(TXT) View Source
       
       # DATA TECHNOLOGY CORPORATION
       
          DTC2132D
       
          +------------------------------------------------------------+
          |------------------------------------------------------------|
          | Data bus:          | 32-bit PCI                            |
          |--------------------+---------------------------------------|
          | Size:              | Half-length, half-height card         |
          |--------------------+---------------------------------------|
          | Hard drive         | Four IDE(AT) or EIDE interface drives |
          | supported:         |                                       |
          |--------------------+---------------------------------------|
          | Floppy drives      | None                                  |
          | supported:         |                                       |
          +------------------------------------------------------------+
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                  Function                  |   Location    |
          |--------------------------------------------+---------------|
          | 10-pin DTC-1415 ISA B Interrupt adapter    |      J1       |
          | connector                                  |               |
          |--------------------------------------------+---------------|
          | 4-pin connector - drive active LED         |      J2       |
          |--------------------------------------------+---------------|
          | 40-pin connector - primary IDE(AT)         |      J3       |
          | interface                                  |               |
          |--------------------------------------------+---------------|
          | 40-pin connector - secondary IDE(AT)       |      J4       |
          | interface                                  |               |
          |------------------------------------------------------------|
          | Note: Connector J1 is intended for use in systems that do  |
          | not support redirected PCI interrupts.                     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |              Function              |  Location   | Setting |
          |------------------------------------+-------------+---------|
          | » | Primary port INTA redirect to  | W1/pins 1 & | closed  |
          |   | IRQ14                          |      3      |         |
          |---+--------------------------------+-------------+---------|
          |   | Primary port INTB redirect to  | W1/pins 2 & | closed  |
          |   | IRQ14                          |      4      |         |
          |---+--------------------------------+-------------+---------|
          |   | Primary port INTC redirect to  | W1/pins 3 & | closed  |
          |   | IRQ14                          |      5      |         |
          |---+--------------------------------+-------------+---------|
          |   | Primary port INTD redirect to  | W1/pins 4 & | closed  |
          |   | IRQ14                          |      6      |         |
          |---+--------------------------------+-------------+---------|
          |   | Secondary port INTA redirect   | W2/pins 1 & | closed  |
          |   | to IRQ15, IRQ12 or IRQ11       |      3      |         |
          |---+--------------------------------+-------------+---------|
          |   | Secondary port INTB redirect   | W2/pins 2 & | closed  |
          |   | to IRQ15, IRQ12 or IRQ11       |      4      |         |
          |---+--------------------------------+-------------+---------|
          |   | Secondary port INTC redirect   | W2/pins 3 & | closed  |
          |   | to IRQ15, IRQ12 or IRQ11       |      5      |         |
          |---+--------------------------------+-------------+---------|
          |   | Secondary port INTD redirect   | W2/pins 4 & | closed  |
          |   | to IRQ15, IRQ12 or IRQ11       |      6      |         |
          |---+--------------------------------+-------------+---------|
          | » | Fixed IDE address at power-up  |     W3      | closed  |
          |   | (1F0-1F7h)                     |             |         |
          |---+--------------------------------+-------------+---------|
          |   | Relocatable IDE address at     |     W3      |  open   |
          |   | power-up                       |             |         |
          |---+--------------------------------+-------------+---------|
          | » | IDE decode state disabled      |     W4      | closed  |
          |   | after reset                    |             |         |
          |---+--------------------------------+-------------+---------|
          |   | IDE decode state enabled after |     W4      |  open   |
          |   | reset                          |             |         |
          +------------------------------------------------------------+