(TXT) View Source
# CHICONY, INC.
CH-101B
+------------------------------------------------------------+
+------------------------------------------------------------+
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE Interface (AT) drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
drives
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|----------------------------------------------+-------------|
| 34-pin data cable connector-floppy drive | J1 |
|----------------------------------------------+-------------|
| 40-pin IDE Interface (AT) connector-internal | J2 |
|----------------------------------------------+-------------|
| 10-pin serial port 2 connector-internal | J3 |
|----------------------------------------------+-------------|
| DB-9 serial port 1 connector-external | J4 |
|----------------------------------------------+-------------|
| DB-25 parallel port connector-external | J5 |
|----------------------------------------------+-------------|
| 2-pin connector-drive active LED | J6 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|--------------------------------+--------------+------------|
| » | Floppy drive port address | JP2/jumper 2 | open |
| | is 3F0-3F7h | | |
|---+----------------------------+--------------+------------|
| | Floppy drive port address | JP2/jumper 2 | closed |
| | is 370-377h | | |
|---+----------------------------+--------------+------------|
| » | Single speed floppy drive | JP2/jumper 3 | closed |
| | supported | | |
|---+----------------------------+--------------+------------|
| | Dual speed floppy drive | JP2/jumper 3 | open |
| | supported | | |
|---+----------------------------+--------------+------------|
| » | Parallel Port is set for | JP3 | pins 1 & 2 |
| | LPT1 | | closed |
|---+----------------------------+--------------+------------|
| | Parallel Port is set for | JP3 | pins 2 & 3 |
| | LPT2 | | closed |
|---+----------------------------+--------------+------------|
| » | Parallel Port uses IRQ7 | JP4 | pins 1 & 2 |
| | | | closed |
|---+----------------------------+--------------+------------|
| | Parallel Port uses IRQ5 | JP4 | pins 2 & 3 |
| | | | closed |
|---+----------------------------+--------------+------------|
| | Parallel Port disabled | JP3 | open |
|---+----------------------------+--------------+------------|
| » | Serial Port 1 (CN4) is set | JP5 | pins 1 & 2 |
| | for COM1 | | closed |
|---+----------------------------+--------------+------------|
| | Serial Port 1 (CN4) is set | JP5 | pins 2 & 3 |
| | for COM3 | | closed |
|---+----------------------------+--------------+------------|
| | Serial Port 1 disabled | JP5 | open |
|---+----------------------------+--------------+------------|
| » | Serial Port 1 (CN3) is set | JP6 | pins 1 & 2 |
| | for COM2 | | closed |
|---+----------------------------+--------------+------------|
| | Serial Port 1 (CN3) is set | JP6 | pins 2 & 3 |
| | for COM4 | | closed |
|---+----------------------------+--------------+------------|
| | Serial Port 1 disabled | JP6 | open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| HARD DRIVE CONFIGURATION |
|------------------------------------------------------------|
| Drive | JP2/jumper | JP2/jumper | JP2/Jumper |
| | 1 | 4 | 5 |
|---------------------+------------+------------+------------|
| » | Normal hard | closed | closed | closed |
| | drive operation | | | |
|---+-----------------+------------+------------+------------|
| | Supports CP-344 | open | closed | closed |
| | and WD93048-A | | | |
| | type drives | | | |
|---+-----------------+------------+------------+------------|
| | Secondary hard | closed | open | closed |
| | drive port | | | |
| | address enabled | | | |
|---+-----------------+------------+------------+------------|
| | Supports CP-342 | closed | closed | open |
| | and 3022 type | | | |
| | drives | | | |
|---+-----------------+------------+------------+------------|
| | Disabled | open | open | open |
+------------------------------------------------------------+