(TXT) View Source
# ICL
ERGOPRO D4/33 XG, D4/33 XGI, D4/66 DXG, D4/66 DXGI
Processor 80486SX/80487SX/80486DX2
Processor 33/66(internal)MHz
Speed
Chip Set Headland
Max. Onboard 32MB
DRAM
Cache 128KB
BIOS ICL
Dimensions 432mm x 368mm
I/O Options Microphone port, headphone port, VGA port, PS/2
port, SCSI port, AUI port, 10 base T port, VGA
feature connector, serial/parallel connector,
floppy drive interfaces (2), SCSI interface, CD
audio connector, riser slot
NPU Options None
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|---------------------+----------+----------------+----------|
| Microphone port | CN1 | Floppy drive | CN11 |
| | | interface | |
|---------------------+----------+----------------+----------|
| Headphone port | CN2 | Floppy drive | CN12 |
| | | interface | |
|---------------------+----------+----------------+----------|
| VGA port | CN3 | SCSI interface | CN13 |
|---------------------+----------+----------------+----------|
| PS/2 mouse port | CN4 | Chassis fan | J1 |
| | | power | |
|---------------------+----------+----------------+----------|
| SCSI port | CN5 | Speaker | J2 |
|---------------------+----------+----------------+----------|
| AUI port | CN6 | Chassis fan | J3 |
| | | power | |
|---------------------+----------+----------------+----------|
| 10 base T port | CN7 | Front panel | J4 |
| | | connector | |
|---------------------+----------+----------------+----------|
| VGA feature | CN8 | CD audio | T9 |
| connector | | connector | |
|---------------------+----------+----------------+----------|
| Serial/parallel | CN9 | Reset switch | T29 |
| connector | | | |
|---------------------+----------+----------------+----------|
| Cache connector | CN10 | Riser Card | SL1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Jumper | Position |
|--------------------------------------+--------+------------|
| | Factory configured - do not | CN14 | N/A |
| | alter | | |
|---+----------------------------------+--------+------------|
| » | On board VGA enabled | T12 | Open |
|---+----------------------------------+--------+------------|
| | On board VGA disabled | T12 | pins 2 & 3 |
| | | | closed |
|---+----------------------------------+--------+------------|
| » | System lock disabled | T14 | pins 1 & 2 |
| | | | closed |
|---+----------------------------------+--------+------------|
| | System lock enabled | T14 | pins 2 & 3 |
| | | | closed |
|---+----------------------------------+--------+------------|
| » | CMOS memory normal operation | T21 | Open |
|---+----------------------------------+--------+------------|
| | CMOS memory clear | T21 | Closed |
|---+----------------------------------+--------+------------|
| » | Boot block disabled | T900 | Open |
|---+----------------------------------+--------+------------|
| | Boot block enabled | T900 | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 | Bank 1 |
|------------------+--------------------+--------------------|
| 4MB | (4) 1M x 9 | NONE |
|------------------+--------------------+--------------------|
| 8MB | (4) 1M x 9 | (4) 1M x 9 |
|------------------+--------------------+--------------------|
| 16MB | (4) 4M x 9 | NONE |
|------------------+--------------------+--------------------|
| 20MB | (4) 4M x 9 | (4) 1M x 9 |
|------------------+--------------------+--------------------|
| 32MB | (4) 4M x 9 | (4) 4M x 9 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CACHE CONFIGURATION |
|------------------------------------------------------------|
| Size | CN10 |
|----------------------------+-------------------------------|
| 128KB | Module installed |
|------------------------------------------------------------|
| Note: There are two CN10 connectors. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CACHE JUMPER CONFIGURATION |
|------------------------------------------------------------|
| Setting | T32 |
|-------------------------------------+----------------------|
| Installed | Open |
|-------------------------------------+----------------------|
| Not installed | Closed |
|------------------------------------------------------------|
| Note: There are two T32 shown on the diagram. |
| Depending on board revision, the jumper will be |
| located in either place. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| VRAM CONFIGURATION |
|------------------------------------------------------------|
| Note: VRAM is factory installed and is not configurable. |
+------------------------------------------------------------+