(TXT) View Source
       
       # PERCEPTIVE SOLUTIONS, INC.
       
          WINSTOR, QUICKCACHE
       
          +------------------------------------------------------------+
          +------------------------------------------------------------+
       
          Data bus: 16-bit, ISA
       
          Size: Full-length, full-height card
       
          Hard Drives Supported: Four AT Interface (IDE) drives
       
          Floppy Drives Supported: Two or Four 360KB, 720KB, 1.2MB, or
       
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                    Functiion                    | Location |
          |-------------------------------------------------+----------|
          | 4-pin connector-drive active LED                |    J1    |
          |-------------------------------------------------+----------|
          | 40-pin control cable connector-hard drive 1&2   |    J3    |
          |-------------------------------------------------+----------|
          | 40-pin control cable connector-hard drive 3&4   |    J4    |
          |-------------------------------------------------+----------|
          | 34-pin control cable connector-floppy drive     |    J5    |
          |-------------------------------------------------+----------|
          | 34-pin control cable connector-floppy drive     |    J6    |
          | (optional)                                      |          |
          |-------------------------------------------------+----------|
          | 50-pin receptacle-Hardware Data Compression     |    J7    |
          | Module (winSTOR only)                           |          |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |             Function              |   Location   | Setting |
          |-----------------------------------+--------------+---------|
          | » | Floppy drive enabled          | SW1/switch 1 |   off   |
          |---+-------------------------------+--------------+---------|
          |   | Floppy drive disabled         | SW1/switch 1 |   on    |
          |---+-------------------------------+--------------+---------|
          | » | Single-speed floppy supported | SW1switch 2  |   off   |
          |---+-------------------------------+--------------+---------|
          |   | Dual-speed floppy supported   | SW1/switch 2 |   on    |
          |---+-------------------------------+--------------+---------|
          | » | Factory configured - do not   | SW1/switch 3 |   off   |
          |   | alter                         |              |         |
          |---+-------------------------------+--------------+---------|
          | » | Factory configured - do not   | SW1/switch 4 |   off   |
          |   | alter                         |              |         |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |               MISCELLANEOUS TECHNICAL NOTES                |
          |------------------------------------------------------------|
          | Both the winSTOR and the quickCACHE may use 256KB, 1MB or  |
          |  4MB x8 or x9 SIMM's (100ns or faster). A minimum of 512K  |
          |   cache is required for operation. The winSTOR has 512K    |
          |      on-board and does not require SIMM's to operate.      |
          +------------------------------------------------------------+