(TXT) View Source
       
       # LONGSHINE MICROSYSTEM, INC.
       
          LCS-6624/B (UM-6624-B00)
       
          Card Type            Hard drive controller card                
          Hard Drives          Two IDE (AT) drives                       
          supported            
          Floppy drives        Two 360KB, 720KB, 1.2MB, or 1.44MB drives 
          supported            
          Data Bus             16-bit ISA                                
          Card Size            Half-length, half-height card             
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |     Function      | Location |     Function     | Location |
          |-------------------+----------+------------------+----------|
          | 34-pin cable      |    J1    | 9-pin serial     |    J5    |
          | connector -       |          | port 1 -         |          |
          | floppy drive      |          | external         |          |
          |-------------------+----------+------------------+----------|
          | 40-pin primary    |    J2    | 25-pin parallel  |    J6    |
          | IDE(AT) connector |          | port - external  |          |
          |-------------------+----------+------------------+----------|
          | 16-pin game port  |    J3    | 2-pin connector  |   JP1    |
          |                   |          | - drive active   |          |
          |                   |          | LED              |          |
          |-------------------+----------+------------------+----------|
          | 10-pin serial     |    J4    |                  |          |
          | port 2 - internal |          |                  |          |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |               Function                | Label |  Position  |
          |---------------------------------------+-------+------------|
          | » | Hardware configuration setting    |  JP3  | Pins 2 & 3 |
          |   |                                   |       |   closed   |
          |---+-----------------------------------+-------+------------|
          |   | Software configuration setting    |  JP3  | Pins 1 & 2 |
          |   |                                   |       |   closed   |
          |---+-----------------------------------+-------+------------|
          | » | Factory configured - do not alter |  JP5  |   Closed   |
          |---+-----------------------------------+-------+------------|
          | » | Floppy drive interface enabled    |  JP6  |   Closed   |
          |---+-----------------------------------+-------+------------|
          |   | Floppy drive interface disabled   |  JP6  |    Open    |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |              PARALLEL PORT ADDRESS SELECTION               |
          |------------------------------------------------------------|
          |     Setting      |        JP10        |        JP11        |
          |------------------+--------------------+--------------------|
          |   | LPT1 (378h)  | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
          |---+--------------+--------------------+--------------------|
          | » | LPT2 (278h)  | Pins 1 & 2 closed  | Pins 1 & 2 closed  |
          |---+--------------+--------------------+--------------------|
          |   | LPT3 (3BCh)  | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
          |---+--------------+--------------------+--------------------|
          |   |   Disabled   | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |          SERIAL PORT 1 & 2 ADDRESS SELECTION           |
          |------------------------------------------------------------|
          |       Setting       |    JP7     |    JP8     |    JP9     |
          |---------------------+------------+------------+------------|
          |   Serial 1 COM1 /   | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 |
          |    serial 2 COM2    |   closed   |   closed   |   closed   |
          |---------------------+------------+------------+------------|
          |   Serial 1 COM1 /   | Pins 1 & 2 | Pins 2 & 3 | Pins 1 & 2 |
          |  serial 2 disabled  |   closed   |   closed   |   closed   |
          |---------------------+------------+------------+------------|
          |   Serial 1 COM2 /   | Pins 1 & 2 | Pins 1 & 2 | Pins 2 & 3 |
          |    serial 2 COM1    |   closed   |   closed   |   closed   |
          |---------------------+------------+------------+------------|
          | Serial 1 disabled / | Pins 2 & 3 | Pins 1 & 2 | Pins 2 & 3 |
          |    serial 2 COM1    |   closed   |   closed   |   closed   |
          |---------------------+------------+------------+------------|
          | Serial 1 disabled / | Pins 2 & 3 | Pins 1 & 2 | Pins 1 & 2 |
          |    serial 2 COM2    |   closed   |   closed   |   closed   |
          |---------------------+------------+------------+------------|
          |   Serial 1 COM2 /   | Pins 1 & 2 | Pins 2 & 3 | Pins 2 & 3 |
          |  serial 2 disabled  |   closed   |   closed   |   closed   |
          |---------------------+------------+------------+------------|
          | Serial 1 disabled / | Pins 2 & 3 | Pins 2 & 3 |    N/A     |
          |  serial 2 disabled  |   closed   |   closed   |            |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    IDE INTERFACE ENABLE                    |
          |------------------------------------------------------------|
          |      Setting       |        JP2        |        JP4        |
          |--------------------+-------------------+-------------------|
          |       Enable       |      Closed       |      Closed       |
          |--------------------+-------------------+-------------------|
          |      Disabled      |       Open        |       Open        |
          +------------------------------------------------------------+