CARDINAL TECHNOLOGIES, INC. =========================== WARPSPEED GRAPHICS DISPLAY ADAPTER VGA256 Card Type Video card Video Chip Set Weitek Highest Resolution Supported 1280 x 1024 Maximum Video Memory 2MB VRAM (location unidentified) Data Bus 32-bit VESA Local Bus Video Types Supported XVGA +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | |-------------------------------+----------------------------| | 15-pin analog video port | CN1 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |-----------------------------------------+-------+----------| |>> | 16-bit memory accesses to frame | S1/1 | Off | | | buffer | | | |---+-------------------------------------+-------+----------| | | 8-bit memory accesses to frame | S1/1 | On | | | buffer (for monochrome cards) | | | |---+-------------------------------------+-------+----------| |>> | W5186 interrupt signal not | S1/2 | Off | | | connected to ISA bus | | | |---+-------------------------------------+-------+----------| | | W5186 interrupt signal is connected | S1/2 | On | | | to ISA bus | | | |---+-------------------------------------+-------+----------| |>> | Zero wait state enabled | S1/3 | On | |---+-------------------------------------+-------+----------| | | Zero wait state disabled | S1/3 | Off | |---+-------------------------------------+-------+----------| |>> | 16-bit BIOS ROM selected | S1/4 | On | |---+-------------------------------------+-------+----------| | | 8-bit BIOS ROM selected | S1/4 | Off | |---+-------------------------------------+-------+----------| |>> | Setting if S1/1 is Off | S1/5 | On | |---+-------------------------------------+-------+----------| | | Setting if S1/1 is On | S1/5 | Off | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | S1/8 | N/A | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE I/O ADDRESS SELECTION | |------------------------------------------------------------| | Setting | S1/6 | S1/7 | |------------------------+------------------+----------------| |>> | C000h | On | On | |----+-------------------+------------------+----------------| | | D000h | On | Off | |----+-------------------+------------------+----------------| | | E000h | Off | On | |----+-------------------+------------------+----------------| | | F000h | Off | Off | +------------------------------------------------------------+