(TXT) View Source
# NEC TECHNOLOGIES, INC.
POWERMATE 386/20
Processor 80386DX
Processor Speed 20MHz
Chip Set ETEQ
Max. Onboard 8MB (on system memory card)
DRAM
Cache None
Dimensions 330.2mm x 218.4mm
BIOS Phoenix
I/O Options Serial ports (2), parallel port, floppy drive
interface, proprietary system memory card,
proprietary external memory card slot (on
system memory card)
NPU Options 80287/80387
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|------------------+----------+-------------------+----------|
| Speaker | P1 | Floppy drive | P7 |
| | | interface | |
|------------------+----------+-------------------+----------|
| External battery | P3 | Serial port 2 | P10 |
|------------------+----------+-------------------+----------|
| Keylock | P4 | Turbo LED | P11 |
|------------------+----------+-------------------+----------|
| Parallel port | P5 | 32-bit external | S1 |
| | | memory card | |
|------------------+----------+-------------------+----------|
| Serial port 1 | P6 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Jumper/Switch | Position |
|-------------------------------+---------------+------------|
| » | Manufacturer test mode | 11L1 | Open |
| | disabled | | |
|---+---------------------------+---------------+------------|
| | Manufacturer test mode | 11L1 | Closed |
| | enabled | | |
|---+---------------------------+---------------+------------|
| » | Pipeline mode enabled | 14L2 | pins 1 & 2 |
| | | | closed |
|---+---------------------------+---------------+------------|
| | Pipeline mode disabled | 14L2 | pins 2 & 3 |
| | | | closed |
|---+---------------------------+---------------+------------|
| » | Test mode disabled | 19A1 | Open |
|---+---------------------------+---------------+------------|
| | Test mode enabled | 19A1 | Closed |
|---+---------------------------+---------------+------------|
| » | Floppy drive type select | 23G1 | pins 1 & 2 |
| | single speed | | closed |
|---+---------------------------+---------------+------------|
| | Floppy drive type select | 23G1 | pins 2 & 3 |
| | dual speed | | closed |
|---+---------------------------+---------------+------------|
| » | Factory configured - do | SW1/1 | Off |
| | not alter | | |
|---+---------------------------+---------------+------------|
| » | Factory configured - do | SW1/2 | Off |
| | not alter | | |
|---+---------------------------+---------------+------------|
| » | Factory configured - do | SW1/3 | Off |
| | not alter | | |
|---+---------------------------+---------------+------------|
| » | Factory configured - do | SW1/4 | On |
| | not alter | | |
|---+---------------------------+---------------+------------|
| » | Test mode switch disabled | SW1/5 | On |
|---+---------------------------+---------------+------------|
| | Test mode switch enabled | SW1/5 | Off |
|---+---------------------------+---------------+------------|
| » | DRAM speed select 0 wait | SW1/6 | On |
| | states | | |
|---+---------------------------+---------------+------------|
| | DRAM speed select 1 wait | SW1/6 | Off |
| | state | | |
|---+---------------------------+---------------+------------|
| » | Factory configured - do | SW1/9 | Off |
| | not alter | | |
|---+---------------------------+---------------+------------|
| » | Factory configured - do | SW1/10 | Off |
| | not alter | | |
|---+---------------------------+---------------+------------|
| » | Monitor type select color | SW2/1 | On |
|---+---------------------------+---------------+------------|
| | Monitor type select | SW2/1 | Off |
| | monochrome | | |
|---+---------------------------+---------------+------------|
| » | Floppy drive interface | SW2/2 | Off |
| | address select primary | | |
|---+---------------------------+---------------+------------|
| | Floppy drive interface | SW2/2 | On |
| | address select secondary | | |
|---+---------------------------+---------------+------------|
| » | Floppy drive interface | SW2/3 | On |
| | enabled | | |
|---+---------------------------+---------------+------------|
| | Floppy drive interface | SW2/3 | Off |
| | disabled | | |
|---+---------------------------+---------------+------------|
| » | Serial port 2 select COM2 | SW2/4 | On |
|---+---------------------------+---------------+------------|
| | Serial port 2 disabled | SW2/4 | Off |
|---+---------------------------+---------------+------------|
| » | Serial port 1 select COM1 | SW2/5 | On |
|---+---------------------------+---------------+------------|
| | Serial port 1 disabled | SW2/5 | Off |
|---+---------------------------+---------------+------------|
| » | System enabled | SW2/6 | On |
|---+---------------------------+---------------+------------|
| | System disabled | SW2/6 | Off |
|---+---------------------------+---------------+------------|
| » | NPU enabled | SW2/7 | On |
|---+---------------------------+---------------+------------|
| | NPU disabled | SW2/7 | Off |
|---+---------------------------+---------------+------------|
| » | NPU type select 80287 | SW2/8 | Off |
|---+---------------------------+---------------+------------|
| | NPU type select 80387 | SW2/8 | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| NPU CONFIGURATION (80287) |
|------------------------------------------------------------|
| Speed | 19C1 | 19C2 | 19C3 (27F1) |
|---------------+-----------------+------------+-------------|
| | 5.3MHz | pins 2 & 3 | pins 2 & 3 | pins 2 & 3 |
| | | closed | closed | closed |
|----+----------+-----------------+------------+-------------|
| | 8MHz | pins 1 & 2 | pins 1 & 2 | pins 2 & 3 |
| | | closed | closed | closed |
|----+----------+-----------------+------------+-------------|
| » | 10MHz | pins 1 & 2 | pins 1 & 2 | pins 1 & 2 |
| | | closed | closed | closed |
|------------------------------------------------------------|
| Note:Depending on the revision # of the mainboad, the |
| board will have either jumper 19C3 or 27F1. |
+------------------------------------------------------------+
(IMG) IMG 2
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location |
|------------------------------------------+-----------------|
| Proprietary external memory card | S1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 | P-0 |
|------------------+--------------------+--------------------|
| 2MB | (16) 44256 | (8) 41256 |
|------------------------------------------------------------|
| Note:The locations of Bank 0 and P-0 are unidentifed. |
+------------------------------------------------------------+
(IMG) IMG 3
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location |
|------------------------------------------+-----------------|
| Proprietary external memory card | S1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 |
|----------------------------+-------------------------------|
| 8MB | (72) 44256 |
+------------------------------------------------------------+