(TXT) View Source
       
       # ACCULOGIC, INC.
       
          SIDE-4/HP
       
          +------------------------------------------------------------+
          |------------------------------------------------------------|
          | Data bus:     | 16-bit ISA                                 |
          |---------------+--------------------------------------------|
          | Size:         | Half-length, full-height card              |
          |---------------+--------------------------------------------|
          | Hard drive    | Two IDE(AT) interface drives               |
          | supported:    |                                            |
          |---------------+--------------------------------------------|
          | Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB  |
          | supported:    | drives                                     |
          +------------------------------------------------------------+
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                 Function                 |    Location     |
          |------------------------------------------+-----------------|
          | 34-pin cable connector - floppy drive    |       J5        |
          |------------------------------------------+-----------------|
          | 40-pin IDE(AT) connector                 |       J6        |
          |------------------------------------------+-----------------|
          | 10-pin serial port 2 - internal          |       J7        |
          |------------------------------------------+-----------------|
          | 9-pin serial port 1 - external           |       J9        |
          |------------------------------------------+-----------------|
          | 25-pin parallel port - external          |       J10       |
          |------------------------------------------+-----------------|
          | 4-pin connector - drive active LED       |       J12       |
          |------------------------------------------+-----------------|
          | Internal power connector                 |       J13       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |             Function               | Location |  Setting   |
          |------------------------------------+----------+------------|
          | » | IDE primary address enabled    |   JP2    | Pins 2 & 3 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | IDE secondary address is 170h  |   JP2    | Pins 1 & 2 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          | » | IDE(AT) interface enabled      |   JP3    | Pins 1 & 2 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | IDE(AT) interface disabled     |   JP3    | Pins 2 & 3 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          | » | Factory configured - do not    |   JP6    |    N/A     |
          |   | alter                          |          |            |
          |---+--------------------------------+----------+------------|
          | » | Factory configured - do not    |   JP7    |    N/A     |
          |   | alter                          |          |            |
          |---+--------------------------------+----------+------------|
          | » | Floppy primary address enabled |   JP9    | Pins 2 & 3 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | Floppy secondary address       |   JP9    | Pins 1 & 2 |
          |   | enabled                        |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | Floppy secondary address       |   JP9    | Pins 1 & 2 |
          |   | enabled                        |          |   closed   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |           USER CONFIGURABLE SETTINGS (CONTINUED)           |
          |------------------------------------------------------------|
          |            Function             |  Location  |   Setting   |
          |---------------------------------+------------+-------------|
          | »   | Factory configured - do   |    JP11    |     N/A     |
          |     | not alter                 |            |             |
          |-----+---------------------------+------------+-------------|
          | »   | Factory configured - do   |    JP12    |     N/A     |
          |     | not alter                 |            |             |
          |-----+---------------------------+------------+-------------|
          | »   | Floppy drive interface    |    JP15    | Pins 1 & 2  |
          |     | enabled                   |            |   closed    |
          |-----+---------------------------+------------+-------------|
          |     | Floppy drive interface    |    JP15    | Pins 2 & 3  |
          |     | disabled                  |            |   closed    |
          |-----+---------------------------+------------+-------------|
          | »   | Parallel port IRQ 7       |    JP16    | Pins 1 & 2  |
          |     | select                    |            |   closed    |
          |-----+---------------------------+------------+-------------|
          |     | Parallel port IRQ 5       |    JP16    | Pins 2 & 3  |
          |     | select                    |            |   closed    |
          |-----+---------------------------+------------+-------------|
          | »   | IOCHRDY signal disabled   |    JP17    |    Open     |
          |-----+---------------------------+------------+-------------|
          |     | IOCHRDY signal enabled    |    JP17    |   Closed    |
          |-----+---------------------------+------------+-------------|
          |     | IDE(AT) IRQ 15 select -   |    JP18    | Pins 1 & 2  |
          |     | normal                    |            |   closed    |
          |-----+---------------------------+------------+-------------|
          |     | IDE(AT) IRQ15 select -    |    JP18    | Pins 2 & 3  |
          |     | delayed                   |            |   closed    |
          |-----+---------------------------+------------+-------------|
          | »   | IDE(AT) IRQ 14 select -   |    JP19    | Pins 1 & 2  |
          |     | normal                    |            |   closed    |
          |-----+---------------------------+------------+-------------|
          |     | IDE(AT) IRQ14 select -    |    JP19    | Pins 2 & 3  |
          |     | delayed                   |            |   closed    |
          |-----+---------------------------+------------+-------------|
          | »   | Serial port 1 IRQ4 select |    JP22    | Pins 1 & 2  |
          |     |                           |            |   closed    |
          |-----+---------------------------+------------+-------------|
          | »   | Serial port 2 IRQ3 select |    JP22    | Pins 3 & 4  |
          |     |                           |            |   closed    |
          |------------------------------------------------------------|
          | Note: The location of jumper JP17 is unidentified. It may  |
          | be soldered on the board in some models.                   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |              SERIAL PORT 1 ADDRESS SELECTION               |
          |------------------------------------------------------------|
          |       COM        |        JP8         |        JP14        |
          |------------------+--------------------+--------------------|
          | » | COM1 (3F8h)  | Pins 1 & 2 closed  | Pins 1 & 2 closed  |
          |---+--------------+--------------------+--------------------|
          |   | COM2 (2F8h)  | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
          |---+--------------+--------------------+--------------------|
          |   | COM3 (2F8h)  | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
          |---+--------------+--------------------+--------------------|
          |   |   Disabled   | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |              SERIAL PORT 2 ADDRESS SELECTION               |
          |------------------------------------------------------------|
          |       COM        |        JP10        |        JP13        |
          |------------------+--------------------+--------------------|
          | » | COM2 (2F8h)  | Pins 1 & 2 closed  | Pins 1 & 2 closed  |
          |---+--------------+--------------------+--------------------|
          |   | COM1 (3F8h)  | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
          |---+--------------+--------------------+--------------------|
          |   | COM4 (238h)  | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
          |---+--------------+--------------------+--------------------|
          |   |   Disabled   | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |              PARALLEL PORT ADDRESS SELECTION               |
          |------------------------------------------------------------|
          |       LPT        |        JP4         |        JP5         |
          |------------------+--------------------+--------------------|
          | » |  LPT1(378h)  | Pins 1 & 2 closed  | Pins 2 & 3 closed  |
          |---+--------------+--------------------+--------------------|
          |   |  LPT2(278h)  | Pins 1 & 2 closed  | Pins 1 & 2 closed  |
          |---+--------------+--------------------+--------------------|
          |   |   Disabled   | Pins 2 & 3 closed  | Pins 2 & 3 closed  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                PARALLEL PORT DMA SELECTION                 |
          |------------------------------------------------------------|
          |   Channel   |         JP20          |         JP21         |
          |-------------+-----------------------+----------------------|
          |      1      |   Pins 1 & 2 closed   |  Pins 1 & 2 closed   |
          |-------------+-----------------------+----------------------|
          |      3      |   Pins 2 & 3 closed   |  Pins 2 & 3 closed   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |               MISCELLANEOUS TECHNICAL NOTES                |
          |------------------------------------------------------------|
          | Location of pin 1 on all jumpers is not available.         |
          +------------------------------------------------------------+