(TXT) View Source
# SILICON VALLEY COMPUTER INC.
ADP111V
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 32-bit, VL-bus |
|---------------+--------------------------------------------|
| Size: | Full-length, full-height card |
|---------------+--------------------------------------------|
| Hard drive | (2) IDE(AT) interface drives, (2) IDE |
| supported: | mirror drives, IDE tape drive |
|---------------+--------------------------------------------|
| Floppy drives | 360KB, 720KB, 1.2MB, or 1.44MB drives |
| supported: | |
+------------------------------------------------------------+
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-------------------------------------------------+----------|
| 9-pin serial port 1 - internal | COM1 |
|-------------------------------------------------+----------|
| 9-pin serial port 2 - external | COM2 |
|-------------------------------------------------+----------|
| 15-pin connector - game port | GAME1 |
|-------------------------------------------------+----------|
| 4-pin connector - Mirror drive active LED | J1 |
|-------------------------------------------------+----------|
| 4-pin connector - primary drive active LED | J2 |
|-------------------------------------------------+----------|
| 40-pin connector - IDE mirror drive cable | J3 |
|-------------------------------------------------+----------|
| 40-pin IDE(AT) interface connector | J4 |
|-------------------------------------------------+----------|
| 40-pin ISA IDE tape/IDE CD-ROM interface | P1 |
| connector | |
|-------------------------------------------------+----------|
| 34-pin control cable connector - floppy drive | P2 |
|-------------------------------------------------+----------|
| 4-pin connector - IDE tape/IDE CD-ROM drive | P3 |
| active LED | |
|-------------------------------------------------+----------|
| 25-pin parallel port - external | P4 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|-----------------------------+----------+-------------------|
| | 8051/8031 micro | E1 | pins 1 & 2, 3 & 4 |
| | controller is installed | | closed |
|---+-------------------------+----------+-------------------|
| | 80C51/80C31 micro | E1 | pins 2 & 3 closed |
| | controller is installed | | |
|---+-------------------------+----------+-------------------|
| » | Serial port 2 enabled | E3 | pins 2 & 3 closed |
|---+-------------------------+----------+-------------------|
| | Serial port 2 disabled | E3 | pins 1 & 2 closed |
|---+-------------------------+----------+-------------------|
| » | Parallel port enabled | E4 | pins 2 & 3 closed |
|---+-------------------------+----------+-------------------|
| | Parallel port disabled | E4 | pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS(CONTINUED) |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | ISA IDE interface enabled | E5 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | ISA IDE interface disabled | E5 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Floppy drive interface enabled | E6 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive interface | E6 | pins 1 & 2 |
| | disabled | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 address 2F8 - | E7 | pins 2 & 3 |
| | 2EFh select | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 address 2E8 - | E7 | pins 1 & 2 |
| | 2EFh select | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 1 address 3F8 - | E8 | pins 2 & 3 |
| | 3FFh select | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 address 3E8 - | E8 | pins 1 & 2 |
| | 3EFh select | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 1 enabled | E9 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 disabled | E9 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port address 378 - | E10 | pins 2 & 3 |
| | 37Fh select | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port address 278 - | E10 | pins 1 & 2 |
| | 27Fh select | | closed |
|---+--------------------------------+----------+------------|
| » | Game port enabled | E11 & | closed |
| | | E12 | |
|---+--------------------------------+----------+------------|
| | Game port disabled | E11 & | open |
| | | E12 | |
|---+--------------------------------+----------+------------|
| » | ISA IDE tape drive interrupt | E13 | pins 2 & 3 |
| | IRQ15 select | | closed |
|---+--------------------------------+----------+------------|
| | ISA IDE tape drive interrupt | E13 | pins 1 & 2 |
| | IRQ10 select | | closed |
|---+--------------------------------+----------+------------|
| | ISA IDE tape drive interrupt | E13 | pins 4 & 5 |
| | IRQ14 select(do not use) | | closed |
|---+--------------------------------+----------+------------|
| » | VESA IDE interface interrupt | E13 | pins 5 & 6 |
| | IRQ14 select | | closed |
|---+--------------------------------+----------+------------|
| | VESA IDE interface interrupt | E13 | pins 6 & 7 |
| | IRQ15 select(do not use) | | closed |
|---+--------------------------------+----------+------------|
| | Factory configured - do not | S1/4 | N/A |
| | alter | | |
|---+--------------------------------+----------+------------|
| | Factory configured - do not | S1/5 | N/A |
| | alter | | |
|---+--------------------------------+----------+------------|
| » | External BIOS enabled | S1/6 | off |
|---+--------------------------------+----------+------------|
| | Internal BIOS enabled | S1/6 | on |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | S1/7 | N/A |
| | alter | | |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | S1/8 | N/A |
| | alter | | |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | SW1/4 | on |
| | alter | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE MEMORY ADDRESS SELECT |
|------------------------------------------------------------|
| Address | S1/1 | S1/2 |
|------------------------+-----------------+-----------------|
| » | CC000h | on | off |
|---+--------------------+-----------------+-----------------|
| | D8000h | off | on |
|---+--------------------+-----------------+-----------------|
| | DC000h | off | off |
|---+--------------------+-----------------+-----------------|
| | Disabled | on | on |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIOS SIZE |
|------------------------------------------------------------|
| Size | E2 | S1/3 |
|-------------------------+-------------------+--------------|
| » | 8KB | open | on |
|----------+--------------+-------------------+--------------|
| | 16KB | closed | off |
|------------------------------------------------------------|
| Note: The manufacturer recommends that the default |
| value of 8KB should not be changed by the user. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA TRANSFER RATE TABLE |
|------------------------------------------------------------|
| | CPU Speed/Type | |
|--------------+----------------+----------------------------|
| Setting | 25/DX2-50 MHz | 33/DX-66 MHz | 50MHz |
|--------------+----------------+---------------+------------|
| 0 | 1.67 | 2.22 | 3.33 |
|--------------+----------------+---------------+------------|
| 1 | 2.00 | 2.66 | 4.00 |
|--------------+----------------+---------------+------------|
| 2 | 2.50 | 3.33 | 5.00 |
|--------------+----------------+---------------+------------|
| 3 | 2.94 | 3.92 | 5.88 |
|--------------+----------------+---------------+------------|
| 4 | 3.12 | 4.60 | 6.25 |
|--------------+----------------+---------------+------------|
| 5 | 4.16 | 5.55 | 8.33 |
|--------------+----------------+---------------+------------|
| 6 | 4.54 | 6.06 | 9.09 |
|--------------+----------------+---------------+------------|
| 7 | 6.25 | 8.33 | 12.50 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA TRANSFER RATE SWITCH SETTINGS |
|------------------------------------------------------------|
| Setting | SW1/1 | SW1/2 | SW1/3 |
|---------------+---------------+--------------+-------------|
| 0 | on | on | on |
|---------------+---------------+--------------+-------------|
| 1 | on | on | off |
|---------------+---------------+--------------+-------------|
| 2 | on | off | on |
|---------------+---------------+--------------+-------------|
| 3 | on | off | off |
|---------------+---------------+--------------+-------------|
| 4 | off | on | on |
|---------------+---------------+--------------+-------------|
| 5 | off | on | off |
|---------------+---------------+--------------+-------------|
| 6 | off | off | on |
|---------------+---------------+--------------+-------------|
| 7 | off | off | off |
+------------------------------------------------------------+