ZOLTRIX, INC.
=============

   FM-288I

   Card Type              Modem, Fax                              
   Chip Set               Rockwell                                
   I/O Options            Line in (RJ-11), line out (RJ-11)       
   Maximum Modem Rate     28.8Kbps                                
   Maximum Fax Rate       14.4Kbps                                
   Data Modulation        Bell 103A/212A                          
   Protocol                                                       
                          ITU-T V.21, V.22, V.22bis, V.32,        
                          V.32bis, V.34                           
                                                                  
                          Rockwell V.FC                           
   Fax Modulation         ITU-T V.17, V.21 CH.2, V.27ter, V.29    
   Protocol               
   Error                  MNP5, V.42, V.42bis                     
   Correction/Compression 
   Fax Class              Class I & II                            
   Data Bus               8-bit ISA                               
   Card Size              Half-length, full-height card           

<gopher://bitreich.org/I/th99/t/U-Z/54838-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |        Function        |  Label   |   Function   |  Label  |
   |------------------------------------------------------------|
   | Line out                    |    CN1     | Line in  | CN2  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    SERIAL PORT ADDRESS                     |
   |------------------------------------------------------------|
   |      Setting       |       SW1/5       |       SW1/6       |
   |--------------------+-------------------+-------------------|
   |    COM1 (3F8h)     |        On         |        On         |
   |--------------------+-------------------+-------------------|
   |   i COM2 (2F8h)    |        Off        |        On         |
   |--------------------+-------------------+-------------------|
   |    COM3 (3E8h)     |        On         |        Off        |
   |--------------------+-------------------+-------------------|
   |    COM4 (2E8h)     |        Off        |        Off        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     INTERRUPT SETTINGS                     |
   |------------------------------------------------------------|
   |   IRQ    |  SW1/1  |  SW1/2  |  SW1/3  |  SW1/4  |  SW1/7  |
   |----------+---------+---------+---------+---------+---------|
   |   IRQ2   |   Off   |   Off   |   Off   |   Off   |   On    |
   |----------+---------+---------+---------+---------+---------|
   |  i IRQ3  |   Off   |   Off   |   Off   |   On    |   Off   |
   |----------+---------+---------+---------+---------+---------|
   |   IRQ4   |   Off   |   Off   |   On    |   Off   |   Off   |
   |----------+---------+---------+---------+---------+---------|
   |   IRQ5   |   Off   |   On    |   Off   |   Off   |   Off   |
   |----------+---------+---------+---------+---------+---------|
   |   IRQ7   |   On    |   Off   |   Off   |   Off   |   Off   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   SUPPORTED COMMAND SET                    |
   |------------------------------------------------------------|
   |                     Basic AT Commands                      |
   |------------------------------------------------------------|
   | AT, '+++', A/                                              |
   |------------------------------------------------------------|
   | A, B, C, D, E, F, H, I, L, M, N, O, P, Q, T, V, W, X, Y, Z |
   |------------------------------------------------------------|
   | &C, &D, &F, &G, &J, &K, &L, &M, &P, &Q, &R, &S, &T, &V,    |
   | &W, &X, &Y, &Z                                             |
   |------------------------------------------------------------|
   |                    Extended AT Commands                    |
   |------------------------------------------------------------|
   | \A, \B, \G, \K, \L, \N                                     |
   |------------------------------------------------------------|
   | %C, %E, %L, %Q                                             |
   |------------------------------------------------------------|
   |                        S Registers                         |
   |------------------------------------------------------------|
   | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12,     |
   | S14, S16, S18, S21, S22, S23, S25, S26,                    |
   |------------------------------------------------------------|
   | S27, S29, S30, S32, S33, S36, S37, S38, S40, S41, S46,     |
   | S48, S82, S86, S95                                         |
   |------------------------------------------------------------|
   |                      Special Commands                      |
   |------------------------------------------------------------|
   | +MS                                                        |
   |------------------------------------------------------------|
   | Note: See MHI Help File for full command documentation.    |
   +------------------------------------------------------------+

                     Proprietary AT Command Set

                                  

   +------------------------------------------------------------+
   |                            DIAL                            |
   |------------------------------------------------------------|
   | Type:        | Immediate                                   |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] D<#> [cmds]                       |
   |--------------+---------------------------------------------|
   | Description: | Dials telephone number according to any     |
   |              | modifiers included in the string            |
   |--------------+---------------------------------------------|
   | Note:        | Any combination of modifiers can be used to |
   |              | produce the desired dial functions in       |
   |              | sequence.                                   |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      DP      | Pulse dialing enabled                       |
   |--------------+---------------------------------------------|
   |     i DT     | Tone dialing enabled                        |
   |--------------+---------------------------------------------|
   |      DW      | Dialing resumed following dial tone         |
   |              | detection                                   |
   |--------------+---------------------------------------------|
   |      D,      | Dialing paused for amount of time specified |
   |              | in S8 register                              |
   |--------------+---------------------------------------------|
   |      D/      | Set dialing delay for 0.125 seconds         |
   |--------------+---------------------------------------------|
   |      D!      | Flash function initiated. Modem commanded   |
   |              | to go off-hook for specified time before    |
   |              | returning on-hook.                          |
   |--------------+---------------------------------------------|
   |      D@      | Wait for Quite Answer function enabled.     |
   |              | Modem waits until a "quiet answer," a       |
   |              | ring-back signal followed by silence up to  |
   |              | the time specified in S7, is received prior |
   |              | to executing the rest of the dial string.   |
   |--------------+---------------------------------------------|
   |      D;      | Modem returned to idle state after dialing. |
   |              | The semicolon can only be placed at the end |
   |              | of the dial command.                        |
   |--------------+---------------------------------------------|
   |      D^      | Dialing paused for 5 seconds                |
   |--------------+---------------------------------------------|
   |      DR      | Reverse mode enabled. Modem uses Answer     |
   |              | mode frequencies to modem set to Originate  |
   |              | Only mode.                                  |
   +------------------------------------------------------------+