(TXT) View Source
       
       # DATA TECHNOLOGY CORPORATION
       
          DTC6180, DTC6280
       
          +------------------------------------------------------------+
          +------------------------------------------------------------+
       
          Data bus: 16-bit, ISA
       
          Size: Full-length, full-height card
       
          Hard drives supported:  Two RLL ESDI drive with 17, 32, or 60
          sector mapping
       
          Floppy drives supported: DTC6180: None
       
          DTC6280: Two 360KB, 720KB, 1.2MB, 1.44MB
       
          Sector interleave: 1:1
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                    Function                     | Location |
          |-------------------------------------------------+----------|
          | 34 pin control cable connector-floppy drive     |    J1    |
          | (DTC6280 only)                                  |          |
          |-------------------------------------------------+----------|
          | 34-pin control cable connector-hard drive       |    J2    |
          |-------------------------------------------------+----------|
          | 20-pin data cable connector-drive 0             |    J3    |
          |-------------------------------------------------+----------|
          | 20-pin data cable connector-drive 1             |    J4    |
          |-------------------------------------------------+----------|
          | 4-pin connector-drive active LED                |    J5    |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |            USER CONFIGURABLE SETTINGS - DTC6180            |
          |------------------------------------------------------------|
          |            Function            |   Location   |  Setting   |
          |--------------------------------+--------------+------------|
          | » | Auto-deselect enabled      |      W1      |   closed   |
          |---+----------------------------+--------------+------------|
          |   | Auto-deselect disabled     |      W1      |    open    |
          |---+----------------------------+--------------+------------|
          | » | Floppy Drive Changed       |      W2      |    open    |
          |   | Signal not driven          |              |            |
          |---+----------------------------+--------------+------------|
          |   | Floppy Drive Changed       |      W2      |   closed   |
          |   | Signal driven low          |              |            |
          |---+----------------------------+--------------+------------|
          | » | Factory configured - do    |      W3      |   closed   |
          |   | not alter                  |              |            |
          |---+----------------------------+--------------+------------|
          | » | Initial interrupt enabled  |      W4      | pins 2 & 3 |
          |   | after reset                |              |   closed   |
          |---+----------------------------+--------------+------------|
          |   | Initial interrupt disabled |      W4      | pins 1 & 2 |
          |   | after reset                |              |   closed   |
          |---+----------------------------+--------------+------------|
          | » | Hard drive port address    | SW1/switch 1 |    off     |
          |   | 1F0-1F7h and 3F2-3F7h      |     & 2      |            |
          |---+----------------------------+--------------+------------|
          |   | Hard drive port address    | SW1/switch 1 |     on     |
          |   | 170-177h and 372-377h      |     & 2      |            |
          |---+----------------------------+--------------+------------|
          | » | BIOS address C800h         | SW1/switch 3 |    off     |
          |---+----------------------------+--------------+------------|
          |   | BIOS address D800h         | SW1/switch 3 |     on     |
          |---+----------------------------+--------------+------------|
          | » | BIOS enabled               | SW1/switch 4 |     on     |
          |---+----------------------------+--------------+------------|
          |   | BIOS disabled              | SW1/switch 4 |    off     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |            USER CONFIGURABLE SETTINGS - DTC6280            |
          |------------------------------------------------------------|
          |            Function            |   Location   |  Setting   |
          |--------------------------------+--------------+------------|
          | » | Auto-deselect enabled      |      W1      |   closed   |
          |---+----------------------------+--------------+------------|
          |   | Auto-deselect disabled     |      W1      |    open    |
          |---+----------------------------+--------------+------------|
          | » | Initial interrupt enabled  |      W4      | pins 2 & 3 |
          |   | after reset (DTC6180 only) |              |   closed   |
          |---+----------------------------+--------------+------------|
          |   | Initial interrupt disabled |      W4      | pins 1 & 2 |
          |   | after reset (DTC6180 only) |              |   closed   |
          |---+----------------------------+--------------+------------|
          | » | Hard drive port address    | SW1/switch 1 |    off     |
          |   | 1F0-1F7h and 3F2-3F7h      |     & 2      |            |
          |---+----------------------------+--------------+------------|
          |   | Hard drive port address    | SW1/switch 1 |     on     |
          |   | 170-177h and 372-377h      |     & 2      |            |
          |---+----------------------------+--------------+------------|
          | » | BIOS address C800h         | SW1/switch 3 |    off     |
          |---+----------------------------+--------------+------------|
          |   | BIOS address D800h         | SW1/switch 3 |     on     |
          |---+----------------------------+--------------+------------|
          | » | BIOS enabled               | SW1/switch 4 |     on     |
          |---+----------------------------+--------------+------------|
          |   | BIOS disabled              | SW1/switch 4 |    off     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    FLOPPY DRIVE DTC6280                    |
          |------------------------------------------------------------|
          |             Drive              |     W2      |     W3      |
          |--------------------------------+-------------+-------------|
          | » | Floppy drive enabled       |   closed    |    open     |
          |---+----------------------------+-------------+-------------|
          |   | Floppy drive disabled      |    open     |   closed    |
          +------------------------------------------------------------+