(TXT) View Source
       
       # INITIO CORPORATION
       
          INI-9400U/UW
       
          Card Type            Hard drive controller                     
          Data Bus             32-bit PCI                                
          Card Size            Quarter-length, full-height card          
          Hard Drives          Up to 60 Ultra or Ultra Wide SCSI devices 
          supported            
          Floppy drives        None                                      
          supported            
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |     Function      | Location |     Function     | Location |
          |-------------------+----------+------------------+----------|
          | 50-pin SCSI       |    J1    | 50-pin SCSI      |    J7    |
          | connector channel |          | connector        |          |
          | 0 - internal      |          | channel 2 -      |          |
          |                   |          | internal         |          |
          |-------------------+----------+------------------+----------|
          | 4-pin connector - |    J2    | Drive active LED |    J8    |
          | drive active LED  |          |                  |          |
          |-------------------+----------+------------------+----------|
          | 68-pin SCSI       |    J3    | 68-pin SCSI      |    J9    |
          | connector -       |          | connector        |          |
          | external          |          | channel 2 -      |          |
          |                   |          | internal         |          |
          |-------------------+----------+------------------+----------|
          | 50-pin SCSI       |    J4    | 50-pin SCSI      |   J10    |
          | connector channel |          | connector        |          |
          | 1 - internal      |          | channel 3 -      |          |
          |                   |          | internal         |          |
          |-------------------+----------+------------------+----------|
          | Drive active LED  |    J5    | Drive active LED |   J11    |
          |-------------------+----------+------------------+----------|
          | 68-pin SCSI       |    J6    | 68-pin SCSI      |   J12    |
          | connector channel |          | connector        |          |
          | 1 - internal      |          | channel 3 -      |          |
          |                   |          | internal         |          |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |     TERMINATION CONFIGURATION FOR MULTIPLE INITIATORS      |
          |------------------------------------------------------------|
          |      Note: Jumpers JP1, JP2, JP3, and JP4 set active       |
          |      termination on each specific SCSI bus so it is always |
          |      on. The setting is used only when the adapter shares  |
          |      the SCSI bus with an adapter in another computer. If  |
          |      this computer can be turned off, closing the jumper   |
          |      will insure that active on-board termination is on    |
          |      all the time, regardless of whether power is applied  |
          |      or not.                                               |
          +------------------------------------------------------------+