(TXT) View Source
# GIGA-BYTE TECHNOLOGY, INC.
GA-107 REV.2
Data bus: PCI-bus
Size: Three/quarter-length, full-height card
Hard drive Two IDE (AT) interface drives
supported:
Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB
supported: drives
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-----------------------------------------------+------------|
| 10-pin serial port 2 - internal | CN1 |
|-----------------------------------------------+------------|
| Game port - internal | CN2 |
|-----------------------------------------------+------------|
| 34-pin control cable connector - floppy drive | CN3 |
|-----------------------------------------------+------------|
| 9-pin serial port 1 - external | CN4 |
|-----------------------------------------------+------------|
| 40-pin IDE (AT) Interface connector | CN5 |
|-----------------------------------------------+------------|
| Drive active LED connector | JP13 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|---------------------------+------------+-------------------|
| » Floppy drive enabled | JP4 | Pins 1 & 2 closed |
|---------------------------+------------+-------------------|
| Floppy drive disabled | JP4 | Pins 2 & 3 closed |
|---------------------------+------------+-------------------|
| » Game port enabled | JP6 | Pins 1 & 2 closed |
|---------------------------+------------+-------------------|
| Game port disabled | JP6 | Pins 2 & 3 closed |
|---------------------------+------------+-------------------|
| » HDD enabled | JP12 | Open |
|---------------------------+------------+-------------------|
| HDD disabled | JP12 | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 1 (CN4) CONFIGURATION |
|------------------------------------------------------------|
| COM | JP8 | JP9 |
|------------------+--------------------+--------------------|
| » COM1 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| COM3 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| Disabled | N/A | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 2 (CN1) CONFIGURATION |
|------------------------------------------------------------|
| COM | JP1 | JP2 |
|------------------+--------------------+--------------------|
| » COM2 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| COM4 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| Disabled | N/A | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT (CN5) CONFIGURATION |
|------------------------------------------------------------|
| LPT | JP5 | JP7 |
|------------------+--------------------+--------------------|
| LPT2 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| LPT3 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| Disabled | N/A | Pins 2 & 3 closed |
+------------------------------------------------------------+