(TXT) View Source
# KOUWELL ELECTRONICS CORPORATION
KW-556G (REV. 2.0)
Data Bus 16-bit ISA
Card Size Half-length, full-height card
Hard Drives Two IDE (AT) drives
supported
Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB drives
supported
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location | Function | Location |
|-------------------+----------+------------------+----------|
| 16-pin game port | CN1 | 9-pin serial | CN5 |
| | | port 1 - | |
| | | external | |
|-------------------+----------+------------------+----------|
| 40-pin IDE(AT) | CN2 | 25-pin parallel | CN6 |
| connector | | port - external | |
|-------------------+----------+------------------+----------|
| 34-pin cable | CN3 | 4-pin connector | JP1 |
| connector - | | - drive active | |
| floppy drive | | LED | |
|-------------------+----------+------------------+----------|
| 10-pin serial | CN4 | | |
| port 2 - internal | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|-------------------------------------+-------+--------------|
| » | Factory configured - do not | J9 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Serial port 1 enabled | JP2 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Serial port 1 disabled | JP2 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Game port enabled | JP3 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Game port disabled | JP3 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Floppy drive interface enabled | JP4 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Floppy drive interface disabled | JP4 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Parallel port I/O address 378h | JP5 | Pins 1 & 2 |
| | select | | closed |
|---+---------------------------------+-------+--------------|
| | Parallel port I/O address 278h | JP5 | Pins 2 & 3 |
| | select | | closed |
|---+---------------------------------+-------+--------------|
| » | IDE(AT) interface enabled | JP6 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | IDE(AT) interface disabled | JP6 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Serial port 2 enabled | JP7 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Serial port 2 disabled | JP7 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Controller is only one in | JP8 | Pins 1 & 2 |
| | system (I/O address is 1F0-1F7, | | closed |
| | 3F6, 3F7) | | |
|---+---------------------------------+-------+--------------|
| | Other controllers are in system | JP8 | Pins 2 & 3 |
| | (I/O address is 170-177, 376, | | closed |
| | 377) | | |
|---+---------------------------------+-------+--------------|
| » | Serial port 1 COM1 enabled | JP9 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Serial port 1 COM3 enabled | JP9 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Serial port 2 COM2 enabled | JP10 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Serial port 2 COM4 enabled | JP10 | Pins 2 & 3 |
| | | | closed |
+------------------------------------------------------------+