
| Note: 1MB video memory is factory installed and is not |
| configurable. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CPU SPEED SELECTION |
|------------------------------------------------------------|
| CPU |Clock |Multiplier| W2 | W3 | W13 | W14 | W15 |
| speed |speed | | | | | | |
|-------+------+----------+------+------+------+------+------|
| 75MHz |50MHz | 1.5x |Closed|Closed| Open | Open | Open |
|-------+------+----------+------+------+------+------+------|
|100MHz |66MHz | 1.5x | Open |Closed|Closed| Open | Open |
|-------+------+----------+------+------+------+------+------|
|120MHz |60MHz | 2x |Closed| Open | Open |Closed| Open |
|-------+------+----------+------+------+------+------+------|
|133MHz |66MHz | 2x | Open |Closed|Closed|Closed| Open |
|-------+------+----------+------+------+------+------+------|
|150MHz |60MHz | 2.5x |Closed| Open | Open |Closed|Closed|
|-------+------+----------+------+------+------+------+------|
|166MHz |66MHz | 2.5x | Open |Closed|Closed|Closed|Closed|
|-------+------+----------+------+------+------+------+------|
|200MHz |66MHz | 3x | Open |Closed|Closed| Open |Closed|
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 2 TERMINATION SELECTION |
|------------------------------------------------------------|
| Setting | W6 | W7 |
|-------------------------+-----------------+----------------|
| » | Disabled | Open | Open |
|-----+-------------------+-----------------+----------------|
| | Enabled | Closed | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE I/O SELECTION |
|------------------------------------------------------------|
| Address | W16 |
|----------------------------+-------------------------------|
| » | 190H | Pins 1 & 2, 3 & 4 closed |
|---+------------------------+-------------------------------|
| | 290H | Pins 1 & 2 closed |
|---+------------------------+-------------------------------|
| | 390H | Pins 3 & 4 closed |
|---+------------------------+-------------------------------|
| | 390H | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED BIOS MODE SELECTION |
|------------------------------------------------------------|
| Setting | W17 |
|-------------------------------+----------------------------|
| | VT100 | Pins 3 & 4 closed |
|---+---------------------------+----------------------------|
| | Serial download | Pins 1 & 2 closed |
|---+---------------------------+----------------------------|
| » | Standard mode | Pins 3 & 4 closed |
|---+---------------------------+----------------------------|
| » | Normal mode | Pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TERMINATION SELECTION |
|------------------------------------------------------------|
| Setting | W1 |
|----------------------------------+-------------------------|
| » | Hardware configuration | Pins 2 & 3 closed |
|---+------------------------------+-------------------------|
| | Software configuration | Pins 1 & 2 closed |
|---+------------------------------+-------------------------|
| | Disabled | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FEATURE CONNECTOR SELECTION |
|------------------------------------------------------------|
| Setting | W4 | W5 |
|------------------------+-----------------+-----------------|
| » | Disabled | Closed | Open |
|---+--------------------+-----------------+-----------------|
| | Enabled | Open | Closed |
|---+--------------------+-----------------+-----------------|
| | V-port | Open | Open |
+------------------------------------------------------------+