(TXT) View Source
# DIVERSE LOGISTICS INC.
ULTRA-WINDJAMMER
Maximum Onboard Memory Unidentified
Hard Drives supported 30 Ultra-SCSI devices
Floppy drives supported None
Data Bus External
Card Size 14cm x 20 cm
RAID levels supported 0, 1
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location | Function | Location |
|-------------------+----------+------------------+----------|
| 68-pin SCSI | CN3 | 68-pin SCSI | CN7 |
| connector channel | | connector to | |
| 0 -- internal | | host - external | |
|-------------------+----------+------------------+----------|
| 68-pin SCSI | CN4 | 3-pin | CN8 |
| connector channel | | proprietary JST | |
| 1 - internal | | (RS-232) | |
| | | connector - see | |
| | | note below | |
|-------------------+----------+------------------+----------|
| Proprietary | CN6 | Power connector | CN9 |
| connector - | | | |
| differential | | | |
| converter board | | | |
| (optional) | | | |
|------------------------------------------------------------|
| Note: CN8, the JST connector, can be connected to a |
| DE-9 serial connector using a supplied cable that |
| performs signal conversion. This cable allows the |
| Windjammer to be connected to a VT100/VT220 terminal |
| or terminal emulator. |
| |
| Note: CN6 or CN7 connects the Ultra-Windjammer |
| controller to the host system. CN6 allows the |
| Windjammer to interface to host systems with |
| differential SCSI ports via an optional differential |
| converter board. |
| |
| Note: CN3, CN4, and CN7 (68-pin connectors) can also |
| be connected to 50-pin narrow SCSI via optional |
| converters. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TERMINATION CONFIGURATION |
|------------------------------------------------------------|
| Channel | Bus | Controller | Termination |
| | | Position | Required |
|------------+---------+----------------+--------------------|
| Controller | SCSI | At end of SCSI | RP1-RP5 installed |
| to Host | Wide | bus | |
|------------+---------+----------------+--------------------|
| Controller | SCSI | Not at end of | RP1-RP5 removed |
| to Host | Wide | SCSI bus | |
|------------+---------+----------------+--------------------|
| Controller | SCSI | Not at end of | RP1-RP3 removed, |
| to Host | Narrow | SCSI bus | |
| | | | RP4 & RP5 |
| | | | installed |
|------------+---------+----------------+--------------------|
| Channel 0 | SCSI | At end of SCSI | RP14-RP18 |
| | Wide | bus | installed |
|------------+---------+----------------+--------------------|
| Channel 0 | SCSI | Not at end of | RP14-RP18 removed |
| | Wide | SCSI bus | |
|------------+---------+----------------+--------------------|
| Channel 0 | SCSI | Not at end of | RP15--RP17 |
| | Narrow | SCSI bus | removed, |
| | | | |
| | | | RP14 & RP18 |
| | | | installed |
|------------+---------+----------------+--------------------|
| Channel 1 | SCSI | At end of SCSI | RP7-RP11 installed |
| | Wide | bus | |
|------------+---------+----------------+--------------------|
| Channel 1 | SCSI | Not at end of | RP7-RP11 removed |
| | Wide | SCSI bus | |
|------------+---------+----------------+--------------------|
| Channel 1 | SCSI | Not at end of | RP8, RP10 & RP11 |
| | Narrow | SCSI bus | removed, |
| | | | |
| | | | RP7 & RP9 |
| | | | installed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| JST PINOUT |
|------------------------------------------------------------|
| Pin | Description |
|----------------------------+-------------------------------|
| 1 | Ground |
|----------------------------+-------------------------------|
| 2 | Receive Data |
|----------------------------+-------------------------------|
| 3 | Transmit Data |
+------------------------------------------------------------+