(TXT) View Source
# CONNER PERIPHERALS, INC.
AT ADAPTER BOARD
+------------------------------------------------------------+
+------------------------------------------------------------+
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE Interface (AT) drives
Floppy drives supported: None
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|----------------------------------------------+-------------|
| 40-pin IDE Interface (AT) connector-internal | CN1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Hard drive port address is | JP1 | open |
| | 1F0-1F7h | | |
|---+--------------------------------+----------+------------|
| | Hard drive port address is | JP1 | closed |
| | 170-177h | | |
|---+--------------------------------+----------+------------|
| » | Chip Select 1 (CS1) enabled | JP2 | closed |
|---+--------------------------------+----------+------------|
| | Chip Select 1 (CS1) disabled | JP2 | open |
|---+--------------------------------+----------+------------|
| » | IRQ14 is cleared with a status | JP3 | pins 2 & 3 |
| | read only | | closed |
|---+--------------------------------+----------+------------|
| | IRQ14 is cleared with | JP3 | pins 1 & 2 |
| | deassertion of Host Slv/Act | | closed |
+------------------------------------------------------------+