APPIAN TECHNOLOGY ================= JERONIMO J2/N (4MB) Card Type Video card Video Chip Set Cirrus Logic Highest Resolution Supported 1600 x 1200 Maximum Video Memory Unidentified Data Bus 32-bit PCI Video Types Supported CGA, VGA, TARGA, XVGA +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------+-------+----------------------+-------| | 15-pin analog video | CN1 | VESA feature | CN3 | | port 1 | | connector | | |---------------------+-------+----------------------+-------| | 15-pin analog video | CN2 | | | | port 2 | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |---------------------------------+-----------+--------------| | | Channel 1 interrupt enabled | JP1 | Pins 2 & 3 | | | | | closed | |---+-----------------------------+-----------+--------------| | | Channel 1 interrupt | JP1 | Pins 1 & 2 | | | disabled | | closed | |---+-----------------------------+-----------+--------------| | | Channel 2 interrupt enabled | JP2 | Pins 2 & 3 | | | | | closed | |---+-----------------------------+-----------+--------------| | | Channel 2 interrupt | JP2 | Pins 1 & 2 | | | disabled | | closed | |---+-----------------------------+-----------+--------------| |>> | Factory configured - do not | JP12 | Unidentified | | | alter | | | |---+-----------------------------+-----------+--------------| |>> | Factory configured - do not | JP13 | Unidentified | | | alter | | | |---+-----------------------------+-----------+--------------| | | Primary VGA enabled | JP100 | Open | |---+-----------------------------+-----------+--------------| | | Primary VGA disabled | JP100 | Closed | |---+-----------------------------+-----------+--------------| |>> | Factory configured - do not | JP101 | Unidentified | | | alter | | | |---+-----------------------------+-----------+--------------| |>> | Factory configured - do not | JP102 | Unidentified | | | alter | | | |---+-----------------------------+-----------+--------------| |>> | Factory configured - do not | JP103 | Unidentified | | | alter | | | |---+-----------------------------+-----------+--------------| | | Channel 1 CSYNC | JP104 | Closed | | | compatibility enabled | | | |---+-----------------------------+-----------+--------------| | | Channel 1 CSYNC | JP104 | Open | | | compatibility disabled | | | |---+-----------------------------+-----------+--------------| | | Channel 2 CSYNC | JP107 | Closed | | | compatibility enabled | | | |---+-----------------------------+-----------+--------------| | | Channel 2 CSYNC | JP107 | Open | | | compatibility disabled | | | |---+-----------------------------+-----------+--------------| | | Manual bottom channel slot | JP300/301 | Pins 1 & 2 | | | selection enabled | | closed | |---+-----------------------------+-----------+--------------| | | Automatic bottom channel | JP300/301 | Pins 2 & 3 | | | slot selection enabled | | closed | |---+-----------------------------+-----------+--------------| | | I2C communication channel | JP400/401 | Open | | | enabled | | | |---+-----------------------------+-----------+--------------| | | I2C communication channel | JP400/401 | Closed | | | disabled | | | |------------------------------------------------------------| | Note: | | | | Location and orientation of factory configured jumpers | | JP12, JP13, JP101 & JP103 are unidentifed | +------------------------------------------------------------+