(TXT) View Source
# UNIDENTIFIED
SMART A1
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 16-bit ISA |
|-------------------+----------------------------------------|
| Size: | Half-length, full-height card |
|-------------------+----------------------------------------|
| Hard drive | Two IDE(AT) drives |
| supported: | |
|-------------------+----------------------------------------|
| Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB |
| supported: | drives |
+------------------------------------------------------------+
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|------------------------------------------+-----------------|
| 40-pin primary IDE(AT) connector | J1 |
|------------------------------------------+-----------------|
| 4-pin connector - drive active LED | J2 |
|------------------------------------------+-----------------|
| 34-pin cable connector - floppy drive | J3 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|---------------------------------+-------------+------------|
| IDE(AT) interface enabled | JP2/A | open |
|---------------------------------+-------------+------------|
| IDE(AT) interface disabled | JP2/A | closed |
|---------------------------------+-------------+------------|
| Floppy drive interface enabled | JP2/B | open |
|---------------------------------+-------------+------------|
| Floppy drive interface disabled | JP2/B | closed |
+------------------------------------------------------------+