(TXT) View Source
# PERCEPTIVE SOLUTIONS, INC.
EASYCACHE IDE, EASYCACHE PRO IDE
+------------------------------------------------------------+
+------------------------------------------------------------+
Data bus: 16-bit, ISA
Size: Full-length, full-height card
Hard Drives Suppported: Four AT Interface (IDE) drives
Floppy Drives Supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
drives
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|---------------------------------------------+--------------|
| 4-pin connector-drive active LED | J1 |
|---------------------------------------------+--------------|
| 9-pin serial port | J2 |
|---------------------------------------------+--------------|
| 40-pin control cable connector-hard drive 1 | J3 |
|---------------------------------------------+--------------|
| 40-pin control cable connector-hard drive 2 | J4 |
|---------------------------------------------+--------------|
| 34-pin control cable connector-floppy drive | J5 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|-----------------------------------+--------------+---------|
| » | Hard drive port address | SW1/switch 3 | off |
| | 1F0-1F7h, 3F0-3F1h, 3F7h | | |
|---+-------------------------------+--------------+---------|
| | Hard drive port address | SW1/switch 3 | on |
| | 170-177h, 370-371h, 377h | | |
|---+-------------------------------+--------------+---------|
| » | Floppy drive enabled | SW1/switch 4 | off |
|---+-------------------------------+--------------+---------|
| | Floppy drive disabled | SW1/switch 4 | on |
|---+-------------------------------+--------------+---------|
| » | Single-speed floppy supported | SW1/switch 5 | off |
|---+-------------------------------+--------------+---------|
| | Dual-speed floppy supported | SW1/switch 5 | on |
|---+-------------------------------+--------------+---------|
| » | Factory configured - do not | SW1/switch | off |
| | alter | 10 | |
|---+-------------------------------+--------------+---------|
| » | hSOS load enabled | SW1/switch | off |
| | | 11 | |
|---+-------------------------------+--------------+---------|
| | hSOS load disabled | SW1/switch | on |
| | | 11 | |
|---+-------------------------------+--------------+---------|
| » | Factory configured - do not | SW1/switch | off |
| | alter | 12 | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BIOS ADDRESS |
|------------------------------------------------------------|
| Address | SW1/switch 1 | SW1/switch 2 |
|--------------------+-------------------+-------------------|
| » | D800h | on | off |
|---+----------------+-------------------+-------------------|
| | D000h | off | on |
|---+----------------+-------------------+-------------------|
| | C800h | off | off |
|---+----------------+-------------------+-------------------|
| | Disabled | on | on |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT REQUEST |
|------------------------------------------------------------|
| IRQ |SW1/switch 6|SW1/switch 7|SW1/switch |SW1/switch |
| | | | 8 | 9 |
|----------+------------+------------+-----------+-----------|
| |Disabled| off | off | off | off |
|-+--------+------------+------------+-----------+-----------|
| | IRQ5 | on | off | off | off |
|-+--------+------------+------------+-----------+-----------|
| | IRQ12 | off | on | off | off |
|-+--------+------------+------------+-----------+-----------|
|»| IRQ14 | off | off | on | off |
|-+--------+------------+------------+-----------+-----------|
| | IRQ15 | off | off | off | on |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CACHE MEMORY CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 | Bank 1 |
|---------------+-----------------------+--------------------|
| 512KB | (2) 256K x 9 | NONE |
|---------------+-----------------------+--------------------|
| 1MB | (2) 256K x 9 | (2) 256K x 9 |
|---------------+-----------------------+--------------------|
| 2MB | (2) 1M x 9 | NONE |
|---------------+-----------------------+--------------------|
| 2.5MB | (2) 1M x 9 | (2) 256K x 9 |
|---------------+-----------------------+--------------------|
| 4MB | (2) 1M x 9 | (2) 1M x 9 |
|---------------+-----------------------+--------------------|
| 8MB* | (2) 4M x 9 | NONE |
|---------------+-----------------------+--------------------|
| 8.5MB* | (2) 4M x 9 | (2) 256K x 9 |
|---------------+-----------------------+--------------------|
| 10MB* | (2) 4M x 9 | (2) 1M x 9 |
|---------------+-----------------------+--------------------|
| 16MB* | (2) 4M x 9 | (2) 4M x 9 |
|------------------------------------------------------------|
| Note:* 4MBx9 SIMM's are only supported by the easyCACHE |
| Pro IDE controller |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LED INFORMATION |
|------------------------------------------------------------|
| Hard drive read, write, or seek in progress. | D1 |
| | |
| Lights solid to indicate dirty cache | |
|---------------------------------------------------+--------|
| Data transfer between cache and host in progress. | D2 |
+------------------------------------------------------------+