(TXT) View Source
# ACQUTEK CORPORATION
PM-7008
Card Type Virtual memory card
Chip Set Unidentified
Maximum Onboard Memory 256KB RAM or 512KB ROM
I/O Options Watch dog timer connectors (2)
Hard Drives supported None
Floppy drives supported None
Data Bus 8-bit ISA
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|--------------------------+-------+-----------------+-------|
| Watch dog timer reset | CN1 | Watch dog timer | CN2 |
| connector (out) | | reset connector | |
| | | (in) | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED |
|------------------------------------------------------------|
| Function | Label |
|-------------------------------------------+----------------|
| Watch dog timer status indicator | L1 |
|------------------------------------------------------------|
| Note: Exact indicator status is unidentified. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MEMORY CONFIGURATION |
|------------------------------------------------------------|
| The memory sockets (bank 0-3) on the PM-7008 accepts SRAM |
| chips (62256) or EPROM chips(27512). |
| |
| The sockets may be filled in any order and a combination |
| of SRAM and EPROM may be used. If ROM |
| |
| is used, the user must program the EPROM chips prior to |
| installation. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RAM/ROM SWITCH SETTINGS |
|------------------------------------------------------------|
| Setting | Label | 1-3 | 4-6 |
|----------------------+-------------+-----------+-----------|
| RAM enabled (bank 0) | JP1 | On | Off |
|----------------------+-------------+-----------+-----------|
| ROM enabled (bank 0) | JP1 | Off | On |
|----------------------+-------------+-----------+-----------|
| RAM enabled (bank 1) | JP2 | On | Off |
|----------------------+-------------+-----------+-----------|
| ROM enabled (bank 1) | JP2 | Off | On |
|----------------------+-------------+-----------+-----------|
| RAM enabled (bank 2) | JP3 | On | Off |
|----------------------+-------------+-----------+-----------|
| ROM enabled (bank 2) | JP3 | Off | On |
|----------------------+-------------+-----------+-----------|
| RAM enabled (bank 3) | JP4 | On | Off |
|----------------------+-------------+-----------+-----------|
| ROM enabled (bank 3) | JP4 | Off | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIOS ADDRESS SELECTION |
|------------------------------------------------------------|
| Address | DSW1/3 | DSW1/4 |
|--------------------+-------------------+-------------------|
| D0000h | Off | Off |
|--------------------+-------------------+-------------------|
| D4000h | On | Off |
|--------------------+-------------------+-------------------|
| D8000h | Off | On |
|--------------------+-------------------+-------------------|
| DC000h | On | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE I/O ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | DSW1/1 | DSW1/2 |
|--------------------+-------------------+-------------------|
| 200h | Off | Off |
|--------------------+-------------------+-------------------|
| 280h | On | Off |
|--------------------+-------------------+-------------------|
| 300h | Off | On |
|--------------------+-------------------+-------------------|
| Reserved | On | On |
+------------------------------------------------------------+