(TXT) View Source
# NCL AMERICA
NCL 5275, NCL 5276
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two ST506/412 RLL drives
Floppy drives supported: NCL 5275: Two 360KB, 720KB, 1.2MB, or
NCL 5276: None
Maximum heads/cyl.: 16 heads and 2048 cylinders
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| 34-pin control cable connector-hard drive | CN1 |
|----------------------------------------------+-------------|
| 20-pin data cable connector-drive 0 | CN2 |
|----------------------------------------------+-------------|
| 20-pin data cable connector-drive 1 | CN3 |
|----------------------------------------------+-------------|
| 34-pin data cable connector-floppy drive | CN4 |
|----------------------------------------------+-------------|
| 4-pin connector-drive active LED | CN5 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Hard Drive Interrupt is IRQ14 | JP1 | pins 2 & 3 |
| | (hard wired) | | closed |
|---+--------------------------------+----------+------------|
| | Hard Drive Interrupt is IRQ15 | JP1 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | INDEX signal is used directly | JP2 | open |
| | (5276 only) | | |
|---+--------------------------------+----------+------------|
| | INDEX signal is selected by | JP2 | closed |
| | SYNC signal (5276 only) | | |
|---+--------------------------------+----------+------------|
| » | Floppy drive port address is | JP3 | closed |
| | 3F0-3F7h (5276 only) | | |
|---+--------------------------------+----------+------------|
| | Floppy drive port address is | JP3 | open |
| | 370-377h (5276 only) | | |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | JP4 | open |
| | alter | | |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | JP5 | open |
| | alter | | |
|---+--------------------------------+----------+------------|
| » | 11 bit ECC burst length | JP6 | closed |
|---+--------------------------------+----------+------------|
| | 5 bit ECC burst length | JP6 | open |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | JP7 | open |
| | alter | | |
|---+--------------------------------+----------+------------|
| » | LED is lit only during access | JP8 | open |
|---+--------------------------------+----------+------------|
| | LED always lit once unit is | JP8 | closed |
| | selected | | |
|---+--------------------------------+----------+------------|
| » | BIOS enabled | JP9 | closed |
|---+--------------------------------+----------+------------|
| | BIOS disabled | JP9 | open |
|---+--------------------------------+----------+------------|
| » | Hard drive port address is | JP10 | pins 1 & 2 |
| | 1F0-1F7h | | closed |
|---+--------------------------------+----------+------------|
| | Hard drive port address is | JP10 | pins 2 & 3 |
| | 170-177h | | closed |
|---+--------------------------------+----------+------------|
| » | BIOS address is C800h | JP11 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | BIOS address is D800h | JP11 | pins 2 & 3 |
| | | | closed |
+------------------------------------------------------------+