(TXT) View Source
# DATA TECHNOLOGY CORPORATION
DTC2280E (400521-89A)
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 16-bit ISA |
|---------------------+--------------------------------------|
| Size: | Half-length, half-height card |
|---------------------+--------------------------------------|
| Hard drive | Two IDE(AT) or EIDE interface drives |
| supported: | |
|---------------------+--------------------------------------|
| Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB |
| supported: | |
+------------------------------------------------------------+
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|----------------------------------------+-------------------|
| 25-pin parallel port - external | J1 |
|----------------------------------------+-------------------|
| 9-pin serial port 1 - external | J2 |
|----------------------------------------+-------------------|
| 10-pin serial port 2 - internal | J3 |
|----------------------------------------+-------------------|
| 16-pin game port - internal | J4 |
|----------------------------------------+-------------------|
| 34-pin cable connector - floppy drive | J5 |
|----------------------------------------+-------------------|
| 2-pin connector - drive active LED | J6 |
|----------------------------------------+-------------------|
| 40-pin IDE(AT) interface connector | J7 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Game port enabled | W1 | closed |
|---+--------------------------------+----------+------------|
| | Game port disabled | W1 | open |
|---+--------------------------------+----------+------------|
| » | Hard drive interrupt IRQ14 | W15 | pins 1 & 2 |
| | select | | closed |
|---+--------------------------------+----------+------------|
| | Hard drive interrupt IRQ15 | W15 | pins 2 & 3 |
| | select | | closed |
|---+--------------------------------+----------+------------|
| » | IDE(AT) interface address is | W17 | pins 1 & 2 |
| | 1F0h | | closed |
|---+--------------------------------+----------+------------|
| | IDE(AT) interface address is | W17 | pins 2 & 3 |
| | 170h | | closed |
|---+--------------------------------+----------+------------|
| » | IDE(AT) interface enabled | W18 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | IDE(AT) interface disabled | W18 | pins 1 & 2 |
| | | | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 1 CONFIGURATION |
|------------------------------------------------------------|
| Port 1 | W21 | W22 |
|----------------+---------------------+---------------------|
| » | COM1 | pins 1 & 2 closed | pins 2 & 3 closed |
|---+------------+---------------------+---------------------|
| | COM3 | pins 2 & 3 closed | pins 1 & 2 closed |
|---+------------+---------------------+---------------------|
| | Disabled | pins 1 & 2 closed | pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 2 CONFIGURATION |
|------------------------------------------------------------|
| Port 2 | W23 | W24 |
|----------------+---------------------+---------------------|
| » | COM2 | pins 1 & 2 closed | pins 2 & 3 closed |
|---+------------+---------------------+---------------------|
| | COM4 | pins 2 & 3 closed | pins 1 & 2 closed |
|---+------------+---------------------+---------------------|
| | Disabled | pins 1 & 2 closed | pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT ADDRESS CONFIGURATION |
|------------------------------------------------------------|
| LPT | W19 | W20 |
|----------------+---------------------+---------------------|
| » | 1 (378h) | pins 2 & 3 closed | pins 1 & 2 closed |
|---+------------+---------------------+---------------------|
| | 2 (278h) | pins 1 & 2 closed | pins 2 & 3 closed |
|---+------------+---------------------+---------------------|
| | 3 ( BCh) | pins 2 & 3 closed | pins 2 & 3 closed |
|---+------------+---------------------+---------------------|
| | Disabled | pins 1 & 2 closed | pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 1 INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | W12 | W13 | W14 |
|----------------+--------------+--------------+-------------|
| » | IRQ4 | open | open | closed |
|---+------------+--------------+--------------+-------------|
| | IRQ3 | open | closed | open |
|---+------------+--------------+--------------+-------------|
| | IRQ5 | closed | open | open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 2 INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | W9 | W10 | W11 |
|----------------+--------------+--------------+-------------|
| » | IRQ3 | open | open | closed |
|---+------------+--------------+--------------+-------------|
| | IRQ4 | open | closed | open |
|---+------------+--------------+--------------+-------------|
| | IRQ5 | closed | open | open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT INTERRUPT SELECTION |
|------------------------------------------------------------|
| IRQ | W7 | W8 |
|----------------------+------------------+------------------|
| » | 7 | open | closed |
|------+---------------+------------------+------------------|
| | 5 | closed | open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT MODE CONFIGURATION |
|------------------------------------------------------------|
| MODE | W16 | W25 |
|-----------------+---------------------+--------------------|
| » | Printer | pins 2 & 3 closed | pins 2 & 3 closed |
|-----+-----------+---------------------+--------------------|
| | ECP/EPP | pins 2 & 3 closed | pins 1 & 2 closed |
|-----+-----------+---------------------+--------------------|
| | EPP | pins 1 & 2 closed | pins 2 & 3 closed |
|------------------------------------------------------------|
| Note: You must select a DMA channel when using ECP mode. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DMA SELECTION |
|------------------------------------------------------------|
| CHANNEL | W3 | W4 | W5 | W6 |
|------------+-----------+-----------+-----------+-----------|
| 1 | closed | open | closed | open |
|------------+-----------+-----------+-----------+-----------|
| 3 | open | closed | open | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| The floppy controller in automatically configured: When a |
| cable is attached, it is enabled, when no cable is |
| attached it is disabled. |
+------------------------------------------------------------+