(TXT) View Source
# COMPAQ COMPUTER CORPORATION
DESKPRO 386N
Processor 80386SX
Processor Speed 16MHz
Chip Set Compaq
Max. Onboard 8MB
DRAM
Cache None
BIOS Compaq
Dimensions 282mm x 191mm
I/O Options Proprietary system memory card slot, VGA
port, parallel port, serial port, bus mouse
port, IDE interface, floppy drive/tape drive
interface
NPU Options 80387SX
CPU MODULE (Model 001496)
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|----------------+----------+---------------------+----------|
| Bus mouse port | CN1 | VGA port | CN4 |
|----------------+----------+---------------------+----------|
| Parallel port | CN2 | Proprietary system | MEM |
| | | memory card slot | |
|----------------+----------+---------------------+----------|
| Serial port | CN3 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Jumper/Switch | Position |
|---------------------------------+---------------+----------|
| » | Factory configured - do not | E8 | Open |
| | alter | | |
|---+-----------------------------+---------------+----------|
| » | Factory configured - do not | E9 | Open |
| | alter | | |
|---+-----------------------------+---------------+----------|
| » | Onboard VGA controller | SW1/1 | On |
| | enabled | | |
|---+-----------------------------+---------------+----------|
| | Onboard VGA controller | SW1/1 | Off |
| | disabled | | |
|---+-----------------------------+---------------+----------|
| » | Setup enabled (ROM | SW1/2 | On |
| | resident) | | |
|---+-----------------------------+---------------+----------|
| | Setup disabled (ROM | SW1/2 | Off |
| | resident) | | |
|---+-----------------------------+---------------+----------|
| » | External boot enabled | SW1/3 | On |
|---+-----------------------------+---------------+----------|
| | Extrenal boot disabled | SW1/3 | Off |
|---+-----------------------------+---------------+----------|
| » | Power-on password enabled | SW1/4 | On |
|---+-----------------------------+---------------+----------|
| | Power-on password disabled | SW1/4 | Off |
|---+-----------------------------+---------------+----------|
| » | Factory configured - do not | SW1/5 | On |
| | alter | | |
|---+-----------------------------+---------------+----------|
| » | Floppy drive write enabled | SW1/6 | On |
|---+-----------------------------+---------------+----------|
| | Floppy drive write disabled | SW1/6 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 | Bank 1 |
|------------------+--------------------+--------------------|
| 1MB | (1) 1M x 9 | NONE |
|------------------+--------------------+--------------------|
| 2MB | (1) 1M x 9 | (1) 1M x 9 |
|------------------+--------------------+--------------------|
| 4MB | (1) 4M x 9 | NONE |
|------------------+--------------------+--------------------|
| 8MB | (1) 4M x 9 | (1) 4M x 9 |
+------------------------------------------------------------+
BACKPLANE BOARD (Model 001451)
(IMG) IMG 2
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|---------------------+----------+----------------+----------|
| CPU module | CN1 | IDE interface | IDE |
|---------------------+----------+----------------+----------|
| 5.25 Floppy drive | FD1 | Fan power | P0 |
| interface | | | |
|---------------------+----------+----------------+----------|
| 3.5 Floppy drive | FD2 | IDE drive/5.25 | P1 |
| interface/power | | drive power | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Jumper | Position |
|--------------------------------------+--------+------------|
| » | Fan speed select automatic | E1 | pins 2 & 3 |
| | (thermostat enabled) | | closed |
|---+----------------------------------+--------+------------|
| | Fan speed select high | E1 | pins 1 & 2 |
| | (thermostat disabled) | | closed |
+------------------------------------------------------------+