(TXT) View Source
# DATA TECHNOLOGY CORPORATION
DTC2277 (TEKRAM VER. 1)
Chipset Tekram
Maximum Onboard Memory Unidentified
Data Bus 32-bit VESA local bus
Card Size Full height, full length
Hard Drives Supported Four IDE-AT devices
Floppy Drives Supported Unidentified
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|--------------------+-------+-----------------------+-------|
| 4-pin drive active | JP1 | 40-pin secondary | CN2 |
| LED | | IDE(AT) connector | |
|--------------------+-------+-----------------------+-------|
| 4-pin connector to | JP2 | 34-pin cable | CN3 |
| speaker | | connector - floppy | |
| | | drive | |
|--------------------+-------+-----------------------+-------|
| 40-pin primary | CN1 | | |
| IDE(AT) connector | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-----------------------------------+--------+---------------|
| » | Primary IDE channel noise | JDR0 | Open |
| | filter mode 1 enabled | | |
|----+------------------------------+--------+---------------|
| | Primary IDE channel noise | JDR0 | Closed |
| | filter mode 2 enabled | | |
|----+------------------------------+--------+---------------|
| » | Secondary IDE channel noise | JDR1 | Open |
| | filter mode 1 enabled | | |
|----+------------------------------+--------+---------------|
| | Secondary IDE channel noise | JDR1 | Closed |
| | filter mode 2 enabled | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | JP3 | Unidentified |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | RP1 | Unidentified |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | RP2 | Unidentified |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | RP3 | Unidentified |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | RP4 | Unidentified |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | RP5 | Unidentified |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | RP6 | Unidentified |
| | alter | | |
|----+------------------------------+--------+---------------|
| » | Factory configured - do not | RP7 | Unidentified |
| | alter | | |
|------------------------------------------------------------|
| Note:The exact implementation of the noise filter |
| modes are unidentified. However, mode 1 is compatible |
| with most hard drives. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| The configuration of the memory is unidentified. |
+------------------------------------------------------------+