(TXT) View Source
# DTK COMPUTER, INC.
PTI-227W (VER. 3)
Data Bus 16-bit ISA
Card Size Half-length, half-height card
Hard Drives Two IDE (AT) drives
supported
Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB drives
supported
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location | Function | Location |
|-------------------+----------+------------------+----------|
| 40-pin IDE(AT) | JP1 | 34-pin cable | JP5 |
| connector | | connector - | |
| | | floppy drive | |
|-------------------+----------+------------------+----------|
| 16-pin game port | JP2 | 2-pin connector | JP8 |
| | | - drive active | |
| | | LED | |
|-------------------+----------+------------------+----------|
| 9-pin serial port | JP3 | 25-pin parallel | JP15 |
| 1 - external | | port - external | |
|-------------------+----------+------------------+----------|
| 10-pin serial | JP4 | | |
| port 2 - internal | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|---------------------------------------+-------+------------|
| » | IDEIOR path ATBUS IOR select | J1 | Pins 2 & 3 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| | IDEIOR path W83758P chipset | J1 | Pins 1 & 2 |
| | (IOROP) select | | closed |
|---+-----------------------------------+-------+------------|
| » | IDEIOW path ATBUS IOW select | J2 | Pins 2 & 3 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| | IDEIOW path W83758P chipset | J2 | Pins 1 & 2 |
| | (IOWOP) select | | closed |
|---+-----------------------------------+-------+------------|
| » | Floppy drive order is normal (A:, | JP6/1 | Pins 1 & 2 |
| | B:) | | closed |
|---+-----------------------------------+-------+------------|
| | Floppy drive order is reversed | JP6/1 | Pins 2 & 3 |
| | (B:, A:) | | closed |
|---+-----------------------------------+-------+------------|
| » | Floppy drive I/O address is | JP6/2 | Pins 2 & 3 |
| | 3F0-3F7h | | closed |
|---+-----------------------------------+-------+------------|
| | Floppy drive I/O address is | JP6/2 | Pins 1 & 2 |
| | 370-377h | | closed |
|---+-----------------------------------+-------+------------|
| » | IDE(AT) interface enabled | JP6/3 | Pins 1 & 2 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| | IDE(AT) interface disabled | JP6/3 | Pins 2 & 3 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| » | IDE I/O address is 3F6, 3F7, | JP6/4 | Pins 2 & 3 |
| | 1F0-1F7h | | closed |
|---+-----------------------------------+-------+------------|
| | IDE I/O address is 376, 377, | JP6/4 | Pins 1 & 2 |
| | 170-177h | | closed |
|---+-----------------------------------+-------+------------|
| » | Floppy drive enabled | JP6/5 | Pins 1 & 2 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| | Floppy drive disabled | JP6/5 | Pins 2 & 3 |
| | | | closed |
|---+-----------------------------------+-------+------------|
| | Parallel port is bidirectional | JP11 | Open |
|---+-----------------------------------+-------+------------|
| | Parallel port is output only | JP11 | Closed |
|---+-----------------------------------+-------+------------|
| » | Game port enabled | JP16 | Closed |
|---+-----------------------------------+-------+------------|
| | Game port disabled | JP16 | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | JP9/5 | JP9/6 |
|------------------+--------------------+--------------------|
| » | LPT1 (378h) | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | LPT2 (278h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+--------------+--------------------+--------------------|
| | LPT3 (3BCh) | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 1 ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | JP9/1 | JP9/2 |
|------------------+--------------------+--------------------|
| » | COM1 (3F8h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+--------------+--------------------+--------------------|
| | COM3 (3E8h) | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | COM4 (2E8h) | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 2 ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | JP9/3 | JP9/4 |
|------------------+--------------------+--------------------|
| » | COM2 (3F8h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+--------------+--------------------+--------------------|
| | COM3 (3E8h) | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | COM4 (2E8h) | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 1 INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | JP12/1 | JP12/2 | JP12/3 |
|------------------+-------------+-------------+-------------|
| | IRQ3 | Open | Closed | Open |
|---+--------------+-------------+-------------+-------------|
| » | IRQ4 | Closed | Open | Open |
|---+--------------+-------------+-------------+-------------|
| | IRQ5 | Open | Open | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 2 INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | JP12/4 | JP12/5 | JP12/6 |
|------------------+-------------+-------------+-------------|
| » | IRQ3 | Closed | Open | Open |
|---+--------------+-------------+-------------+-------------|
| | IRQ4 | Open | Closed | Open |
|---+--------------+-------------+-------------+-------------|
| | IRQ5 | Open | Open | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | JP12/7 | JP12/8 |
|-----------------------+------------------+-----------------|
| | IRQ5 | Open | Closed |
|-----+-----------------+------------------+-----------------|
| » | IRQ7 | Closed | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| In jumpers JP6/1-5 and JP9/1-6, pin positions 1 &2 |
| correspond to "low" board positions. Positions 2 & 3 |
| correspond to "high" board positions. |
+------------------------------------------------------------+