(TXT) View Source
# EVEREX SYSTEMS, INC.
TEMPO LX (NOTEBOOK)
Processor 80386SX
Processor 16/20/25MHZ
Speed
Chip Set C & T
Max. Onboard 5MB
DRAM
Cache None
BIOS Phoenix
Dimensions 355mm x 304mm
I/O Options Floppy drive interface, IDE interface, modem
card,
parallel port, serial port, VGA port
NPU Options 80387SX
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|----------------+----------+---------------------+----------|
| IDE interface | CN1 & | Modem (COM2) | CN10 |
| | CN2 | | |
|----------------+----------+---------------------+----------|
| Floppy drive | CN3 | Power switch | CN11 |
| interface | | | |
|----------------+----------+---------------------+----------|
| Keyboard | CN4 & | Contrast dial | D1 |
| connector | CN5 | | |
|----------------+----------+---------------------+----------|
| LCD display | CN6 | Brightness dial | D2 |
|----------------+----------+---------------------+----------|
| Parallel port | CN7 | Reset switch | R1 |
|----------------+----------+---------------------+----------|
| Serial port | CN8 | Circuit breaker | R2 |
| (COM1) | | reset switch | |
|----------------+----------+---------------------+----------|
| VGA port | CN9 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Jumper | Position |
|----------------------------------------+--------+----------|
| » | Factory configured - do not alter | J1 | N/A |
|---+------------------------------------+--------+----------|
| » | Factory configured - do not alter | J2 | N/A |
|---+------------------------------------+--------+----------|
| » | Factory configured - do not alter | J3 | N/A |
|---+------------------------------------+--------+----------|
| » | Factory configured - do not alter | J4 | N/A |
|---+------------------------------------+--------+----------|
| » | Factory configured - do not alter | J5 | N/A |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| SIze | Bank 0 | Bank 1 | Bank 2 |
|-------------+---------------+---------------+--------------|
| 1MB | 1MB | 1MB | 1MB |
|-------------+---------------+---------------+--------------|
| 3MB | NONE | 2MB ZIP | 2MB ZIP |
| | | Module | Module |
|-------------+---------------+---------------+--------------|
| 5MB | NONE | NONE | 2MB ZIP |
| | | | Module |
|------------------------------------------------------------|
| Note:1MB DRAM is soldered to the system board, 2MB ZIP |
| modules can be installed the additional memory will be |
| detected via the system BIOS. |
+------------------------------------------------------------+
(IMG) IMG 2
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|-------------------+----------+------------------+----------|
| Speaker | CN1 | RJ11 | CN2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MODEM CONFIGURATION |
|------------------------------------------------------------|
| Function | SW1/switch 1 | SW1/switch 3 | SW1/switch 4 |
|-------------+---------------+---------------+--------------|
| MNP enabled | On | On | On |
|-------------+---------------+---------------+--------------|
| MNP | Off | On | On |
| disabled | | | |
|-------------+---------------+---------------+--------------|
| Normal | On | On | On |
|-------------+---------------+---------------+--------------|
| Self test | On | Off | On |
|-------------+---------------+---------------+--------------|
| Relay test | On | On | Off |
|------------------------------------------------------------|
| Note:Switch #2 is factory configured and should not be |
| altered. |
+------------------------------------------------------------+