(TXT) View Source
# SUNIX CO., LTD.
ARTOP AEC6710/F
Data Bus 32-bit PCI
Card Size Full-height, quarter-length card
Hard Drives supported Up to 7 SCSI-2 Fast devices
Floppy drives supported None
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location | Function | Location |
|-------------+----------+------------------------+----------|
| 50-pin SCSI | CN2 | 4-pin connector - | JP3 |
| connector - | | drive active LED | |
| internal | | | |
|-------------+----------+------------------------+----------|
| 50-pin SCSI | CN1 | | |
| connector - | | | |
| external | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|-----------------------------------+--------+---------------|
| » | Factory configured - do not | JP5 | N/A |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Flash ROM normal mode | JP6 | Pins 1 & 2 |
| | | | closed |
|----+------------------------------+--------+---------------|
| | Flash ROM emergency mode | JP6 | Pins 2 & 3 |
| | | | closed |
|----+------------------------------+--------+---------------|
| » | Termination power supply | JP2 | Unidentified |
|------------------------------------------------------------|
| Note: Jumper JP6 position 2 & 3 is for emergency use |
| only. When the system has written to the Flash ROM |
| more than 10, 000 times, an error message is posted |
| that requests jumper JP6 be moved to pins 2 & 3. The |
| flash ROM should then be replaced as soon as possible |
| so normal mode can be resumed. |
+------------------------------------------------------------+