(TXT) View Source
       
       # BOCA RESEARCH, INC.
       
          IDE500
       
          +------------------------------------------------------------+
          |------------------------------------------------------------|
          | Data bus:     | 16-bit ISA                                 |
          |---------------+--------------------------------------------|
          | Size:         | Three-fourth length, half-height card      |
          |---------------+--------------------------------------------|
          | Hard drive    | Four IDE(AT) drives                        |
          | supported:    |                                            |
          |---------------+--------------------------------------------|
          | Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB |
          | supported:    | drives                                     |
          +------------------------------------------------------------+
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                 Function                 |    Location     |
          |------------------------------------------+-----------------|
          | 40-pin primary IDE(AT) connector         |       J1        |
          |------------------------------------------+-----------------|
          | 4-pin connector - drive active LED       |       J2        |
          |------------------------------------------+-----------------|
          | 34-pin cable connector - floppy drive    |       J4        |
          |------------------------------------------+-----------------|
          | 10-pin serial port 2 - internal          |       J5        |
          |------------------------------------------+-----------------|
          | 9-pin serial port 1 - external           |       J6        |
          |------------------------------------------+-----------------|
          | 40-pin secondary IDE(AT) connector       |       J7        |
          |------------------------------------------+-----------------|
          | 25-pin parallel port - external          |       J11       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |           Function            | Location |     Setting     |
          |-------------------------------+----------+-----------------|
          | » | Primary IDE(AT) uses      |    J8    | Pins 1 & 2, 4 & |
          |   | primary address with      |          |    5 closed     |
          |   |                           |          |                 |
          |   | secondary IDE(AT)         |          |                 |
          |   | disabled                  |          |                 |
          |---+---------------------------+----------+-----------------|
          |   | Primary IDE(AT) uses      |    J8    | Pins 2 & 3, 5 & |
          |   | secondary address with    |          |    6 closed     |
          |   |                           |          |                 |
          |   | secondary IDE(AT)         |          |                 |
          |   | disabled                  |          |                 |
          |---+---------------------------+----------+-----------------|
          |   | Primary IDE(AT) uses      |    J8    | Pins 1 & 2, 5 & |
          |   | primary address and       |          |    6 closed     |
          |   |                           |          |                 |
          |   | secondary IDE(AT) uses    |          |                 |
          |   | secondary address         |          |                 |
          |---+---------------------------+----------+-----------------|
          |   | Primary and secondary     |    J8    | Pins 2 & 3, 4 & |
          |   | IDE(AT) disabled          |          |    5 closed     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |           USER CONFIGURABLE SETTINGS (CONTINUED)           |
          |------------------------------------------------------------|
          |           Function            | Location |     Setting     |
          |-------------------------------+----------+-----------------|
          | » | Floppy drive interface    |    J3    |   Pins 1 & 2    |
          |   | enabled                   |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Floppy drive interface    |    J3    |   Pins 2 & 3    |
          |   | disabled                  |          |     closed      |
          |---+---------------------------+----------+-----------------|
          | » | Serial port 1 is COM1     |   J9A    | Pins 1 & 2, 4 & |
          |   |                           |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 1 is COM2     |   J9A    | Pins 1 & 2, 5 & |
          |   |                           |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 1 is COM3     |   J9A    | Pins 2 & 3, 4 & |
          |   |                           |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 1 disabled    |   J9A    | Pins 2 & 3, 5 & |
          |   |                           |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          | » | Serial port 2 is COM2     |   J9B    | Pins 1 & 2, 4 & |
          |   |                           |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 2 is COM1     |   J9B    | Pins 1 & 2, 5 & |
          |   |                           |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 2 is COM4     |   J9B    | Pins 2 & 3, 4 & |
          |   |                           |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 2 disabled    |   J9B    | Pins 2 & 3, 5 & |
          |   |                           |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          | » | Serial port 1 IRQ4 select |   J9C    |   Pins 1 & 2    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 1 IRQ3 select |   J9C    |   Pins 4 & 5    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 1 IRQ5 select |   J9C    |   Pins 5 & 6    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 1 IRQ7 select |   J9C    |   Pins 2 & 3    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          | » | Serial port 2 IRQ3 select |   J9D    |   Pins 4 & 5    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 2 IRQ4 select |   J9D    |   Pins 1 & 2    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 2 IRQ5 select |   J9D    |   Pins 5 & 6    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Serial port 2 IRQ7 select |   J9D    |   Pins 2 & 3    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          | » | Parallel port address is  |   J10A   | Pins 1 & 2, 4 & |
          |   | 378h                      |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Parallel port address is  |   J10A   | Pins 1 & 2, 5 & |
          |   | 278h                      |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Parallel port disabled    |   J10A   | Pins 2 & 3, 4 & |
          |   |                           |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          | » | Parallel port is          |   J10B   | Pins 1 & 2, 4 & |
          |   | unidirectional            |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Parallel port EPP mode    |   J10B   | Pins 1 & 2, 5 & |
          |   | select                    |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Parallel port ECP mode    |   J10B   | Pins 2 & 3, 4 & |
          |   | select                    |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | Parallel port IEE1284     |   J10B   | Pins 2 & 3, 5 & |
          |   | mode select               |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          | » | No DMA channel selected   |   J10C   |      Open       |
          |---+---------------------------+----------+-----------------|
          |   | DMA channel 1 select (ECP |   J10C   | Pins 1 & 2, 4 & |
          |   | & IEE1284 modes only)     |          |    5 closed     |
          |---+---------------------------+----------+-----------------|
          |   | DMA channel 3 select (ECP |   J10C   | Pins 2 & 3, 5 & |
          |   | & IEE1284 modes only)     |          |    6 closed     |
          |---+---------------------------+----------+-----------------|
          | » | Primary IDE(AT) IRQ 14    |   J10D   |   Pins 1 & 2    |
          |   | select                    |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Primary IDE(AT) IRQ 15    |   J10D   |   Pins 2 & 3    |
          |   | select                    |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Secondary IDE(AT) IRQ 14  |   J10D   |   Pins 1 & 2    |
          |   | select                    |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Secondary IDE(AT) IRQ 15  |   J10D   |   Pins 2 & 3    |
          |   | select                    |          |     closed      |
          |---+---------------------------+----------+-----------------|
          | » | Parallel port IRQ7 select |   J12    |   Pins 1 & 2    |
          |   |                           |          |     closed      |
          |---+---------------------------+----------+-----------------|
          |   | Parallel port IRQ5 select |   J12    |   Pins 2 & 3    |
          |   |                           |          |     closed      |
          +------------------------------------------------------------+